Number Won't Display With Decimal Points?
Jul 3, 2013
I have a few cells that contain decimals that do not appear as decimals. If the number is 50.1, it only shows up as 50 in the cell. I've tried formatting it to a number with 2 decimal places and to scientific and when I do that the number displays as ##. When I do general formatting it only appears as 50.
I used a formula to pull the number into a different cell, however, and in that cell it shows up as 50.1.
Is there anything I can do to make it show up as 50.1 in the original cell?
View 2 Replies
ADVERTISEMENT
Jul 17, 2007
Is there some kind of function that will remove decimal points from a number? What I'm looking for is:
1231.5 = 12315
123.15 = 12315
12.315 = 12315
1.2315 = 12315
View 6 Replies
View Related
Oct 24, 2012
I have tried, through control panel - region settings etc, to change the default number of decimals to 0. I often use the Number format using the shortcut CTRL + SHIFT + 1 but then have to reduce the 2 decimals down.
I have recorded a macro to apply this kind of formatting but the disadvantage of this is that I cannot undo any actions before that point - which has gotten me into some trouble on a few occasions .
Is there a macro that I can use that adjusts the "Normal" cell style number format from General to Number (with thousand separator but 0 decimals) each time I open a new book? As merging cell styles is also quite a mundane task..
View 5 Replies
View Related
Sep 29, 2009
I've tried to look for a solution on the forum, but nothing seems to come up. I've attached a file to help show what I'm trying to resolve.
Column A of the file shows an amount, when summed, give a total of -3.5725E-09.
Each of the figures in column A only has 2 decimal points and if I manually total up the numbers on a calculator it give me zero.
Does anyone know how I can get rid of the -3.5725E-09 without another formula? I need the balance to be zero.
View 10 Replies
View Related
Nov 18, 2008
I am in need of a macro which would be capable of doing the following;
Replacing a sequence of number's & decimals such as 58.6073.1 with 58607310000
Essentially, the code will just need to remove the two decimal points & to suffix those 4 zeros onto the end of the number sequence.
View 3 Replies
View Related
Mar 5, 2009
I beleive it is because the formulas are not rounding the figures to the nearest 2 decimal points. so some costs are 1 or 2 pence out. OK on a small qty not so good on a large qty.
I dont know how to do this as the roundup function only rounds up i need it to round to the neareast 2 decimal points. Also dont know how to integrate it into existing formulas and macros
View 5 Replies
View Related
Feb 10, 2014
I've read various "solutions" to my request but it's Greek to me. Simply stated I occasionally have to create worksheets that involve dollars and cents. My question is how can I get Excel to stop dropping the zero if its the last digit to the right of the decimal point? $42.30 becomes $42.3, etc.
I've looked through the preferences/options and can find nothing to rectify this. Any way to do this so that keeping the zero becomes the default for any tables, lists, etc that I create in the future?
View 4 Replies
View Related
Jul 25, 2006
I have columns of geological data in number form which may have about 4 or 5 decimal points. I want to reduce them to 2 decimal points without rounding the numbers up. Is there a simple way to do this?
View 4 Replies
View Related
Feb 14, 2008
I've got a wierd simple problem in Excel 2003. I have a laptop and a desktop machine, and I'm an accountant who uses the fixed decimal feature as a default, with it set to 2 decimal places.
On the desktop machine, if I input "23." into a cell and then hit enter, the value left in the cell is "23.00" However, on the laptop, when I do the same thing, I get "0.23" In essence, it ignores the fact that I entered a decimal point.
If I enter "23.0" in a sheet on the laptop, it puts "23.00" in the cell.
I thought maybe it was some sort of hardware thing, like the KB was messed up, but then I used remote desktop to try to see what would happen if I enter numbers into the other computer using the laptop, and into the laptop using the desktop. The laptop when connected to the desktop performed normally, just like the desktop machine. The desktop, when connected remotely to the laptop behved like the laptop machine. In other words, I believe this test takes Hardware out of the picture.
Which leaves some strange obsure setting in excel someplace tht is causing this behavior, and I can't seem to find it.
Does anyone here know why these two installs treat the data entry so differently? It's driving me nuts.
View 9 Replies
View Related
Feb 18, 2014
This is my formula with concatenation: =K3/K1*100 & "c" & " Each"
This is the result of the values in K3 divided by K1: 6.41666666666667c Each
I would like to limit the decimal places to two: 6.41c Each.
I have tried to format the cell and none of the formatting options have any effect.
If possible I would like to use the rounding function but I do not know how to combine the formula + text + rounding.
View 9 Replies
View Related
Aug 13, 2009
I have a vba macro that takes data from one workbook and pastes it into another workbook. In doing this I have declared a few variables of type single (I only need two decimal precision). However, when I copy the values from the cells on the source workbook and paste them into the target workbook, the numbers end up having 12 decimal places. Ultimately, this extra precision causes my totals to be off by .01 or more after a while. I have tried rounding the number as I pull it off the source workbook into the variable, but that didn't matter. How do I solve this problem? Code for pulling data from source workbook:...
View 2 Replies
View Related
Jun 10, 2007
I need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.
View 2 Replies
View Related
Jun 6, 2014
I have a line chart (multiple series) in which I am trying to display custom tooltips on the data points. The source for these custom tooltips are the Notes columns in the first worksheet. The code (which I've copied from an internet site) is working to some degree but I'm not sure how to modify it to pick up the notes column as the content for the tooltips. Also, the example I took this from only had one line whereas I will have 5 when the chart is complete.
View 6 Replies
View Related
Mar 20, 2008
I have to change a time sheet that was previously in HH:mm to display in decimals, but to the nearest 1/4 hour ( 0.25 (=15 mins), 0.50 (= 30 mins), 0.75 (=45 mins), and 1.00 (1 hour))
This is not a formula question, but a format/display question as the cells have to be typed in by different people who up until now have beeb used to typing in the HH:mm format.
This means;
8:15hrs would become 8.25
8:30hrs would become 8.5
8:45hrs would become 8.75
The reason behind the change is a head office wallah that needs to have time in decimals and not true minutes.
Is there a way to;
prevent user from entering any decimal other than .00; .25;.50;.75
or change formatting to turn red if any other than above is entered.
Alternatively, is there a way of me (the collator for 50 people) being able to take data from their sheets (which I have to do monthly) which could be a formula...
I have tried to get head office to change, but they say that they collate data for 13 other sites and all the others are OK (thats cos all the others receive their data on PAPER and one person tabluates them)...
View 9 Replies
View Related
May 15, 2009
Is it possible to remove the display of the leading zero in decimal numbers of less than one in Excel 2007?
View 3 Replies
View Related
Aug 16, 2012
I'm writing a macro that will automatically change the display in a column of cells.
The input in the cell would be a decimal value, (e.g. 1, 1.25, 1.5, 1.75, 2). As of now, I think the only input options are whole numbers and 1/4, 1/2, 3/4 fractions.
After inputting the decimal value, the cell should update to display the value as the following string format :
Input: 1.25
Displays: 1-1/4"
The purpose being to enable fast data entry while displaying in the desired format.
Here is where I know to begin for the automatic update:
Code:
Sub Worksheet_Change(ByVal Target As Range)
Application.EnableEvents = False
'
'
'Code
'
'
Application.EnableEvents = True
End Sub
View 6 Replies
View Related
Jul 25, 2014
I have data in an Excel spread sheet that contains rainfall amounts that are to 2 decimal places. However, when ever I put the data into a pivot table they display as 1. I have reformatted the data in the base table, and tried to format the pivot table, all to no avail. There must be a way.
View 1 Replies
View Related
Oct 23, 2011
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
View 4 Replies
View Related
Feb 9, 2013
How can I drop the whole number part of a number and leaving only the decimal part of the number. Then multiply the decimal part of the number with a number. Then repeat this in a sequence. The object is to convert Lat and Long decimals to Hr. Min. Sec.
eg. 53.535663 .535663*60=32.13978 .13978*60=8 53 32 8
eg. 113.352640 .352640*60=21.1584 .1584*60=9 113 21 9
eg. 113.306579 .306579*60=18.39474 .39474*60=23 113 18 23
View 1 Replies
View Related
May 12, 2014
I'm trying to create a completion statement on where I will add up the money my client has sent to me and also add up the money I need to pay out in order for them to complete their transaction. The end result I want is I would like to display whether my client has given me to much money and I need to repay them. Or if they haven't given me enough then I need to invoice them. I need excel to display for me after all the figures have been added and subtracted if the end figure is negative then display in D19 (balanced owed to you). If the end figure is positive (Balance required from you) display in D20.
View 12 Replies
View Related
Feb 27, 2014
I need a formula to take a number with several decimal places and round it up to two decimal places to either .33, .66 or, .00 if its above .66.
For example, 4.23423423423423 will be 4.33
4.43453453533434 will be 4.66
4.8353453453 will be 5.00
Lets say the number is in cell A1. What formula would do this?
View 3 Replies
View Related
Jun 3, 2014
I have a macro that runs every 15 minutes and stores data into a table. This table is attached to a chart and auto updates with the new data every 15minutes. The table will house historical data over time, however I only want the chart to reflect the last 96 entries (15min data points over 24hours). So, once i have enough data my table will be A2:A97. When A98 is populated, i want the data in A2 to be removed from the chart only.
Here is a breakdown:
A2:A97 is currently displayed on the chart.
I enter new data into A98.
The chart will now display A3:A98.
I enter new data into A99.
The chart will now display A4:A99.
I enter new data into A100.
The chart will now display A5:A100.
and so on.
How I can accomplish this? Does this need to be done in VBA?
View 3 Replies
View Related
Jan 19, 2009
Column P is the percentage of body weight lost...
P
-1.98%
-2.92%
-3.87%
-3.48%
0.00%
-0.10%
0.00%
-3.56%
-3.57%
What I need is a formula to look at all 9 data points and give the place number. Remember that the lowest number is actually in first place.
View 2 Replies
View Related
Dec 21, 2009
I'm using MultiPage in a UserForm
I have multiple worksheets that can range from: HOLE 1 and go up to HOLE 30
I have other multiple worksheets that can range from: SAFETY 1 and go up to SAFETY 30
When I use the Code below it always goes to the 1st worksheet named either HOLE 1 or SAFETY 1
How can I have it so that when I click on the MultiPage Tab that it goes to the last sheet on the right for each?
Example: If I'm on SAFETY 5 it would go to that sheet, and not SAFETY 1 like it does now.
Here is my
Private Sub MultiPage1_Change()
Select Case MultiPage1.Value
Case 0 'page 1
Workbooks("Workbook.xls").Sheets _
("HOLE 1").Activate
Case 1 'page 2
Workbooks("Workbook.xls").Sheets _
("SAFETY 1").Activate
End Sub
View 11 Replies
View Related
Dec 8, 2008
I have a spreadsheet that I am trying to automatically determine a dollar figure based on the number of points a cell has. A if the first set of a goal, B is their actual goal and C is the actual number of points. I am trying to determine the dollar figure for D. For each point between A and B the person gets .50cents. For every point above B and up to C the person gets 1.50. In the case below if the person doesn't reach B than they would only get the 50 cents from A up to C.
A= 2537, B=3252 C=2820
I have attached my spreadsheet and everything is perfect except on one point. I can't figure out how to tell the spreadsheet if it is a negative number to give me zero.
View 7 Replies
View Related
May 2, 2007
Is there a way of amending the following line of code so that it selects multiple data points in a data series in a chart (e.g points 14,15,16)?
ActiveChart.SeriesCollection(2).Points(14).Select
View 2 Replies
View Related
May 14, 2008
I know the basics of excell, but haven't ever written any formulas or macros (if that's what I need?) that would perform the following opperations. Bare with me, it's a three step process.
1. I need any zero's to the right of the last number (1-9)
to be removed. (I think this can be done with the click of a button, somewhere?)
examples:
a. 173.17300 = 173.173
b. 231.11000 = 231.11
c. 53.00000 = 53.
2. I also need for the decimal to be moved to the right of the last number after the zeroes have been removed from the previous step. (This seems to be the most deficult step, but most important for me.)
examples:
a. 173.173 = 173173
b. 231.11 = 23111
c. 53. = 53
3. I then need to be able to cross reference those remaining numbers with a set of numbers I have.
examples:
Remaining Numbers / My List
a. 173173 / Not on list
b. 23111 / MATCH
c. 53 / Not on list
View 7 Replies
View Related
Sep 20, 2007
i want to do something that should be relatively simple, and yet it is not... has me stumped. what i'm doing: taking a range of numbers... from 1-19, 20-39, and so on, and using a vlookup function to pin a rating for said value off a reference table. heres a example of what i'm doing:
A | B
1 1
2 1
3 1
4 1
5 1
... ...
19 1
20 2
... ...
40 3...................
View 2 Replies
View Related
Jul 23, 2008
I would like to enter whole numbers but have them convert to decimal. I have searched and found a solution, but it only references to one column and I need to reference other columns as well. I tried to edit but I’m not very knowledgeable with code. Here is an example of what I am looking for, columns E31:E52, F31:F52, L31:L52, M31:M52, N31:N52. Could someone provide a code to acquire these results?
View 9 Replies
View Related
Jul 30, 2009
We're trying to use one template to enter data with users being able to start entry from a number of different starting points. this changes they way the look-ups have to work. The attached sample explains it a whole lot better.
View 2 Replies
View Related
