Some of my numeric values are with single decimals .....
Eg:
1542.2
9856.5
659855.9
2589.7
When I format in Excel with Number with 2 decimals my results remain the same
But the result which is need is:
1542.20
9856.50
659855.90
2589.70
I need to have textBox2. formatted to a number with 3 decimal places.
The code below is executed from the command button.
Code:
Private Sub CommandButton1_Click()
If IsNumeric(Me.TextBox1.Value) Then
Me.TextBox2.Value = Me.TextBox1.Value / 25.4
End If
End Sub
I found the code below but I cannot seem to figure it out
Code:
Private Sub TextBox2_Change()
TextBox2.Text = Format(Number, "0.000")
End Sub
Basically, I want to format a group of cells to display 1 decimal figure if the number is not a whole number. If the number is a whole number (or if the rounded first decimal place is 0) I want it to display no decimal.
View 9 Replies View RelatedI have a vba macro that takes data from one workbook and pastes it into another workbook. In doing this I have declared a few variables of type single (I only need two decimal precision). However, when I copy the values from the cells on the source workbook and paste them into the target workbook, the numbers end up having 12 decimal places. Ultimately, this extra precision causes my totals to be off by .01 or more after a while. I have tried rounding the number as I pull it off the source workbook into the variable, but that didn't matter. How do I solve this problem? Code for pulling data from source workbook:...
View 2 Replies View RelatedI need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.
View 2 Replies View RelatedI have a spread sheet where there are multiple rows of price quotes from different suppliers.
Some suppliers have quoted, some however have not and there is a "#N/A" or "no bid".
SupplierA
SupplierB
SupplierC
SupplierD
1.3
No Bid
2.3
No Bid
How can I get a conditional format to check each row for the lowest numeric bid, highlight it but ignore the text?? What I have tried so far doesn't work.
=G31=MAX($G$31:$J$31)
This does not seem to work, I don't know how to exclude the text values from the MAX function.
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
How can I drop the whole number part of a number and leaving only the decimal part of the number. Then multiply the decimal part of the number with a number. Then repeat this in a sequence. The object is to convert Lat and Long decimals to Hr. Min. Sec.
eg. 53.535663 .535663*60=32.13978 .13978*60=8 53 32 8
eg. 113.352640 .352640*60=21.1584 .1584*60=9 113 21 9
eg. 113.306579 .306579*60=18.39474 .39474*60=23 113 18 23
if I change the formatting of a cell to 2 decimal places, it appears as two decimal places (as it should) for example $88.88888 will show as $88.88
However, when I use this data in another application that displays this data it will display as 88.88888 still. I need to actually take the value and truncate it to 88.88 eg 8.8888888 will become 8.88
I have been using trunc by hand and wanted to try and find out if there is a way that I could write some sort of macro to do this for me each time.
Is it possible to set conditional formating so the cell is filled with color only if a value in the cell has more then 2 decimal digits?
It doesn't matter if I set the cell formating to show only 2 decimal digits, it still contains a value with more digits and that causes an error. I need to make it visible for viewers.
The value itself is being pasted by users so they don't even know it has more then 2 decimal digits as they paste the value with formating as well.
I need a formula to take a number with several decimal places and round it up to two decimal places to either .33, .66 or, .00 if its above .66.
For example, 4.23423423423423 will be 4.33
4.43453453533434 will be 4.66
4.8353453453 will be 5.00
Lets say the number is in cell A1. What formula would do this?
Is it possible to Conditionally Format using the (Custom) Data Validation Tool one or both of the following conditions:-
1. Force the user to enter the correct decimal point position for a given currency :-
The are 3 different decimal point locations location's - 0.87624 / 123.123 / 1273.00 There are always 6 numerals We have a table to lookup which specifies where the decimal point is on all currencies
CURRENCY AUDUSD< List is linked to a table
Price - High 0.87744< Decimal point dependant on chosen currency pair chosen
Price - Low 0.86596
Price - Close 0.86823
2. As above but numbers once entered will be formatted accordingly to the correct decimal place to the corresponding currency
I'm looking to see if there is a way to take the decimal place formatting of cell and apply it to other cells.
For example, if someone types in 0.0001 into a source cell, I'd like to take that decimal formatting and apply it to other destination cells. This way when values are typed into those cells it will automatically display 4 places past the decimal, no matter what the value. ie 50 will display 50.0000
I know the basics of excell, but haven't ever written any formulas or macros (if that's what I need?) that would perform the following opperations. Bare with me, it's a three step process.
1. I need any zero's to the right of the last number (1-9)
to be removed. (I think this can be done with the click of a button, somewhere?)
examples:
a. 173.17300 = 173.173
b. 231.11000 = 231.11
c. 53.00000 = 53.
2. I also need for the decimal to be moved to the right of the last number after the zeroes have been removed from the previous step. (This seems to be the most deficult step, but most important for me.)
examples:
a. 173.173 = 173173
b. 231.11 = 23111
c. 53. = 53
3. I then need to be able to cross reference those remaining numbers with a set of numbers I have.
examples:
Remaining Numbers / My List
a. 173173 / Not on list
b. 23111 / MATCH
c. 53 / Not on list
i want to do something that should be relatively simple, and yet it is not... has me stumped. what i'm doing: taking a range of numbers... from 1-19, 20-39, and so on, and using a vlookup function to pin a rating for said value off a reference table. heres a example of what i'm doing:
A | B
1 1
2 1
3 1
4 1
5 1
... ...
19 1
20 2
... ...
40 3...................
I would like to enter whole numbers but have them convert to decimal. I have searched and found a solution, but it only references to one column and I need to reference other columns as well. I tried to edit but I’m not very knowledgeable with code. Here is an example of what I am looking for, columns E31:E52, F31:F52, L31:L52, M31:M52, N31:N52. Could someone provide a code to acquire these results?
View 9 Replies View RelatedI'm looking for a formula to break number in to decimal . Which means for 5 digits i.e 12555 to 12.5 and 4 digits i.e 1555 to 1.5
View 4 Replies View RelatedI am facing few problems with excel ever since I updated windows 8 to windows 8.1. Whenever i try to enter a decimal number in excel, say for eg. 3.4, it reformats to date- Apr03. I even changed the date and time formats for eg. short date is formatted to dd/MM/yy and long date to d MMMM yyyy. The format is set to enlgish (uk).. what should i do?
View 1 Replies View RelatedI am trying to figure out how to insert a decimal into a number. For ex: 1234 to become 12.34. I tried creating custom or special formatting but I cannot figure it out.
View 3 Replies View Related I am trying to format my lat and longs in order for Fusion Tables to be able to geocode them. I have it down to where I have separated the lat and longs into their own column. I started with this
>Point>-77.056124,35.552686,0.0
my long issues are -78.335,35 i need to get rid of ,35My lat issues are
434.011400
i need to get rid of the 4 in 434
I have column A which shows the quantity of a product that I have in stock
A1: 20
A2: 20
A3: 20
I also have column D which shows an increasing income, the amount of the increase varies daily but what I need to achieve is that every time cell D is greater than 50 then cell A4 should be the sum of A3 + the number of '50's that were in D3.
So in this example A4 would increase to 22 (because I can spend 100 on 2 items of stock) and cell E3 would show the balance. In this example its 7.35
D1: 18.23
D2: 42.84
D3: 107.35 E3: 7.35
I need a formula to take the numbers listed in cells D4:D50
If below 1,000,000 than just keep that number value
EXAMPLE DATA
If the Ten Thousands place is 5 or below leave the same if it is higher round up. (use this concept for ALL PLACE VALUES
1,500,000 to 1.5 million (if the rest are zeros)
4,000,000 to 4 million
1,564,535 than to 1.57 million
1,545,535 than to 1.54 million
1,555,000 than to 1.55 million
Same concept for the rest as the Millions (move the rounded place up as needed)
So for Billions it would be 10 Millions place (to round form) I think lol
1,000,000,000 to 1 Billion
1,500,000,000 to 1.5 Billion
1,560,000,000 to 1.57 Billion
1,578,000,000 to 1.58 Billion
1,700,000,000 to 1.7 Billion
I would like this to continue all the way up to place value 999 QUADILLION! (if possible) if the value can go bigger that would be great!
How do I seperate 1.2 and 1.02 miutes from the same column into Minutes and Seconds Correctly.
How do I get the first to seperate as (1) Min (20) Secs and the next to
seperate to (1) Min (2) Secs
I have 200,000 line of data in one column with times from .o1 mins to 1498.40 mins that I am doing this to. I need to convert it all back to seconds.
I want to show (in a cell) how much decimals there are after a comma.
View 9 Replies View Relatedhow do i get the numbers after the point.
View 9 Replies View RelatedIs there a way to format a number into 2 decimal places and when you select the cell you wont see the true value?
For example:
316.2696
I still see the 316.2696 when I click the cell. Instead of 316.27 only.
How to make a date into a decimal number. For example, Dec 14 I need to convert to 11.45
Its basically the number of months and days that have gone by in that calender year. So the 11.45 is "11 months" have gone by and the .45 is the days that have gone by in the month of December. (the 14th day divided by 31 the total in December = .45)
So another example would be Feb 3rd. My conversion would be 1.10 (1 month has gone by in the calender and 3 days into the month, 3 / 28 = .10 so Feb 3rd is now 1.10)
June 20th = 5.66
Im creating a form so that my employees wont have to hand write these anymore and reduce all the human errors. Its to calculate income for my borrowers. I want them to be able to enter todays date and have excel convert that date into the decimal form. Then they can enter a Year to Date $ amount and that will calculate a monthly income.
< $ amount * decimal date = monthly income YTD>
I need to add a decimal point to a column of numbers. For example, where it says 126 needs to be changed to 1.26, 3035 changed to 30.35, 13593 to 135.93 and so on. Can this be done automatically or with a formula?
View 2 Replies View Relateda1 -> 2.333.33 "i want this to return as 2,333.33"
a2 -> 33.33 "i want this to retun 33.33"
a3 -> 45.555.55 "i want this to return 45,555.55"
i already asked this question and someone gave me this code -> substitute(a1,".","",1) which return to 2333.33 but the problem is for the a2 if i use the code it will return as "3333" which read as "3,333".
Is there any way that we can determine if the values have two decimal point before it will run the command?
I have a few cells that contain decimals that do not appear as decimals. If the number is 50.1, it only shows up as 50 in the cell. I've tried formatting it to a number with 2 decimal places and to scientific and when I do that the number displays as ##. When I do general formatting it only appears as 50.
I used a formula to pull the number into a different cell, however, and in that cell it shows up as 50.1.
Is there anything I can do to make it show up as 50.1 in the original cell?