I am trying to sort alpha numeric data like so -
PA1
PA2
PB1
PB2
PB10
When I sort, the alphabet part is sorted right, but the number part is is not what I want -
PB10 is right below PB1-
PB1
PB10
PB2....
Ok, before any one shoots me down, i have looked around the forum and the internet for a answer, Im im half way there.
I have a column in my worksheet which contains alphanumeric data, I also have a Custom menu option to sort the worksheet but 3 columns.
No i know if i have a column contains the following ....
Have an array that contains file names similar to these:
\serversharesmysharesomefolder3_s6_macro_cycle22_2Ft10p75.txt
\serversharesmysharesomefolder1_s6_macro_cycle22_2Ft10p75.txt
\serversharesmysharesomefolder25_s6_macro_cycle22_2Ft10p75.txt
\serversharesmysharesomefolder32_s6_macro_cycle22_2Ft10p75.txt
I need to sort the array in ascending order based on the file name. The file name is after the last “” and starts with a number(s). From my example above I would like the resulting sort order to look like this:
\serversharesmysharesomefolder1_s6_macro_cycle22_2Ft10p75.txt
\serversharesmysharesomefolder3_s6_macro_cycle22_2Ft10p75.txt
\serversharesmysharesomefolder25_s6_macro_cycle22_2Ft10p75.txt
\serversharesmysharesomefolder32_s6_macro_cycle22_2Ft10p75.txt
I want to use the Application.GetOpenFilename to populate the array and then process the filenames.
I assumed you data starts in "A1"
Results start "F1"
Code:
Sub MG19Dec38()
Dim varFiles As Variant ' used to hold array of file to open
Dim ray
Dim j As Long, i As Long
Dim Temp1 As Integer
Dim Temp2 As Integer
Dim Tem As String
' ray = Application.GetOpenFilename("Txt Files (*.txt), *.txt", , , , True)
I have a fairly large list (1200 rows) of part numbers that I would like to sort. The part number has text and numbers, with a number in the middle. I need excel to ignore this middle number when sorting (but not any of the other numbers). Excel currently sorts like this:
MKDSN 1,5/ 3
MKDSN 1,5/ 3-5,08
MKDSN 1,5/ 4
MKDSN 1,5/14-5,08
when I want it to sort like this:
MKDSN 1,5/ 3
MKDSN 1,5/ 4
MKDSN 1,5/ 3-5,08
MKDSN 1,5/14-5,08
The first few letters in the part number or the numbers at the end aren't consistant. But it's always the numbers after the "/" and before the "-" (where there is one) that I want to ignore.
At the very least I would I need the list in alphabetical order. I don't need the list to be sorted by the "ignored number" at all. Meaning, I would be happy with this result:
MKDSN 1,5/ 3
MKDSN 1,5/ 4
MKDSN 1,5/ 2
MKDSN 1,5/14-5,08
MKDSN 1,5/ 3-5,08
MKKDS 2/24
MKKDS 2/20-3,5
MKKDS 2/ 2-3,5
I don't mind getting rid of "/" or spaces or "," in the part number, but I would prefer to not split the part number between two columns.
I tried creating a custom list, but there are just too many varieties to list them all.
I need to automatically populate a column with an alphanumeric MFR0001 to MFR9999 and am currently using the formula below to add 1 to the start point (A1)...
A1=MFR0001
Formula in A2 =LEFT(C1,3)&(RIGHT(C1,4)+1)
This works perfectly if I start at MFR1000, but breaks and drops the 000 if I use it on the number I need to start with (MFR0001).
I'm looking for a formula or function to identify cells that are alpha numeric. The alpha is not necessarily in the same place (i.e. 1st, 4th. etc) in each cell. Some cells are all numeric.
What can I do to identify cells that are alpha numeric?
I've tried several things to accomplish this with no luck, but I'm sure it's not too tough to do:
On my worksheet, I am entering columns of cells with alphanumeric data. The data are actually thousands of reference numbers that need to go in chronological order, with only the numerals changing (e.g., ABC0001DEF, ABC0002DEF, ABC0003DEF..., with "ABC" and "DEF" always the same).
I can create a series just fine if I leave off the "DEF" part of the reference numbers (by selecting the first couple cells in the series and using the fill handle), but I can't get the same results with the numerals "nested" within the reference numbers (i.e., ABC####DEF).
It sure would save me a lot of typing to be able to create a series to fill in all my reference numbers!
I have in two cells :
a1 b1
1m 1-3-6-11-17
how can I get:
1m1
1m3
1m6
1m11
1m17
using vba code.
I'm currently working on a spreadsheet for my husbands work in a school environment. All was going well until I hit a wall with the alphanumeric data of the current uk stats system. Is there any way of getting my 4c...4b...4a...etc. to chart?
View 1 Replies View RelatedI require a custom formula for in cell data validation of an 5 digit alphanumeric entry. The valid format is ANNNN (1 x alpha & 4 x numeric). Case of the aplha is not an issue.
View 3 Replies View RelatedI'm running Excel 2007 on Windows 7.
I've got a crude code which searches for multiple alphanumeric data. The code is below:-
Code:
Cells.Find(what:="1kp", _
LookIn:=xlFormulas, _
lookat:=xlWhole, _
[Code]...
I want to make this code more efficient by searching for either 1kp, 2kp or 3kp in one process & 'doing the same thing' at one time. How do I achieve this?
Explained slightly differently, the code should look something like this:- Find 1kp or 2kp or 3kp. Then do something with the found results.
I have a column of data that contains text such as 'as per A3', 'B4 requested' and 'as per F6 Mark' (these aren't cell references).
I'm trying to find a formula that will just strip out the 'A3', 'B4' and 'F6' element of the text. I've tried SEARCH with wildcards but it's not working, and can;t use the LEFT RIGHT or MID functions due to the inconsistent data.
Columns A & B contain several thousand Project Numbers (e.g., P1052, PA844, etc.). Many of the Project Numbers in column B are the same as in column A, but column B also has additional (i.e., newer) Project Numbers scattered throughout. Ideally, I would like to use a built-in function (versus a custom function if possible) that compares all the Project Numbers in both columns and then separately lists those that are unique to column B.
View 9 Replies View RelatedFormula to automatically do these operations in the table below?
"column I1" contain data which I need to find in between columm B1:H1; and marked them red.
I need to do same operation for row2 to row4. I need a formula that can automatically find and mark the data in red.
I need to put a formula in B6 to count the data marked in red for column B1:B4 and do the same operation for C6,D6...H6.
A
B
C
D
E
F
G
H
RESULTS
p1
11
01
12
22
21
M1
10
11
[Code] ..........
I'm using Excel 2010 and I applied a Data Filter to a simple table. I then messed around with the drop downs in each column, sorting the data by different criteria. After doing this, is there a simple way to get the table to revert back to its original order/form?
View 3 Replies View RelatedI am trying to create a "Master Sheet" where I enter in the column data and after I have entered my data for each row, I can select the button which toggles the macro to run. I have it built to build new sheets as new clients are obtained. My problem is after I have a sheet that has client's data I cannot get new data to add itself below the data that is already there. I want each client's sheet to keep adding rows as more data comes in. My current macro is :
[Code] .....
Attached File : Data Entry Macro.xlsx
I copy/paste the data from this website [URL] ........
How I can sort all the data based upon the "Date"? The date data is not recognized when I copy/paste.
I need to have cell data on sheet 1 to populate cells / rows on sheet 2 when the data is sorted on Sheet 1.
So let me explain: I have workloads on each row in Sheet 1. Column A has a list of people that I assign to each workload. After assigning a name in Column A to each row, I sort Column A by the user to print out only their workloads.
Currently, we have a paper worksheet where they manually write in their workload. I have replicated this worksheet on Sheet 2 and was wondering if I could use the data in Sheet 1 after being sorted by user, to populate the worksheet on Sheet 2 ?
I have five columns of data A to E. In each row there can be data in either 2 3,4 or 5 of the columns. What I want to do is essentially condense the data. So in columns, say, G,H,I J,K if there is data in column A then It goes into column g, if not it asks if there is any data in column b and so on. Then for H it does the same but one on. I have attached an example to show what I would like to happen.
View 9 Replies View RelatedI am encountering numerous problems compiling a macro to sort some pretty messy data. Hoping some of you could take a look and offer some suggestions....
The Data I need sorting is shown in the 'DATARAW' worksheet, this comes in every day and shows positions for each traded period. Usually 48 periods which I have highlighted although the data download could somtimes consist of 46 or 50 periods.
Sheet 1 (DATA RAW) contains data which I download daily.
Sheet 2 (Data Sort) is how I need it to look after sorted (I only need the data in DATARAW replacing, not another worksheet creating).
So for example:
Where column A = SP8 and the adjacent column B = 1 I would need:
All values which = ECN to concatenate the value in B to the reference in column B directly adjacent to the value next to it, until the folowing rows are presented:
So for instance the first value reported would be 131964, second 131979 etc... until the following text is shown in the rows below
IDD
CAT
ACE
ACT
ACE
ACT
When these appear I need the entire rows to be deleted.
Then basically the same for the next period where SP8 appears in column A and 2 appears in Column B.
also, the final result should contain no formulas so it can be referenced by lookups etc... also, all numeric colums should be stored as number so excel doesn't get confused.
This will basically repeat itself until the end of the file showing the same split as aove but with ZZZ as a footer. Which I also need to delete. :-S
IDD
CAT
ACE
ACT
ACE
ACT
ZZZ
Rows containing the values below also need deleting.
AAA
NOH
DSI
AED
I've used colours in the attachment but the actual file doesn't have any.
I use my VBA code to sort the data in certain columns. I have been doing it with the following
View 4 Replies View RelatedHow do I sort this data, such that I just have individual numbers in a row.
******** ******************** ************************************************************************>Microsoft Excel - Neil.xls___Running: 11.0 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutU1291=
UVWX1291COAL AT 5.82-5.86; 24.16-24.20; 24.64-25.77; 26.30-28.31FALSEFALSEFALSE1292COAL AT 23.52-23.57; 26.12-26.16; 44.58-45.57;46.10-47.85FALSEFALSEFALSE1293COAL AT 23.24-23.27;5.62-25.67; 42.12-43.05; 43.63-45.57FALSEFALSEFALSE1294COAL AT 39.16-39.24; 59.10-59.90; 60.47-62.40FALSEFALSEFALSE1295COAL AT 15.77-15.82; 22-22.06; 39.41-40.52; 40.75-42.80FALSEFALSEFALSE1296COAL AT 14.03-14.08; 16.48-16.53; 34.19-35.32; 35.76-37.81FALSEFALSEFALSE1297COAL AT 15.92-15.97; 35.81-36.85; 37.33-39.33;FALSEFALSEFALSE1298COAL AT 37.30-37.35; 58.09-58.93; 59.41-
The problem also arises, when I have data like this as well:
******** ******************** ************************************************************************>Microsoft Excel - Neil.xls___Running: 11.0 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutU1325=
UVWX1325APPROX DATE. COAL SEAMS: COAL SEAM 220FT6IN-221FT1IN; ALFRED SEAM 306FT5IN-310FT6IN.ALFRED [UTRECHT (COAL)]93.3994.6401326APPROX. DATE. COAL SEAMS: 47FT9IN-48FT; 185FT10IN-185FT11IN; 217FT4IN-219FT7IN; ALFRED 294FT6IN-296FT4IN; GUS SEAM 312FT5IN-312FT11IN; DUNDAS SEAM 323FT4IN-323FT10IN.056.6456.6701327APPROX. DATE. COAL SEAMS: ALFRED 224FT1IN-228FT1IN; GUS 250FT9IN-251FT8IN.GUS [UTRECHT (COAL)]76.4376.7101328APPROX. DATE. COAL SEAMS: ALFRED 224FT1IN-228FT1IN; GUS 250FT9IN-251FT8IN.FALSEFALSEFALSEKZN Coal Boreholes with Coal In
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Those numbers with Feet and inches, I want it to be converted into meters as well.
I am trying to create a macro where users can rearange data in a table. I used the macro recorder to sort the data in colmn C in descending order and this is the code that I got:
VB:
ActiveWorkbook.Worksheets("By Client").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("By Client").Sort.SortFields.Add Key:=Range( _
"C3:C176"), SortOn:=xlSortOnValues, Order:=xlDescending, DataOption:= _
xlSortNormal
With ActiveWorkbook.Worksheets("By Client").Sort
[Code]...
This works for the table as it is but the range may change as more rows are added to the table. I want it to start at row three as the first two rows are headers but in future tables the bottom row may not be 176. I dont want to include all rows as row 177 contains totals that I dont want to be included in the sort. what I should put as the range so that this macro will work regardless of how many rows are in the table?
I attached document, in that document I made formula in Pressure cell which is INDEX MATCH MATCH to get the result.
But what I wanted is, when I type 10.4 in Temperature cell, the Pressure cell will show the result which is 1261.24 directly without I have to fill in two temperature cell to make it 10.4.
I have sorted my data by three layers. First by Budget Center, then Invoice, and then Account. I am having trouble writing a formula that will total the amounts by account with respect to its invoice and budget center.
excel forum2.xlsx
I have A spreadsheet.
The spreadsheet contains 8 worksheets, of which I am only concerned with 7 as the 8th merely presents a graph.
The first 6 worksheets all contain raw data exported from BMC Remedy indicating the names of users who logged incidents to have their passwords reset or their AD Accounts unlocked over a 6 month period, hence 6 worksheets (per month basis).
The 7th worksheet contains raw data from another application known as FIM (A MS based interface which allows users to reset their own passwords) indicating all users who are registered to utilize this functionality.
The goal of my exercise is to consolidate the data and sort it to such an extent where I can ascertain which users phoned the service desk to log an incident for a password reset, even though they are registered to do it themselves via FIM ... I have been going through the list manually and it took me 10 solid hours to go through 265 ... ... ... ... I have 3'900 to go through!
I have an issue with some data that I need to sort into several columns. Basically, I have a column that has data listed in each cell like this; A 567 T 1 D3. What I want to be able to do is sort that data into several columns. I am not sure how to do this at all. I have attached my data to be looked at. I have already started the process but manually, and I don't feel like having to do this manually as this is very time consuming considering I am trying to sort the data into ~1927 rows and 5 columns.
View 2 Replies View Relatedfor example:
Column A.
@yahoo.com
@hotmail.com
@live.com
@msn.com
@yahoo.com
@hotmail.com
@live.com
@msn.com
how can i separate all datas by domain without having to cut and paste them manually.
I need to data sort several rows of a worksheet, followed by a different selection of rows, followed by another selection, etc, etc. The first selection is done by highlighting the rows and then following the data sort menu. \
However, if I try to highlight a second selection and use the repeat command, excel repeats the action on the first selection, not the second. As a result, I have to use the data sort menu again. There must be a repeat option which acts on the new selection.
Every week I export a payroll report from my payroll provider (sample attached). The report is sorted by employee name. I need this report to be categorized by department and show a subtotal for each department. The payroll provider does not provide a means to put departments in the system.
I'd like to find a way to automate this as much as possible. The final report has to have a column that reflects each employee's department and the report must be sorted by dept with a subtotal for each dept. I tried to do this using a second worksheet that lists each employee and the dept they work in and linking it to the payroll summary using =IF; that obviously did not work.
Does anyone have any suggestions as to how this can be accomplished? The process would need to be repeated for many clients each week, so I'd like to keep it as simple as possible.