I am using the Concatenate() function to join strings from A1 and B1.
The result goes into C1.
How do I remove all the punctuation too?
In other words, I want to keep ONLY the upper and lower case alphanumeric characters....
I have alphanumeric characters and I have to rank them. Previously these characters were only digits (Using Rank function) and now some alphabets mixed with them. What is the function to rank Alphanumeric characters? They are like:
1A2240E01
210003004U
216000001U
499630001
463630001
400650001
I need a macro to delete only the alphabets which are entered along with numbers. Ex: 300ML. BY running a macro i need to delete only the "ML" and the number 300 should remain the same.
Range is For Rows: Entire rows
For columns: F TO P
The cell values betwwen these ranges contains alphanumeric such as 20KG,300ML,200M ...etc
Hence i need a macro to delete the alpha charecters for the particular range.
Is there a way of extracting all non alphanumeric characters from a single collumn?
After extraction, I just want strings with A to Z letters, 0 to 9 numbers, spaces and hiffens(-). All in lower case.
I am trying to remove all characters that aren't letters or numbers from a string. Is there any way to differentiate between a non-alphanumeric characters and alphanumeric characters? I'm thinking of something like "ISTEXT()" that I could use on one character at a time. Or are there any wildcards I could use in the Replace function?
View 9 Replies View RelatedI am trying to remove all characters that aren't letters or numbers from a string. Is there any way to differentiate between a non-alphanumeric characters and alphanumeric characters? I'm thinking of something like "ISTEXT()" that I could use on one character at a time. Or are there any wildcards I could use in the Replace function?
View 9 Replies View RelatedI have a large column of text with multiple entries similar to this: PC3L-10600R-9-11-A0. I need to replace the "11" with a 13. However I have other instances where the 11 appears (PC3-12800E-11-11-D0 or PC3L-12800R-11-11-A0).
I have found that I can use SUBSTITUTION
{=SUBSTITUTE(A50,H50,I50,1) and =SUBSTITUTE(A61,H61,I61,2)}
to handle the specific instances but I'd like to have a way to combine this type of function logically in one command.
I have the following in Column A
28VNC
JR2KL
29C9O
PQS11
I'd like have this result
28
2
299
11
How would I achieve this.
I'm trying to sort by a column with one to four digit numbers, any of which may be followed by a single letter, i.e. 1,2,3 4A,5, 10,11A,75,101A,600,705,1010B,1011A.
I'd like them to sort in the above order. I am only able to have excel 2003 sort all of the numeric cells first, followed by the cells with the alpha character.
Having trouble with this one. Searches seem to bring up every other variation of extracting info from strings except this.
I have cells which contain alphanumeric strings as below and, using a formula, I want to extract everything from and including the last letter to give A 2-3, B 3 and C 3-4 in the examples below.
Sub-base A 2-3
Sub-base B 3
Paving C 3-4
I need to automatically populate a column with an alphanumeric MFR0001 to MFR9999 and am currently using the formula below to add 1 to the start point (A1)...
A1=MFR0001
Formula in A2 =LEFT(C1,3)&(RIGHT(C1,4)+1)
This works perfectly if I start at MFR1000, but breaks and drops the 000 if I use it on the number I need to start with (MFR0001).
Is there an Excel formula to remove the spacebar + characters in red, as shown below? I need to be left with only the last name, first name and the semicolon.
Mouse, Mickey ;
Microsoft Outlook has changed the way that email addresses from the global addressbook copy and paste (from version 2003 to version 2010).
I'm trying to use conditional formatting to highlight cells in a column that have less than 8 characters.
I know the LAN function, but I don't know how to make it work for the conditional formatting.
I would like to add the alpha numeric code "UK" at the beginning of the code listed in the excel file.
How to add this syntax with the listed code in excel file?
It looks for a numeric value then increments it of +1 based on the value found.
How would I modify this for it to look for an alphanumeric value first (EX.: 0A) then increment it alphabetically (Ex.: if 0A then the result would be 0B) and if the value searched is not alphanumeric it would then revert to the initial bit of code that searches for the numeric value?
Dim FndRw As Long, c As Range, LstRw As Long
Set c = Cells.Find(What:="No.", After:=Cells(1, 1), SearchOrder:=xlByRows, SearchDirection:=xlPrevious)
If Not c Is Nothing Then
FndRw = c.Row
If Len(Cells(FndRw + 1, "B")) Then
[Code] ........
I create inventory cards and each needs a unique 4 character sequence number. Currently I have it set up with 4 cards per sheet. If I need to print more than 4 cards, the worksheet will print one sheet of 4, reset itself and increment the sequence number by 4 and continue this cycle until I've printed the number I need.
Currently I have it only using numbers. I start at 1000 and it increments, by 4, up to 9995. Once it reaches 9995 or higher, the increment resets to 1000 and starts over. The problem I am facing is I am now starting to get several cards that have the same "unique" sequence number. What I would like to do is change it from numerical sequencing to alphanumeric sequencing.
This is the code I currently use for the incrementing....
I have a few columns of letters (ranging from A to Z) - onyl one letter per cell. I need to be able to deduct them such that they result in a numeric difference (ie D-B=2, D-A=3). Is there any way this can be done in VBA? (The actual columns are in a word table, so would be great if there was a VBA way to do this, not an excel function).
View 6 Replies View RelatedI would like to have a drop down list for cells in a row - say B1:I1.
Firstly, having the list (with only 2 selections) in these cells to place either an "A" or a "0" (zero) in a cell.
Next, if an "A" is added then a selection of a "B" or a "0".
If a "B" is added then a selection of a "C" or a "0". etc etc
If the "0" (zero) is selected and placed in the row then no more alpha but just the next number "2" available to select only then a "3" etc etc.
These would be added from left to right ie: A to H or 1 to 8.
I might be able to do this with a long formula but problem is there are 100's of rows. Maybe VBA would be more efficient?
(1) In an excel i am about to create 1000 rows of records. The first 100 i set the column to display" Job Role 001 - Job Role 100. The formula i applied from row 2 onwards is: ="Job Role " & TEXT(ROW()-1,"000")
(2) Then now i need to repeat this Job Role 001 - Job Role 100 for the next 100 rows. But if i copy these Job Role 001 - Job Role 100 to the next 100 rows it will result in: Job Role 101 - Job Role 200.
Any solution to make it repeat exactly Job Role 001 - Job Role 100 for next 100 rows onwards??
I'm trying to create a single column of stock bin codes for eventual conversion to barcodes. The bin codes run like this:
A1A
A1B
A1C - etc. to A1H, then the sequence starts again with:
A2A
A2B
A2C etc. up to A6H, when the 1st character changes to B and the sequence starts again
This needs to continue until the sequence reaches Z6H
How to do this without having to enter each code manually?
I want to create a 4 character alphanumeric sequence. The sequence is to be like this: a1a1-z10z10. If it's a number, increment 1 until you reach 10, then move to the next column, if it's a letter, increment a until z, then move to the next column. Excel's autofill feature doesn't seem to work well for me due to the letters involved, so if someone has a macro handy that would be great.
View 11 Replies View RelatedI have about 200 cells with 2 different format in text and numbers but they all have a number in between right after /vgh/.
Is there a formula I can use that will return only thee set of numbers removing the text before and after it.
Below are the 2 different examples.
Example 1 : h4ffkwd1-5o/vgh/2447044/eml-anet_wlcm-h-visit/?hs=false&tok=3GMdjcBsfbfBk1
Example 2 : h38ahlur-19/vgh/163311/?hs=false&tok=1CIRLlqwLSB5g1
I have these sort of text and just need the middle set of numbers.
I am trying to sort alpha numeric data like so -
PA1
PA2
PB1
PB2
PB10
When I sort, the alphabet part is sorted right, but the number part is is not what I want -
PB10 is right below PB1-
PB1
PB10
PB2....
Ok, before any one shoots me down, i have looked around the forum and the internet for a answer, Im im half way there.
I have a column in my worksheet which contains alphanumeric data, I also have a Custom menu option to sort the worksheet but 3 columns.
No i know if i have a column contains the following ....
I'm looking to return in cell BG2, the highest alphanumeric value from 10 non consecutive cells (highlighted yellow). When I use the MAX function it works fine should I only have numbers in the 10 cells, but the values in the cells very from 1A to 5Z [all instances of these values are shown in a table on sheet2 with their 'scoring']
View 2 Replies View RelatedI have a rather difficult task to accomplish. What I need is to be able to extract an alphanumeric value from the string. It is a serial number of the equipment and it is always nine alphanumeric characters long. The problem is it can be anywhere in string. Example: “2156545 36 month lease NWL023568 Nancy Clay”. The serial number I need to extract is NWL023568.
View 7 Replies View RelatedI have values in cell like,
1,2,3 & 4
10,11
8,9,10,11,12
etc.
the formula to get min and max from this string
for the first value Min = 1 and max = 4,
for the 2nd value Min = 10, and max = 11
fo the 3rd one Min = 8 and max = 12
Objective: To create a list of numbers based a cell which are present in an alpha-numeric string
Issues: "-" shows up at times without the context of numbers (i.e. MS-DRG)
Issues: I am not interested in float numbers (i.e. 37.63-37.66)
'Example data in cells (row 1 = A1, row 2 =A2, row 3 = A3, row 4 = A4)
MS-DRGs 767-768, 774-775
Rev 115, 125, 135, 145, 155, 655-656
Rev 174
MS-DRG 001 with ICD-9 37.63-37.66, 37.52
'Desired Results (row 1 = B1, row 2 =B2, row 3 = B3, row 4 = B4)
767,767,768,774,775
115, 125, 135, 145, 155, 655, 656
174
001
I am trying to create a SUMIFS statement with an alphanumeric criterion. I have found formulas that delete specific alpha-strings from the alphanumeric criterion before summing, but I have multiple different alpha-strings for the different departments.
Right now I have:
Code:
=SUMIFS(E4:E100,G4:G100,ā€¯>1.67ā€¯,)
But I need to add in that the alphanumeric values in C4:C100 are >= 3000. There are always 3 letters at the beginning of the course codes and then a space before the 4-digit number.
I tried
Code:
=SUMIFS(E4:E100,G4:G100, ">1.67",C4:C100,">=*3000")
But that, alas, did not work and it does not appear RIGHT works with SUMIFS.
I have created a log file for work which records jobs processed. Additional code has just been added to retrieve job information data from a statistical process control program. This works fine however the spc program outputs the Ohmic value as ohms which I need to convert into alphanumeric format. For example: job value is 24K4, spc outputs as 24400 which I need to convert to 24K4. The Ohmic values range from mOhms to gOhms. Examples below.
0.003 = R003
0.025 = R025
0.150 = R15
1.0 = 1R0
15 = 15R
3600 = 3K6
1700000 = 1M7
220000000 = 220M
1000000000 = 1G0
Bearing in mind that the above are just examples of possible values, is it possible to convert numeric values to an alphanumeric format similar to those show above using VBA? You may ask why I need to convert. The log file allows manual input of job information where the value is entered in alphanumeric format. It also contains a search form which displays results allowing the user to see if a job has been processed. Obviously it is easier for the user if the job value is displayed as alphanumeric.