This error message in line vpp:
Invalid procedure call or argument
Code:
Function fn1(ByVal a, ByVal i, ByVal e, ByVal N, ByVal w, ByVal ta)
Pi = Application.WorksheetFunction.Pi
mhu = 398600
vpp = (mhu / Math.Sqr(mhu * a * (1 - e ^ 2))) * (-Math.Sin(ta * Pi / 180))
fn1 = 2 * vpp
End Function
When I step-through my code below, it always opens the first file in the directory "C:Pyramid Files", but when it comes back to the Pyramid Files sub after fully processing the first file via various other subs, the VB Editor apparently doesn't like something about this line: StrFile = Dir(), since it quits after "snapping-back" to the previous sub Initialize(). I have also tried StrFile = Dir, but that doesn't work either. I did Dim Strfile in the General Declarations. When I set Watches for Dir and Dir(), I get the value "Invalid procedure call or argument" for both, as if the directory function lost the value. I can't determine why this is happening.
VB:
Dim WSM As Worksheet, WSB As Worksheet, WS1 As Worksheet, [U]StrFile As String[/U], StrDirectory As String, ClientCode As String
Dim Filename As String, LastRowb As Long, LastColB As Integer, LastRow1 As Integer, NextRowC As Integer, x As Integer, y As Integer
[Code] .......
This error occured me, and i clicked "Debug" to see where was the error and i found a strange thing that i don't know how to solve it:
The line has the following
I have some VBA that appears to work perfectly on the first run, but I get the following error if I run it again or any alternate runs;
Title: Error (App_WorkbookBeforeClose)
Number: 5
Message: Invalid procedure call or argument
The only way my code currently works is if Excel has just been launched. The VBA creates, saves and modify's files so I imagine it has something to do with the ThisWorkbook object when a file is being saved or closed. I have googled the error but didn't really get anywhere as it is pretty generic and seems to be returned for a number of Excel products.
Code:
Dim LR As Long Dim Dash As Long, _
Whole As Double
Dim pi ', WorkSheets, Range
WorkSheets("Sheet3").Select
LR = Sheets("Sheet3").Cells(Rows.Count, "A").End(xlUp).Row
[Code] .........
I am using a procedure to loop through all files in a folder and am encountering an
Invalid procedure call or argument, error on the ChDrive line:
mypath = "\Eo1
_iSurveysNALCReturns"
ChDrive mypath
Is it something to do with the mypath syntax? Recently our drives have been reorganised. I used to just use "G:Surveys..." which always worked. Does anyone have any thoughts? I hope I've explained properly - you can probably tell I don't know much about this sort of thing.
I would like to apply different conditional formatting at different times with a click of a button. I setup a dummy and turned on the recorder and recorded this
Range("A7:N7").Select
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=$C7=1"
Selection.FormatConditions(1).Interior.ColorIndex = 37
Range("A1").Select
End Sub
I tried changing to this
'/Conditional Format - OTHER EXPENSE B/L
Set rngConditional = wsData.UsedRange
With rngConditional...............
I am getting an invalid procedure call when the portion of the code that has the ASC function runs. The only change I made to the workbook was to increase the available rows that this macro is totaling from 150 to 300. If I don't increase the rows I do not get the error.
What this code is doing is grouping information from 20 different sheets and totaling them and placing the total in the correct group. Most of the totals will begin with a number, however there will be a small amount that will begin with a letter. The items with letters need to be grouped in the 17000 category.
Dim c As Range
Dim rng As Range
Set rng = Range(Cells(3, "R"), Cells(lastrow, "R"))
For Each c In rng
If c < 20 Then c.Offset(0, 1) = "01000"
If (c > 19) * (c < 26) Then c.Offset(0, 1) = "02000"
If (c > 25) * (c < 161) Then c.Offset(0, 1) = "02600"
If c > 159 Then c.Offset(0, 1) = WorksheetFunction.Text(c, "000") & "00"
If Asc(Left(c, 1)) > 58 Then c.Offset(0, 1) = "17000"
If c > 170 Then c.Offset(0, 1) = "18000"
Next c
I create and load a commandbar, prior to loading it I attempt to check if it exists, then delete it, and recreate.
I dont understand why this seemed to work for months and now creates an error.
It appears that every now and then the created commandbar is not created when I open a file. Thats when the error pops up. I can manually run the Create_Bar sub and it will be fine, for a while.
Run-time error '5':
Invalid procedure call or argument
This section is in my personal.xls file in "ThisWorkBook" of personal.xls.
I have found some code that does what I want- but i do not understand how to use - call it. The programmer says ...
GetNetworkIPAddress()
' can be called from a worksheet cell using the formula:
' =GetNetworkIPAddress()
I have put this in a cell but i ger an error #Name?
what should i do ?
I recorded a function and got the message box "Invalid Outside Procedure" when I tried to run the macro. I don't understand what it means or how to prevent it.
View 2 Replies View RelatedI have got a UserForm which pulls data from Excel sheet and show it on UserForm.
UserForm1 has One ListBox name "ListBox1" and Thirteen TextBox's.
TextBoxBatch...... Showing Batch number
TextBox1 ........... Showing Year 1 data
TextBox2.............Showing Year 2 data
TextBox3...............Showing Year 3 data
.
.
.
.
TextBox12...........Showing Year 12 data
It shows data correctly in UserForm1 for TextBoxBatch and TextBox1 to TextBox9 but when it reaches TextBox10 it give error "Could not get Column property, Invalid argument"
And it does not show data in TextBox10 (Year 10), TextBox11 (Year 11), and TextBox12 (Year 12).
I have attached workbook and userform.
Book1.xlsm‎
I want to be able to call a procedure and pas 2 variables that it will need to it.
The code looks like this:
Private Sub UpdateScreen(StartLine As Byte, EndLine As Byte)
End Sub
UpdateScreen(104 , 140)
For some odd reason I get an "Expected: = "error when I enter the last line. I works if I send only one variable, but not when I send 2.
I've written an Excel (using 2007, compatibility mode to 2003) app for our stock control. Basically it's a protected stock sheet which the user adds/removes stock via a form.
When the user runs the form the following code loops through the stock list header adding item names to a combo box. Problem is I get a run-time error if there's more than 60+ items but while the error always occurs, it happens at different places in additems.
Run-time error '-2147024809 (80070057)
Invalid argument.
In the code I've allowed a loop to 1000 items but in reality they'll be no more than 150.
I am calling a procedure from a commandbar button using on action.
With oButton
.Caption = "&Progress Report"
.OnAction = 'this bit please
.BeginGroup = True
.FaceId = 576
End With
Private Sub ProcessingRequest(ByVal shtRequest As String)
End Sub
Compile Error: Invalid Outsid Procedure
I have Compile error coming up when I try to run Sub DeleteRecord on Sheet 2. It brings me to the VBE with sheet 1 code brought up and the Compile Error showing, with the xlup portion of the code highlighted. I okay the error and it highlights the Sub DeleteRecord on Sheet 2 with a yellow arrow.
Sheet 1 code as follows:
Dim y As Long
y = Range("A65536").End(xlUp).Row
Range("A1").AutoFill Destination:=Range("A1:A" & y), Type:=xlFillDefault
Range("J1").AutoFill Destination:=Range("J1:J" & y), Type:=xlFillDefault
Range("K1").AutoFill Destination:=Range("K1:K" & y), Type:=xlFillDefault
Range("L1").AutoFill Destination:=Range("L1:L" & y), Type:=xlFillDefault
Range("M1").AutoFill Destination:=Range("M1:M" & y), Type:=xlFillDefault
Range("N1").AutoFill Destination:=Range("N1:N" & y), Type:=xlFillDefault
Range("O1").AutoFill Destination:=Range("O1:O" & y), Type:=xlFillDefault
Range("P1").AutoFill Destination:=Range("P1:P" & y), Type:=xlFillDefault
Sheet 2 code at follows:
Sub DeleteRecord()
'
' DeleteRecord Macro
'
'
Application.ScreenUpdating = False
ActiveSheet.Unprotect
ActiveCell.Offset(4, 3).Range("A1:H2").Select
[code]....
I'm adding a new macro and getting the error message Compile Error:Invalid outside procedure. I'm using the following code
Dim wSheet As Worksheet
Dim vFound
On Error Resume Next
For Each wSheet In ActiveWorkbook.Worksheets
With wSheet
Set Tble_Array = .Range(Tble_Array.Address)
vFound = WorksheetFunction.VLookup _
(Look_Value, Tble_Array, _
Col_num, Range_look)
End With
If Not IsEmpty(vFound) Then Exit For
Next wSheet
Set Tble_Array = Nothing
VLOOKAllSheets = vFound
End Function
i want to create a lot of buttons, one in each line, that, when you click on them, open a file. The filename is in a cell in the same row as the button.
Of course every button should open a different file, and that is the problem. As far as i know (not very much) the buttons can only call other subs, and not with an argument.
What should i put into the "onAction" property of each button, so that each button opens a different file? I really dont want to create hundreds of subs just to get this done, there must be another way.
PS: By the way, how can i delete all but one buttons of a sheet with a vba script? Or shall I open another post for that?
I'm making changes to row A, but am getting an invalid outside procedure, not sure why. Don't even know what it means. It's not even in the same worksheet....
View 9 Replies View RelatedI have a userform in an add-in (which is loaded), when I try and call it from an excel sheet, I get the following error "Variable not defined"
Private Sub CommandButton3_Click()
UserForm1.Show
End Sub
The code in the userform is all private subs.
Similarly when calling a public sub from the add-in such as;
Private Sub CommandButton3_Click()
Call SillySub
End Sub
I get the error "Sub or Function not defined".
How should I be doing this?
how do you call another sub's function from another sub? For example:
Sub Worksheet_SelectionChange(ByVal Target As Range)
StartingDate:
Static STempHolding As String
If STempHolding <> "" Then OldStartingDate = STempHolding
STempHolding = Target.Value
EndingDate:
Static ETempHolding As String
If ETempHolding <> "" Then OldEndingDate = ETempHolding
ETempHolding = Target.Value
End Sub
If i just wanted to call the StartingDate function, from my Worksheet_Change sub how would i do that?
I keep getting this error:
"Compile Error: Invalid outside procedure"
What I am doing is having a macro execute every time my Pivot table is refreshed, the macro invokes a format change.
I need to call a Stored Procedure in a SQL Server from VB, but do not have the minimun Idea about doing it....Could you help me ?...I made a lot of attemps copiying code from other treads and scratch it, but so far results = none.
Server name: VAIO/SERVIDOR
DataBase: CEDRO
I´m using Excel XP.
In my VBA Project I try to call procedure from another VBA Project, but I get syntax error. The code is like: call Automation.xls!convert_numb
View 2 Replies View RelatedI have 46 drop downs that I need to call from a main sub. I want to create one loop that will call each one to perform its function. Below is a simple example of what I am trying to do, but where I need help is with the 'Call Y' line. I am not sure what character to use to tell excel to look at what is in the value of Y, not 'Y' itself
Sub testitout()
Dim y As String
For X = 1 To 2
Sheets(" Lookup"). Range("E3").Value = X + 4
y = "dropdown" & X & "_change()" 'this will return "dropdown1_change()" for the first loop
Call y 'i want to call dropdown1_change() below
Next
Is it possible to call a Forms Command Button procedure from a Module?
View 3 Replies View RelatedHave a spreadsheet for creating employee schedules (any number of employees, 3 rows per employee, 5 columns for each day). I want to move all employees' info for one day (5 columns and XX rows) to another area and then clear the employees' data for that day. I have the code working for Monday but I don't want to duplicate it 6 more times for Tue -Sun. I have set up named ranges (i.e. MonFT, TueFT, etc.
I would like to call one subprocedure to do this and pass parameters for each day so the ranges can be changed to reflect the desired day?
I am doing this for holidays; i.e. if there is a Wed. holiday, store all of Wednesday's data and clear Wed. Then restore all Wed data when preparing the schedule for the following week.
I have a worksheet with a Drop Down list (Set up with Data Validation).
All I want to do is a call a procedure when a particular option is selected from the list, without have to run the macro manually.
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
how to create a function argument containing my own defined formula?
View 9 Replies View Related
