Event Procedure
Dec 11, 2007
I've created a macro with a custom dialog box, but I don't know how to make the transition from when I make the dialog box pop up, the user enters the information, then they click "Continue" or "Cancel" or whatever it may be, how to do I make it happen from there out?
Do I make the command buttons a boolean and if they click it's true? How do I make it work?
View 14 Replies
ADVERTISEMENT
Nov 15, 2006
I'm trying to add a worksheet event via code. It works OK when I run it on its own but I get a run-time error 9 subscript out of range error when I try to run it from another procedure.
Please find attached my 2 bits of code. Any help greatly appreciated.
This is the bit that works OK on its own but not when called from my other procedure
Sub Code_To_Write_Code()
'This writes code to the new sheet
Dim StartLine As Long
Dim SheetToAddCodeTo
SheetToAddCodeTo = ActiveSheet.CodeName
With ActiveWorkbook.VBProject.VBComponents(SheetToAddCodeTo).CodeModule
StartLine = .CreateEventProc("Calculate", "Worksheet") + 1 ..............
View 9 Replies
View Related
Apr 27, 2006
I have a userform with about 20 textboxes. I would like to use the same "data validation" procedure on each textbox as the user enters data into the form. I'll use the exit event to trigger the validation. As the user moves from one textbox to the next, the data will be validated; if it's out of range, the user will be prompted to correct it.
Is there a way to have a common event procedure so I don't have to have a separate procedure for each textbox individually? I know I can put the actual validation code in its own procedure and then call it from each event procedure but that would still leave me with 20 event procedures like:
Private Sub Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ValidateData
End Sub
View 7 Replies
View Related
Apr 2, 2008
I have a calendar userform set as Userform1 and I would like it to pop up upon double clicking in two different ranges 'date' which is on sheet 1 and 'dates' which is on sheet 4.
So far I have this code in Thisworkbook, which works perfectly for Sheet 1, but I get the following error on Sheet 4: Run time error '1004': Methed 'intersect of object'_global' failed.
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
If Intersect(Target, Sheet1.Range("date")) Is Nothing Then Exit Sub
UserForm1.Show
Exit Sub
If Intersect(taregt, Sheet4.Range("date2")) Is Nothing Then Exit Sub
UserForm1.Show .............................
View 9 Replies
View Related
Jun 18, 2014
Why this code DOES NOT work:
[Code].....
But this one DOES
[Code] .....
Why would a click event execute but the same code doesnt fire on a initialize event?
View 3 Replies
View Related
Jan 22, 2014
Excel 2010
I am trying to set public variables from an event handling procedure based in a worksheet so I can use that variable in a userform. Nothing I have tried works no matter where I declare the variable. I am using a msgbox to display the variable (a range) but it shows as blank regardless of whether I place the variable in a module, this workbook object or in the sheet object where the event code is placed.
I am sure there is a simple way to transfer variables from the sheet's code (where it must remain as the variable depends on the target cell's position that triggers the event).
View 2 Replies
View Related
Mar 4, 2014
Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?
It might be clearer to explain by a dummy code example:
[Code] ......
I'm seeking what I would need to replace Line1 with.
View 11 Replies
View Related
Mar 27, 2009
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies
View Related
Aug 7, 2006
I have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
View 9 Replies
View Related
Aug 5, 2014
Looking for the syntax that will allow me to code an event sub routine, based off the event of a specific function e.g. findnum being run.
View 14 Replies
View Related
Apr 21, 2009
I have the following codes used with a user form, but they are all not working due to an outside procedure problem,
View 14 Replies
View Related
Sep 6, 2007
I need in column E the value "complete" but only against the last row of each system from column B, if column D ="draft del" and is not null. For example system V0523 is draft del and so is complete, therefore I would like "complete" in column E row 10.
******** ******************** ************************************************************************>Microsoft Excel - CA_ TDM_ ACQD_TBLDATAMODULE(LEFT JOIN)_all_systems.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutB2B3B4B5B6B7B8B9B10B11B12B13B14B15B16B17=
ABCDE1EIACODXA*LSACONXBDM_MGT_STATUSDM_QA_STATUS12EH101-VH71V00V00**3EH101-VH71V00V00**4EH101-VH71V00V00**5EH101-VH71V01V01WIP*6EH101-VH71V01V01WIP*7EH101-VH71V01V01WIP*8EH101-VH71V0523V0523001DRAFT*DEL*9EH101-VH71V0523V0523001DRAFT*DEL*10EH101-VH71V0523V0523001DRAFT*DEL*11EH101-VH71V0552V0552001**12EH101-VH71V0552V0552003**13EH101-VH71V0552V0552005**14EH101-VH71V0552V0552007**15EH101-VH71V0552V0552009**16EH101-VH71V0552V0552011**17EH101-VH71V0552V0552013**CA, TDM, ACQD_TBLDATAMODULE(LEF*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View 9 Replies
View Related
Sep 2, 2009
I have the following macros,but want them to run in sequence but i don't know how.
I plus won't another macro to save the archive as .txt
1. I use the following macro to open .txts so the cells go where i want to
Sub NewTextImport()
myfile = Application. GetOpenFilename("Text Files,*.txt")
Workbooks.OpenText Filename:=myfile _
, Origin:=1253, StartRow:=1, DataType:=xlFixedWidth, FieldInfo:= Array( _
Array(0, 2), Array(17, 2), Array(34, 2), Array(56, 2), Array(102, 1)), _
TrailingMinusNumbers:=True
Columns("A:A").EntireColumn.AutoFit
Columns("B:B").EntireColumn.AutoFit
Columns("C:C").EntireColumn.AutoFit
Columns("D:D").EntireColumn.AutoFit
End Sub
2.Remove the unwanted zeros from Column E.............
View 2 Replies
View Related
Jun 19, 2007
I have written a macro in Excel VBA. The code is divided into modules and each module is having various procedures. I'm trying to run a procedure written in modules2 from module1. I'm getting an error message "Expected Variable or Procedure, not module".
View 2 Replies
View Related
Nov 27, 2007
I have a userform in an add-in (which is loaded), when I try and call it from an excel sheet, I get the following error "Variable not defined"
Private Sub CommandButton3_Click()
UserForm1.Show
End Sub
The code in the userform is all private subs.
Similarly when calling a public sub from the add-in such as;
Private Sub CommandButton3_Click()
Call SillySub
End Sub
I get the error "Sub or Function not defined".
How should I be doing this?
View 3 Replies
View Related
Jun 19, 2008
how do you call another sub's function from another sub? For example:
Sub Worksheet_SelectionChange(ByVal Target As Range)
StartingDate:
Static STempHolding As String
If STempHolding <> "" Then OldStartingDate = STempHolding
STempHolding = Target.Value
EndingDate:
Static ETempHolding As String
If ETempHolding <> "" Then OldEndingDate = ETempHolding
ETempHolding = Target.Value
End Sub
If i just wanted to call the StartingDate function, from my Worksheet_Change sub how would i do that?
View 5 Replies
View Related
Jul 9, 2012
The code below is fired from a Worksheet Change Event on cell c18. The cell has a userform calendar control to select Date of Birth. What I want the code to do is check the age at the current date and if it is below 16 or over 25, then show the appropriate message. I cannot use data validation to not allow values outside this age range because there will be instances where a person's details can be added if their age is under 16 or over 25. I just need to alert the inputter in case they are unaware or have inputted incorrectly.
When the message box pops up, if they click Yes then the code should take them to the next cell for inputting. If they click No then it should stay in cell C18 and hopefully pop the calendar back up (I've not tested this bit yet).
The code as it stands brings up the "This person is under 16 years...." message no matter what date of birth is input.
VB:
Sub AgeValidation()
Dim age As Integer
Dim dob As Range
Dim AgeMsgAnswer16 As String
Dim AgeMsgAnswer25 As String
Set dob = Worksheets("Monitoring Form").Range("c18")
[Code] ....
View 3 Replies
View Related
Feb 28, 2006
When i open the MS-excell and i go to see the VBeditor i can see the following in the project window:
- spacereport(space.xla)
-microsoft excel objects
sheet1
[Code].....
All the code in spacereport project, let me go to File-->Space and then run a report previously added. what i would like to do is, being in the book3 project, execute modules and forms from spacereport project.
View 6 Replies
View Related
Apr 26, 2014
I have 2 workbooks open. In the workbook that I am working in I run a macro from a userform to copy a worksheet from the other workbook that is idle in the back ground. I also display another user form that says "please wait" while the macro is running.
The problem I have is even though screen updating is set to false the screen switches over to the other workbook while it is copying the desired sheet and switches back to the workbook I am copying to after the macro completes. Also the "Please Wait" userform disappears while the other workbook is displayed and reappears when the initial workbook returns.
Below is my code which works without issue but perhaps there's a better way to copy between workbooks that would prevent the screen changes?
[Code] ........
View 3 Replies
View Related
Oct 15, 2008
I am using following event macro and it repeats itself more than 300 times. I am at a stage where I am getting a message "Compile Error, Procedure too large", I tried to break it into two but that's not working.
Option Explicit
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Range)
Dim cl As Range
Dim lng As Long
Application.EnableEvents = False
Select Case Target.Address
Case "$E$3"
If Target.Value = "Yes" Then
SelectNumber:
lng = Application.InputBox("Please enter number 0 to 100", , , , , , , 1)
If IsNumeric(lng) = False Or lng < 0 Or lng > 100 Then GoTo SelectNumber
Range("G3") = lng
Else: Range("G3") = 0
.................................................(above statements repeat more than 300 times for different cells)..............................
Application.EnableEvents = True
End Sub
View 15 Replies
View Related
Apr 17, 2009
If you run it type in 3.5. What gets returned from the procedure is the number 4 NOT 3.5. I think its related to the data type declaration but i thought a data type of long would include the number 3.5.
View 5 Replies
View Related
Feb 2, 2010
I need to extract the filename “My Excel File” from Worksheets(“Sheet1”).Range(“A1”), whose value = C:Documents and Settingsuser1DesktopMy Excel File
I found on Chip Pearson’s site a Function TrimToChar which, using SearchFromRight and a TrimChar of “” will trim OFF the filename “My Excel File”, leaving the Path.
But, I think I could use his function to tell me the number of characters in the Path and then use that to extract the remaining characters from the total character length (Mid Function)
Problem is, I don’t have a clue how to call a Function in VBA to work on Worksheets(“Sheet1”).Range(“A1”). How do you set the InputText , TrimChar, & SearchFromRight?????
(eventually, this will be in a loop, where I extract the filename from a Dynamic Named Range (list) in Column A)
View 3 Replies
View Related
Mar 2, 2012
I have found some code that does what I want- but i do not understand how to use - call it. The programmer says ...
GetNetworkIPAddress()
' can be called from a worksheet cell using the formula:
' =GetNetworkIPAddress()
I have put this in a cell but i ger an error #Name?
what should i do ?
View 9 Replies
View Related
Jun 27, 2012
I have a worksheet with 15 procedures running after each other and repeated about 50 times. How can I display to the user which procedure is running at the moment. I'm using a form with a label on at the moment, but it doesn't update after the first display.
View 1 Replies
View Related
Aug 26, 2012
I'm working on a management program for a small company. As one of it's feature i need a procedure which send a prewritten SMS to it's employees using a web service like fullonsms.com (10 employees at a time.).
View 9 Replies
View Related
May 6, 2014
I have a VBA procedure in Excel that opens PowerPoint presentations and searches each slide for embedded objects, opens, and attempts to save the objects as separate files utilizing the following statement:
Shape.OLEFormat.DoVerb Count
Where Count is the "Open" verb. 90% of the time it works great but there are times where the object simply wont open so the application just stops. I don't get any errors so I don't see how I can trap for this incident.
What I would like to do is emulate something similar to C#'s Try/Catch function.
Is there a way to do something like this in VBA?
View 7 Replies
View Related
Jan 27, 2008
I am getting an invalid procedure call when the portion of the code that has the ASC function runs. The only change I made to the workbook was to increase the available rows that this macro is totaling from 150 to 300. If I don't increase the rows I do not get the error.
What this code is doing is grouping information from 20 different sheets and totaling them and placing the total in the correct group. Most of the totals will begin with a number, however there will be a small amount that will begin with a letter. The items with letters need to be grouped in the 17000 category.
Dim c As Range
Dim rng As Range
Set rng = Range(Cells(3, "R"), Cells(lastrow, "R"))
For Each c In rng
If c < 20 Then c.Offset(0, 1) = "01000"
If (c > 19) * (c < 26) Then c.Offset(0, 1) = "02000"
If (c > 25) * (c < 161) Then c.Offset(0, 1) = "02600"
If c > 159 Then c.Offset(0, 1) = WorksheetFunction.Text(c, "000") & "00"
If Asc(Left(c, 1)) > 58 Then c.Offset(0, 1) = "17000"
If c > 170 Then c.Offset(0, 1) = "18000"
Next c
View 9 Replies
View Related
Jun 30, 2008
If Sub A is calling Sub B which is calling Sub C, then how to exit the entire procedure from Sub C, if one needs to?
Placing Exit Sub in Sub C would exit the sub and returns control to Sub B, and the execution of procedure continues!
View 9 Replies
View Related
Feb 12, 2009
I need to call a Stored Procedure in a SQL Server from VB, but do not have the minimun Idea about doing it....Could you help me ?...I made a lot of attemps copiying code from other treads and scratch it, but so far results = none.
Server name: VAIO/SERVIDOR
DataBase: CEDRO
I´m using Excel XP.
View 9 Replies
View Related
Feb 13, 2009
In trying to set up a structure for a bigger and better worksheet, I've come up against a problem that doesn't make sense to me: When the Worksheet is activated, the startTimer sub is in fact run with the OnTime application. But I keep getting the error message "Macro MakeNote not found," when that macro is in fact right there.
The code is very simple:
Sub Worksheet_Activate()
startTimer
End Sub
Sub startTimer()
Application.OnTime Now + TimeValue("00:00:01"), "MakeNote"
End Sub
Sub MakeNote()
ActiveSheet.Cells(6, 5).Value = "YES"
End Sub
Sub TimerExpired()
checkNewBar
End Sub
Sub checkNewBar()
ActiveSheet.Cells(4, 1).Value = "123"
End Sub
A second question: witll the TimerExpired macro run all by itself when the Timer expires, or do I need to do something special ?
View 9 Replies
View Related