I want to keep track of housekeeping attendants' average productivity of rooms cleaned per day/shift for the last 10 days worked.
I need a formula which will give me an average of the 10 most recent cells with a value (0 should be counted).
I also want to have each month in a separate tab, and for the formula described above to average between two tabs should the 10 days cross-over.
Excel 2010 Higher than past average formula?
Im using Excel 2010 and want to make a formula that will High light the number when it exceeds the past 30 days average. My information is listed vertically in row F..
I would like to calculate how many days past since the special Cell have been filled with data.
For exampl:
If Cell A1 filled with the data in Cell B1 I need to show the day number, if I close the file and open it next day it will show number 1 as a one day past.
I am trying to create a spread sheet in excel that will show a number of days past due counting from the due dates. see the attached xls file for details.
View 5 Replies View RelatedI want to take a timestamp and make a condition. that condition would be if that timestamp is greater then 30 days from entered then highlight that cell field. Can some one shed some light on how they would be written.
EXample ( todays date) 30days later
I currently have a sheet that shows monthly tasks and their due dates. There is also a control that when clicked, resets the due date to the following month of the same day.
What I would like to do is setup some type of reminder such as either flash the due date cell if possible or change the fill color. It should do this when the system date is = to or 4 days before the due date.
The only way I can see doing this is using VBA, which I do not know very well.
I have spent too many hours Googling and trial with mostly error in attempting this. I formatted the very first cell A1 for today's date =TODAY(); this is also dirrectly above the column with all the dates in it. I just want an entire row's contents to turn red if it is 15 days old or older. This =$A1<TODAY()-15 somewhat works, but it only turns the date cell red, not the whole row. It also makes blank cells turns red, which I would like to remain blank (another formula is needed I imagine).
View 3 Replies View RelatedI have following data
Column A Name of the company
Column B Date
Column C Day
Column D Week of the Year
Column E High Price
Column F Low Price
My requirement is I need the average high price for the first three days of the week i.e Mon, Tue, Wed in Column I and average Low Price for the remaining days is Thu, Fri, Sat , Sun in Column J.
If in some case any day is missing then average high / Low price for the next two days is to be calculated.
I have a spreadsheet with dates running down column J, and a number running down column K. I want to average the numbers in column K for all the rows that are less than 30 days old.
I have a formula for determining if a date is less than a month old:
=IF(DATEDIF(J2,TODAY(),"d")<31,TRUE,FALSE)
How can I translate that into averaging a range?
I'm using Excel 2003
I would like to find the average number of days events take from start to finish.
My data is in 3 columns:
EventName StartDate EndDate
I have a ton of EventNames, each of which have a StartDate. But I want to calculate the average days to complete only for those EventNames that have EndDates.
So, if a cell in the column EndDate is greater than zero, then take that cell, subtract it from the corresponding cell in the StartDate column; Add all of them together and divide by the count of those rows in the EndDate column that have a value.
How do I put this in excel terms? ....
I need to calculate the average amount of days it is taking for files to be processed. Here is the example I have.
Assuming that B1=0 and C1=1 (in the # of days row)
# of Days 0123456789101112131415Total Files
File Count011712113203000000049
I have a worksheet containing 5 columns. A start and end date, a number of days between these dates, the quarter number of the start date (i.e. 1 to 4) and then the year.
I want to calculate the average number of days per quarter so an average of days in column C, based on the details in column D and E.
I need a formula to determine the average number of days between sales transactions for each item in inventory. There are several hundred different item numbers with thousands of transactions.
I have attached an example of what I'm looking for. I've toyed around with Average and If functions but can't seem to get it right.
Avg Number of Days - Excel Help.xlsx‎
My sheet looks like this - example:
ID Dates CombinedAverageDaysFromID
0001 2012-02-01 ?
0001 2013-08-10
0001 2013-10-10
0402 2011-01-02 ?
0402 2013-01-05
0402 2013-01-22
0003 2009-02-04 ?
0003 2009-12-04
0003 2010-01-04
0003 2010-03-03
0003 2010-08-02
0003 2012-04-04
0003 2013-01-05
0003 2013-10-03
I need to calculate the average days between the dates for each ID? How do I do this?
I'm trying to complete an excel project for work that keep track of orders from several systems as they come in. Every time I get a new order I put the name of the part ordered in column B4:B5000 and have it set to automatically datestamp that days date in column D4:D5000. The problem I'm running into is that on a separate sheet I want to keep track of the average time between orders while also skipping any blank cells and returning a 0 instead of a div/0 error if the sheet has no orders. For Instance:
Widgets
100
10/15/14
Sprockets
44
10/20/14
Cogs
60
10/25/14
The answer I would be looking for here should be 5 skipping over the blank row. I've scoured the net and tried numerous formula but nothing seems to work.
These functions are returning the wrong answer of zero in col GJ , I have put correct answers into col GO
They are looking at the dates in cols FP to FR , then averaging all margins
I'm working on building a workbook to track sales progress, and I'd like to perform an analysis on some of the data with regards to sales efficiency.
To simplify:
Column A = Initial Contact Date (mm/dd/yyyy)
Column B = Close Date (mm/dd/yyyy)
As an example, I would like to calculate the average number of days between the Initial Contact Date and the Close Date to calculate the average number of days in the prospecting cycle. Basically, the formula should function as AVERAGE((B1-A1)+(B2-A2)+(B3-A3)...) and so on for the entire column.
I know one solution would be to insert a new column that performs the subtraction between the two dates, and then I could AVERAGE this new column. However, I want to perform similar calculations to analyze the time period between other key milestones in the prospecting cycle - rather than have a lot of extra columns in my sheet, I was wondering if there's some type of array formula that will calculate what I need.
I have a file that's almost 3000 rows of data I have attached a test file for the purpose of this request. I am trying to figure out the average days overdue per department whose due dates have not already passed.test (1).xlsx
View 2 Replies View RelatedI am trying to get an average number of Networkdays where specific cell values are true. If the project Status is 'ongoing' or 'overdue' in Sheet2, what is the average Networkdays of the open projects for each project lead for Column C in Sheet1?
Sheet1
Column A
Column B
Column C
Project Lead
Count of Projects
Avg Age of Projects
John
3
[Code] ..........
I have a workbook with two sheets. The first has a list of job positions open, columns designated to stages in the employment process and in these columns, my staff enter the dates that they completed a particular stage.
"Position | Date Opened | Stage 1 | Stage 2 | Stage 3 | Stage 4"
Pos 1 | 01/01/2014 |02/01/14|03/01/14|07/01/14|09/01/14
This has a great number of entries and they are increasing and decreasing every day depening on the amount of jobs available.
On the second sheet, I am trying to set up a table which shows the average working days it is taking to complete each stage, divided into the months in which the job position was opened (i.e. for positions opened in january, the average completion working days for stage 1 was X amount of days etc...)
I have tried using =IF(AND(Logical, Logical),TRUE,FALSE) but this doesn't return any info as the logicals will always be false. I tried the OR function, but that requires only one of the criteria to be true to return a value. What I need is for the formula to return a number of days between two dates, ONLY if the opened date falls in one month.
Using Excel 2010.
I am trying to come up with a formula that will return a total average from two columns of dates with criteria. The range will need to cover an entire column as my data is continuously growing and the criteria would have to limit the start date to each month. I have tried
=AVERAGEIFS(DAYS360(A:A,B:B),A:A,">5/1/2012",A:A,"5/1/2012",A:A,"
I have a series of data that acts upon a traffic light system, i.e. Green, Amber and Red. These variables are posted along row 1 for example and there are 10 columns. Per column I have a tick and cross to answer a question. How can I find out how many ticks were on green days, amber days and red days? I have attached an example.
View 4 Replies View RelatedThere are dates in column C and I need to count how many days are coming due within 90 days of each date based on the today() function but do not exceed the 90 days.
Countif Today()+90
I am making process TAT(Turn Around Time) which required following information. In Excel 2007.
1-Count number of days between two dates where working days are (Sun to Thursday). So required to exclude (Friday,Sat + Holidays)
A1-Start Date Mar/01/2014
B1-End Date Mar/31/2014
C1-No Of Days 22
D1-Days between two dates 21
E1 To E10-Holidays
2-Count number of days between two dates where working days are (Sat to Thursday). So required to exclude (Friday + Holidays)
A1-Start Date Mar/01/2014
B1-End Date Mar/31/2014
C1-No Of Days 27
D1-Days between two dates 26
E1 To E10-Holidays
Note : Any weekend (off days) dates listed in holidays should not effect the query.
I'm basically looking for a forumla that will count each employees total scheduled work days for the month inserted and then depening upon the day it is will show how many days the employee has left to work for the month.
View 9 Replies View RelatedI need this code to also add the formula to one past the last Row
Now it goes down column A and if its not null it puts a formula in column D. I need it to also put the formula in column D one row past the LastRow of Column A.
Dim A As Long
Dim lastrowA As Long
With Sheets("Children")
[Code].....
Here is what my table is im working with. The tite "todays date starts in Cell A1 and B1 is =Today().
I need to figure out how to do an if for the over 30,60,90 past due. Here the logic I need to figure out:
in the Over 30 column, the logic of the statement is as follows: If the difference between today's date and the date of the invoice is greater than 30 and equal to or less than 60, the amount goes into this column.(over 30 E3) To get the amount(the ammount in C3) into the Current column, the difference between the two dates must be less than 30. To get into the over 90 column, the difference between the two dates must be greater than 90. You can figure out the over sixty column. And this needs to be copied to the remaining colums
Today’s date: =TODAY() Shop Invoice Date Invoice Amount Current Over 30 Over 60 Over 90 Ludwig's Landromat =TODAY()-72 $432.78 Willie's Washing =TODAY()-107 $565.11 Wash It Here =TODAY()-80 $308.47 Spiffy Wash and Dry =TODAY()-58 $725.37 Water Soap & Hot Air =TODAY()-30 $427.95 Wash it & Dry it =TODAY()-90 $603.91 Acme Wash & Dry =TODAY()-60 $332.35 Totals
How can I convert the number of days for example 366 days to years, months, days 366=1year, 0 months, 1 day
View 3 Replies View RelatedI have a spreadsheet in 2007. Days across the top for an entire year. So 365 columns. I need a macro to extract the 3 previous days , today's column, and the 3 next days and load to a different worksheet.
HTML worksheet A:
1/1/09, 1/2/09..... 10/17/09, 10/18/09, 10/19/09, 10/20/09, 10/21/09 .... 12/31/09
10 11 ... 14 15 17 12 22 ... 28
a g ... g c d d a ... a
the macro would create a worksheet B(if run on 10/19/09):
10/17/09, 10/18/09, 10/19/09, 10/20/09, 10/21/09
14 15 17 12 22
g c d d a
I've got the below so far, but where it says V2>=(Q2+5) , I would like it to add 5 working days instead, is this possible?
Code:
=IF(AND(T2="Awaiting",V2>=(Q2+5)),"Overdue","Raised within 5 Days")
It would also be great if there is a way to say that if T2="Not Required, then put "Not Required" in W2 (where the IF statement is)