I need to create a formula to calculate monthly hours worked (144.20) by hourly rate (£14.25). So far everything ive tried has given me awrong answer. I cant seem to make the total right. From what ive come up with (Not good) the total accepts the hours-just not the minutes.

Any way to calculate the total hours staff work based on the mininum time of the first transaction to the maximum time of the transactions. I used a DMIN and DMAX function to get those times per employee. The issue is then the time goes over from one day to the next, such as from 11 PM to 4 AM the next day. As you can see in the data below,the fourth record shows the minimum time as 12 AM and the max as 11 PM with total time worked as 23 hours. In this example, the total hours worked should be five hours.

Need a ormula that will calculate various lengths of time within a column.

For example: I would like to be able to add 02:43 (2 minutes 43 seconds) plus 01:10 (1 minute 10 seconds) plus 05:15 (5 minutes and 15 seconds) ..and accurately arrive at the sum of 09:08 (9 minutes 8 seconds)

Currently, whenever I input the value of 02:43- and assign the value of 'TIME'.. it reads it as 14:23 (clock time..not length of time.) I will only be using data that follows the format of mm:ss (minutes:seconds).

I got a problem with a time calculation, if it's even possible.

I want to calculate the amount of hours that have been woork in a slot.

Example: First slot is from 08:00am till 17:00pm, time cost 100% Second slot is from 1700am till 24:00, time cost 110% Third slot is from 24:00 till 08:00 am, time cost 120%

I'm working from 08:00am till next day 01:00am So my hours are: 9 in slot 1, 7 in slot 2, 1 in slot 3.

It's been several years sine I had to look at calculating amount of time worked. Can you please look at this old spreadsheet of mine and verify that the formula is correct?

It appears to be ok to me, but I don't want any errors when it comes to paying my employees

I need a formula to calculate hours worked between specific times. In the worksheet I have, I need to calculate the hours worked between 5am and 10pm, the start time is in C7, and the finish time in D7 the formula need to be in H7, and another formula in I7 to calculate hours worked before 5am and after 10pm .

i have a timesheet that we are trying to use. the problem is the column that says shift diff. if an employee works after 6:30pm for 1and 1/2hr, he is entitled to shift hours. shift hours is between 6m and 8am.

As long as he works after 6.30pm but works for at least one and a half hour, he will get the shift.

if work, 9am to 7:30pm, and have break between 2-3pm, should have 1.5hrs shift and 9.5hrs total if work, 7:45pm-9:45pm, and have break between 8:30-9pm, total hrs work is 1.5 and shift hrs s/b 1.5hrs if work 3pm to 12am and have break between 7-8pm, total hrs work is 8 and shift hrs s/b 5hrs

I am trying to calculate earnings based upon hours worked based on 24 hours format (time out - time in = time worked) multiplied by hourly rate. I cannot get the proper calculation. How can I attach a copy of the Excel worksheet?

I have created a userdefined function. the Idea is for the user to calculate the difference in hours and minutes. The input would be like budtime = 30 , realtime = 1.25 the answer I would like to have is 28:45 (28hours and 45 mins). Im aware that I can format the cell manually with [h]:mm but I'd like the function to do it. I have written this:

Function RT(BudTime, RealTime) RT = Format(((CDec(BudTime) - CDec(RealTime) / 24)), "[h]:mm") End Function

I have call data in date/time 06/07/08 2:00 PM custom format for a 2 month period. I have my regular opening times eg Monday 9-3, Tuesday 10-4. For each call I want to know if it was made during opening times or not.

I've got a time difference from 8:00AM - 12:30PM as 4.30 I'm trying to get the minutes, .30, converted into a 6 minute increment, .5. Is it possible to do this and if so how would it be done? Below is a chart of how the time is converted from 6 minutes increments into decimal form.

I am trying to come up with a formula that calculates total time someone has worked in a day. The scenario is an individual will work at a home and start working with an individual. Their start/end times look like this in a pivot:

Min Start Max Start Min End Max End Location A+Counselor A 8:56 AM4:01 PM 1:11 PM 7:00 PM Location A+Counselor B 12:00 AM 8:00 PM 6:00 AM 11:59 PM Location B:Counselor C 7:00 AM 12:00 PM 2:00 PM 4:00 PM Location C+Counselor D 8:00 AM 8:00 AM 4:00 PM 4:00 PM

Some people work split shifts while others work a straight shift. The formula I created was this:

=IF(OR(B9=C9,E9=D9,D9=C9),E9-B9,IF(D9>C9,((E9-D9)+(C9-B9)),IF(C9>D9,((D9-B9)+E9-C9),"New Formula Needed")))*24

(I use a pivot table to show max min for start and end times)

This works great except for the individuals that have multiple punches during the same time frame. The one scenario I am having trouble solving for is when someone punches in more than once during their shift displaying. This occurs when a counselor starts a shift working with one person but then adds another person mid shift. An example of this could be:

Location A+Counselor E Min Start Max Start Min End Max End Consumer 1 1:00 PM 1:00 PM 8:30 PM 8:30 PM Total Time: 7.5 Consumer 2 12:00 PM 12:00 PM 2:35 PM 2:35 Pm Total Time: 2.6

Pivot says that they worked a total of 10.1 because it is grabbing the max and mins and calculating. The actual total time worked is 8.5 hours in reality.

The raw data comes in like so:

Location Counselor Consumer Start Time End Time A A A 1:00 PM 8:30 PM A A B 12:00 PM 2:35 PM A A C 12:00 PM 5:00 PM

Based on above data if The Column heading is 1 then it needs to go to the below data and multiply by that value and at the end should give me the total for the person. note that the total time is captured in a different sheet.

Label 1 = Time when form initialized or opened Label 2 = Running Time (Live Time) Label 3 = Total Time (Label 2 - Label 1)

Now what I need is since Label 2 is live time which shows the running time, Label 3 displays the total time spent. I want to display total time as running time.

e.g. Label 1 = 13:01:00 Label 2 = 13:05:10 (running time/live time) which will keep ticking Label 3 = 00:04:10 (I want even this as running time which keep running when label 2 is running)

In the example above, E2 calculates the totals between 12/8 and 12/9 giving me 15:00. What I want the formula to exract is the total from Col D the total from 12/9 to the previous 24hrs.

12/8 has 2 entries, and 12/9 has 3 entries. The total I want to extract in 24 hours, NOT 1 day, is 14. What formula can I use that will calculate the totals in 24 hrs.

I am trying to determine the total hours of downtime accumulated when there are 2 or more machines down during the same time period. To do this, I need to be able to determine if at any point there are 2 or more pieces of equipment down at the same time, and if this is true, how many hours were overlapped. The attached spreadsheet shows how the data is presented.

I am attempting to create a time chart that keep track how long a particular person works on an individual project to finally calculate profit & loss. Attached is the spreadsheet.

I am using invoice #'s to differentiate the jobs but have no clue how to make it calculate how much time was spent per job, per person then calculate the total cost per job per person?

sheets.time chart.xlsx

2014 tab- grey column is installer and white is shop employees profit loss tab- all calculations done here payroll tab- all cost data here

I have a simple VBS script that puts the username & current time in columns. When the user saves that time is also placed into a column.

I would like to be able to calculate the amount of time a user has spent on the spreadsheet for the current month & if possible the total time all users have spent on the spreadsheet this months.

I need to be able to add up times worked for 12 months of the year. For example if one workd 49 hours and 23 minutes the month of Jan and the same for Feb, how do I do this and keep a running sum of them? I can't see to figure out how to format it so that it does not change to time of day since it will be over 24 hours.

I need a formula to multiply only the decimal number in a cell and not the integer. For example: the number in the cell is 57.3615. I want to multiply .3615 only.

Refer to the attached sheet which is Daily Schedule for employee. I need a formula to add hours worked on single day in cell C2 for Monday, E2 for Tuesday, G2 for Wednesday, and so on.

Every day we have Clockin_Clockout info for each employee as shown for employee a & b.

FYI : I am using below formula to add employee hours for the week as (formula in cell R4).

This is probably a very simple problem that has me going around in circles. I am attempting to set up a time roster, where I simply want to check:

If "end-time" minus "start-time" is greater than 4:00 (hrs), then deduct 00:30 (minutes) and place that result in another cell.

If it is not greater than 4:00 (hrs) then leave unchanged. I have read thru countless examples on the Forum - but I think that such great learning is driving me mad. Although I do believe that I have the correct format [h].mm - but attempts with IF's have got me confused. This is one of those "Looking down the tunnel towards the flickering light" moments.

I'm trying to figure out what is wrong with this formula. =(SUMIF(Q14:Q4995, "<="&EOMONTH(TODAY(),0),W14:W4995))-(SUMIF(Q14:Q4995, "<="&EOMONTH(TODAY(),-1)+1,W14:W4995)). I've got a cell that adds Total hours worked which pulls from the same column of entered data as the formula above and that cell works. My hours for the month however just shows up as zero. If I try and edit the formula or even just highlight it to copy it and then tab out of the cell this shows up...

1/0/00

If I undo the highlight and tab it will go back to showing zero. I've checked my dates that I entered and they are correct. I'm at a loss as to how to fix this formula.

I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!

For example Start time: 21:00 Finish time: 06:30 Hours worked: 9.50