1. Can I lock particular cell If Yes,How? I want to lock cells which contains formulas.
2. If cell K7 shows 11 I want to see G11 in H9. Same if Cell K7 shows 201 I want to see G201 in H9.
Its a interest calculation sheet where K7 is number of days amount invested and COLUMN G shows interest accured.
I'm an amateur to macro as I'm only in a low level class at a university... But I'm attempting to make a macro for a bank interest calculator. It asks your type of account(which then assigns an interest rate to it), how much money is in the account, and also how long th emoney will be in the account. I used a "Select Case" for the account types, but I seem to be struggling for it to work, it won't put the value of the total into the assigned cell, or it's just not computing it(as I get "0" each time I run it)...
Public Function BankCalculator()
'Bank Calculator for different accounts
'declare variable
Dim shtBank As Workbook, strAct As String, intMon As Integer, strLong As Integer, intTotal As Double
Set shtBank = Application.Workbooks("Bank Calculator.xls")
'input box for amount of money, assign address
intMon = InputBox(prompt:="How much money do you currently have in the account?", _ ......................................
i am having problem with doing team, i would like to lock cell contain formulas but allow users insert row.
View 2 Replies View RelatedIs it possible to lock all cells with the exception of a select few(say a column) based upon a date? I have a spreadsheet where I want to lock all cells with the exception of the current months information. I want the spreadsheet to auto unlock the date that is listed on the top of the spreadsheet. I have columns for all months of the yea and I have the current month listed in cell A1. I want match the A1 cell to the column header to unlock the correct column.
View 4 Replies View RelatedI need to create a macro to where once a cell has had a formula or data inputed that it locks afterwards and cannot be edited without unportecting the sheet or not at all. The problem is I have no idea how to program in VBA. I can get there and select the worksheet but after that I am stumped. How would I enter the macro and what should the macro look like?
View 2 Replies View RelatedI have a problem calculating a total interest for an input period that has different interest rates. You can see the attached file: INTEREST.xls
I have used a function but the result comes out wrong. Can I fine tune it or do I have to change my method of calculating.
I have a person who was paid £1000 pension pa for ten years. I've found out that the pension should have been split 50/50 with half increasing by 5% pa. Thus in year 1 total pension would be £1000. In year 2 the total pension would be £1025 ((£500 x 1.05) plus £500)
I know that in year 10 the total pension should be £500 (non increasing) plus £814 (£500 x 1.05 to the power of ten). My problem is how do I work out a formula which calculates the total arrears due in year ten? I'm thinking the arrears due after the ten years is £314 but something is telling me it's a lot more.
I am trying to set up a budget for my self. Of course I am trying to make it as complicated as possible.
I have done searches online and that is how I found this forum. I am finding amortization formulas, but not what I want
Here is my question.
I have two fields, Mortgage and auto loan
I want to have a field that does a calculation for me.
I know following fields as an example making numbers up
Interest rate is fixed at 5.5%
Amount left on loan is 150,000
Loan is fixed at 30 years with 28 years left
I want to run a formula so when I make a monthly payment of 1000 dollars how much of that goes to interest, how much to principle (not to make this complicated even more, but let say that I have 200 escrowed which I am not sure if that has interest calculated on(I don’t think so as it is property tax?))
Same example for car loan.
5 year loan, 4.5% interest, payment 438 a month.
I have been raken by brain for a simple formula to calculate an Interest Only Payment on a mortage note, example,
sales price = $162000
term = 360
interest = 8.5
I was able to calculate the payment of principle and interest, but I need to validate what would be an Interest Only payment on this?
If i borrow Rs.50000/- at 7.25% interest compounding monthly, repayable in 4 quarterly instalments, when i put it in excel using pmt function for emi quarterly payment and ipmt for interest calculation at the end of the 4th quarter (i.e last instalment) the balance will not become zero it shows a balance of Rs.14.35 its due to interest compounding monthly, is there any formula in excel to overcome it?
View 2 Replies View RelatedI use Excel 2007 , I created Interest calculator , on Daily basis , to caluculate interest , compounded quarterly.
But I want to make it compact , as d one I created is long enough.
A3 = Principal Amount
B3 = Date of Investment
C3 = Interest as on Date
D3 = Number of Days , amount Invested {comes out of formula set}
E3 = Rate of Interest
Now in F3 I want the Interest amount , compunded quarterly.
Some times NUMBER OF INVESTED CAN BE LESS THAN 90 DAYS TOO...then what ?
I am currently trying to create an excel spreadsheet where I would know how much interest I will pay in the next six months, since the balance changes every month I am not sure how to formulate the total interest paid with in a specified time period.
I currently can calculate the interest and fill in the below rows with each month but I would like to simplify the report so that I can add the Balance, Rate, Payment(2% of balance), and Time period and in another cell it will tell me how much interest I will pay in that time period. Bascially I would like to keep all the calculations in one row.
For example
Balance | Rate | Payment | Time Period | Interest Paid
$1,000 | 10.00%|$20.00 | 6 | $48.56
I am trying to calculate the effective annual interest rate earned on an investment and find the results are close but not really accurate. I suspect because I have not included the frequency of interest in my existing formula
r = n * nt root (A/P-1)
where;
r = the effective interest rate
n = the number of times interest is added per year
t = the total number of years
A = the current value
P = the original value
The 2 problems I face are;
1. Confirming this formula would provide the correct answer (need maths expert here) &
2. How would "nt root" (as in sqr root, but using the product of the years and frequency) be used in Excel
I have developed a financial calculator that asks the user for the "input date" which is used to record balances as of the input date. My interest calculation for the first year is based on the current date compared to the input date. For example, if the user is keying in a current balance of 10,000 @ 10% interest, and the "statement date" or "input date" is 12/30/2013, and the current date is today, 2/4/2014, then it should calculate interest for the entire year of 2014. It is not doing that. It calculates $3 interest.
But if input date is 6/30/2013 with current date of 2/4/2014, it seems to work OK. It calculates interest of $504 in that case. It appears to get messed up with the year transition between current date and input date. The formulas I have listed below appear to work fine except when the input date is 2013 for the year and the current date is 2014. The formula does not "see" that input date was last year. There must be a minor tweak to formula I am overlooking.
Cell C2 = Today's Date=TODAY()
Cell C3 = Input date (user keys in date in mm/dd/yyyy format)
Cell E2 = "translate input date to year format" =DATE(YEAR(C3),12,31)-C3
Cell E3 = Investment Rate
Cell G2 = yr 1 interest rate adjusted =(E3/1)*($E$2/365)
Cell C21 = Current Balance
Cell D21 = Interest Yr1 = C21*G2
I need the interest calculation to account for partial year accrual.
I would like to have an excel table that has 240 usable lines going horizontal (to the right) and vertical (down) from the starting number.
I need it to compound interest in both directions
240 is the total number of days per year I am trying to track
There should be adjustable starting amounts and compound interest
Be able to adjust the entered amount anywhere along the time line and it recalculate the amount from there on...
I would like to know the calculator formula for addition via columns.
Eg 1. If i were to place 135 into Column A ;
12.95 into Column C ;
i would need to yield a result of 147.95
Eg 2. Place 189 into Column A ;
12.95 into Column C
i would need to yield result of 201.95 and so on. in the attachment is the sample file.
What I am trying to do is to create a formula for the attached spreadsheet - that calculates the daily compounding interest based on the higher rate of the two rates for the first five years then after 5 years the calculation should only be based solely on the blocked rate.
View 5 Replies View RelatedI use the attached workbook to keep tack of feed use in turkeys. when a new flock is added to a farm (Airport View or Home farm) A template is copied and pasted from the "templates" sheet depending on what type of diet they will be on. (Ralco ABF or Ralco Standard) that template refers to the Ration sheet to calculate how much corn is in each diet. After a flock is complete I will never change the numbers again, it is just for record keeping. I want to be able to change the Corn/ton numbers in a ration (on the rations tab) if need be and not affect all the older completed records.
View 1 Replies View RelatedHow to lock a formula column that need a password in editing the formula
View 3 Replies View RelatedI have a sheet which contains conditional formatting formulas.How i can Lock or protect the forumluas to view others.
View 2 Replies View RelatedI have Book having 11 Tables.
In each Tables in Column F i have formula like., =INDEX(Sheet2!A:A,MATCH(Jyotindra!G10,Sheet2!B:B,0))
I want to lock only column F for all Tables. and hide formula
All other columns and cell should be free to excess or edit.
How can i do that for all sheet at once?
If E16 is "No", then disable/lock F16 G16 & H16 & maybe turn it grey if that is possible.
I then need to repeat this for all the other rows too.
How to Lock/Unlock an Excel Cell Based on the Contents of Another Cell?
View 1 Replies View Related=IF(A4='Exported Data'!B2,'Exported Data'!C2,"")
How can I lock A so when I copy over to the right the formula doesn't change that reference to B4?
Is there a way to have the True value (Exported Data'!C2) reference one cell over instead of selecting the cell to reference from?
Need code that would make cell J2 be populated with U no matter what was placed in cell J2 either manually or externally.
View 9 Replies View RelatedI can have amacro which will lock each cell where a "Y" or "N" is inserted........ eg the netire sheet is unprotected but the moment Y is inserted in C 5 the cell gets locked, next entry in D 10 has a N entry and that too upon entry get's locked
The idea being once Y or N is typed that cell can no longer be changed
Currently have a column of cells that after the data has been entered we would like the cell to lock to prevent changes. The sheet is currently protected with the cells in question unlocked (D173:D250). We would like to be able to change the data if we unprotect the sheet. We would also like to be able to add/delete cells (list) in the code as needed.
View 9 Replies View RelatedI'm trying to write a vba code that does the following....
There is a question in column A to which the user chooses yes or no from column B. Based on the response in column B, I'd like the same row column D to be formatted so that if the anser is yes, the cell is white, and unlocked. If the response is no, the cell is cleared, locked and the greyed out. (e.g. if B4 is "Yes", the format in D4 will change) So far I've come up with the following which formats the colour:
Dim response As Range
For Each response In Range("$C$10:$C$73")
If response.Value = "Yes" Then
response.Select
ActiveCell.Offset(0, 2).Range("A1").Select
With Selection.Interior
[Code] .......
How to add in a .clearcontents function, so that the contents are cleared if the response is not "yes", and also what I would need to add to unlock the cell in column D?
Is it possible to lock in the formatting that would require 12 digits even if someone was copying and pasting to the cell?
We are looking to make our users add information into cells in the format 0-00000-00000-0. They are often copy and pasting, thus overwritting the custom format we have in those cells.
I've looked at validation, but custom only works for a formula.
I have a multisheet excel workbook that I am programming. I was wondering if there is a way to lock a cell on one sheet after the initial value was put in, allowing me to change it later. This may not be so clear so here is the problem....
I have Workbook1. The input from cell A3 on Sheet1 is 5. I have made a second sheet called Order Form. In cell B5 of Order form I have made it ='Sheet1'!A3. I am looking for a way to be able to change cell A3 on Sheet1, but keep the 5 on Order Form.