I would like to have an excel table that has 240 usable lines going horizontal (to the right) and vertical (down) from the starting number.
I need it to compound interest in both directions
240 is the total number of days per year I am trying to track
There should be adjustable starting amounts and compound interest
Be able to adjust the entered amount anywhere along the time line and it recalculate the amount from there on...
I am trying to calculate the effective annual interest rate earned on an investment and find the results are close but not really accurate. I suspect because I have not included the frequency of interest in my existing formula
r = n * nt root (A/P-1)
where;
r = the effective interest rate
n = the number of times interest is added per year
t = the total number of years
A = the current value
P = the original value
The 2 problems I face are;
1. Confirming this formula would provide the correct answer (need maths expert here) &
2. How would "nt root" (as in sqr root, but using the product of the years and frequency) be used in Excel
I have a column of years and a column of numbers representing annual
amounts placed in a savings account for the year. I would like to calculate
the balance of interest earned added to the balance of the account and then
calculate the interest earned on the accumulating amounts each year. The
results would be the account balance displayed in an adjoining column. So
far, I have not found a worksheet function for that. Could someone point me
in the right direction? Perhaps there should be several columns of data?
I am trying to create a calculator based on a worksheet I have. I do not know how to write a formula for simple interest calculations and for compound interest calculations.
View 4 Replies View RelatedFormula to calculate a daily compound interest based on the higher rate of the two rates for the first 5 years, then after 5 years the calculation would only be based solely on the blocked rate.
View 4 Replies View RelatedI am trying to work out a formula to calculate compounded interest rates.
I have a table that is 24 columns wide (months).
1 row that will have amounts input in to the columns (these will be different amounts)
I want to have a row along the bottom that calulates the compounded interest at a fixed interest rate on the total amount that is in the first row.
I have managed to do this using a table but surely there is a formula for this as the table can become very troublesome if the input amounts change.
Ive added an image (attached) : excel.jpg‎
I am trying to set up my excel to calculate daily compound interest.
The amount is 10,000 at 0.75% per day for 6 months.
I have tried several different things with no success -
I am looking for a formula which will compute interest earned (not ending account balance) for the following scenario:
1) Set $ amount (say 19250) is deposited on January 1.
2) Annual interest rate is .95%
3) Interest is compounded daily
4) Fixed withdrawals of $1750 are taken each and every month on the first day of each month
What is the total interest earned on the account? Basically, it is a issue where each month diminishes the "pool" of money earning interest. I get what's going on conceptually, but can't figure out which Excel function to use.
I am looking to calculate compound interest over a period of 10 years.
I am looking at putting a lump sum in at the beginning and contribute in monthly installments for the entire 10 years. How would I go about this.. I know there are formulas there, however I'm not a financial person at all..
I'm trying to come up with a way of calculating Money earned over time by compounding interest, but with a twist. After reaching a set amount of money, all money above and beyond does not gain interest. example:
Principal: $120 (user input value)
Duration: 9 (user input value in days, compounding daily)
%Intertest: 4% (user selected value, either 2% or 4%)
Max interest you can earn: $6 (fixed)
Max interest generating money: $150 (variable dependant on %interest, = $150 or $300)
Response/Answer is final value. I don't need the daily results like the example.
Result would be: $170.84
$124.80 (4.80 interest)
$129.79 (4.99)
$134.98 (5.19)
$140.38 (5.40)
$146.00 (5.62)
$151.84 (5.84)
$157.84 (6.00 reached the max interest level)
$163.84 (6.00)
$170.84 (6.00)
my equations I have so far only do one (below 150 total) or the other (above) but not both. and its just a regular formula: =IF(P<M,IF(P*I^D<M+1,P*I^D,"over limit"),P+6*D)........................
I've found this calc but it doesn't compare to my particular scenario/goals: http://dinkytown.net/java/InvestmentDebt.html. The major difference is that this dinkytown calc requires a new loan to be put in place and I am not in a position to refinance my current mortgage. My plan is to pay an extra $267 (b3) to the mtg (b4). It will take 128 months (b6) to pay off the mortgage. After that point, I need to calculate what the newly freed capital (b5) would do if I put in an account (i.e. a CD or a simple US savings account) that had an Annual Percentage Yield (APY) of 1, 2, and 3% for 20, 15, 10 and 5 years. I thought that I had the right formula in place for cells b7:b8 should the account earn a 0% rate of return, but I think it's faulty since it gives me a negative number for 10 and 5 year accumulation periods.
View 2 Replies View RelatedI have a column of 30 cells, each showing retirement dollars earned based on years of service (cell 1 = year 1, etc) and salary. Here is the predicament: A new hire is brought in with 10 years service, stays 5 and then quits. How do I change only cells 10-14 reflecting his/her salary and retirement dollars? Remember, cell 10 is the first year for the compound interest, cell 11 the second year, etc. I currently use the following formula for cell 10 (compounded salary from cell 9 * (1+.05)^1). Cell 11 is (compounded salary from cell 10 * (1.05)^1.
View 5 Replies View RelatedI have been loaning my brother money over the past 14 months. The loans have been in the form or $1000 per month plus random payments for one-off expenses like doctors fees. He's not paid anything back yet but we want to know what the total owed is for interest of 10% per annum.
I can easily create a table with payments I've made and the dates with a running total of how much I've paid but how to I create a running balance of what he owes over time based on adding in interest. This might end with a one-off payment in a couple of months, I'd like to calculate what is owed there as a minimum.
I have a problem calculating a total interest for an input period that has different interest rates. You can see the attached file: INTEREST.xls
I have used a function but the result comes out wrong. Can I fine tune it or do I have to change my method of calculating.
I have a person who was paid £1000 pension pa for ten years. I've found out that the pension should have been split 50/50 with half increasing by 5% pa. Thus in year 1 total pension would be £1000. In year 2 the total pension would be £1025 ((£500 x 1.05) plus £500)
I know that in year 10 the total pension should be £500 (non increasing) plus £814 (£500 x 1.05 to the power of ten). My problem is how do I work out a formula which calculates the total arrears due in year ten? I'm thinking the arrears due after the ten years is £314 but something is telling me it's a lot more.
I am trying to set up a budget for my self. Of course I am trying to make it as complicated as possible.
I have done searches online and that is how I found this forum. I am finding amortization formulas, but not what I want
Here is my question.
I have two fields, Mortgage and auto loan
I want to have a field that does a calculation for me.
I know following fields as an example making numbers up
Interest rate is fixed at 5.5%
Amount left on loan is 150,000
Loan is fixed at 30 years with 28 years left
I want to run a formula so when I make a monthly payment of 1000 dollars how much of that goes to interest, how much to principle (not to make this complicated even more, but let say that I have 200 escrowed which I am not sure if that has interest calculated on(I don’t think so as it is property tax?))
Same example for car loan.
5 year loan, 4.5% interest, payment 438 a month.
I have been raken by brain for a simple formula to calculate an Interest Only Payment on a mortage note, example,
sales price = $162000
term = 360
interest = 8.5
I was able to calculate the payment of principle and interest, but I need to validate what would be an Interest Only payment on this?
If i borrow Rs.50000/- at 7.25% interest compounding monthly, repayable in 4 quarterly instalments, when i put it in excel using pmt function for emi quarterly payment and ipmt for interest calculation at the end of the 4th quarter (i.e last instalment) the balance will not become zero it shows a balance of Rs.14.35 its due to interest compounding monthly, is there any formula in excel to overcome it?
View 2 Replies View RelatedI use Excel 2007 , I created Interest calculator , on Daily basis , to caluculate interest , compounded quarterly.
But I want to make it compact , as d one I created is long enough.
A3 = Principal Amount
B3 = Date of Investment
C3 = Interest as on Date
D3 = Number of Days , amount Invested {comes out of formula set}
E3 = Rate of Interest
Now in F3 I want the Interest amount , compunded quarterly.
Some times NUMBER OF INVESTED CAN BE LESS THAN 90 DAYS TOO...then what ?
I am currently trying to create an excel spreadsheet where I would know how much interest I will pay in the next six months, since the balance changes every month I am not sure how to formulate the total interest paid with in a specified time period.
I currently can calculate the interest and fill in the below rows with each month but I would like to simplify the report so that I can add the Balance, Rate, Payment(2% of balance), and Time period and in another cell it will tell me how much interest I will pay in that time period. Bascially I would like to keep all the calculations in one row.
For example
Balance | Rate | Payment | Time Period | Interest Paid
$1,000 | 10.00%|$20.00 | 6 | $48.56
I have developed a financial calculator that asks the user for the "input date" which is used to record balances as of the input date. My interest calculation for the first year is based on the current date compared to the input date. For example, if the user is keying in a current balance of 10,000 @ 10% interest, and the "statement date" or "input date" is 12/30/2013, and the current date is today, 2/4/2014, then it should calculate interest for the entire year of 2014. It is not doing that. It calculates $3 interest.
But if input date is 6/30/2013 with current date of 2/4/2014, it seems to work OK. It calculates interest of $504 in that case. It appears to get messed up with the year transition between current date and input date. The formulas I have listed below appear to work fine except when the input date is 2013 for the year and the current date is 2014. The formula does not "see" that input date was last year. There must be a minor tweak to formula I am overlooking.
Cell C2 = Today's Date=TODAY()
Cell C3 = Input date (user keys in date in mm/dd/yyyy format)
Cell E2 = "translate input date to year format" =DATE(YEAR(C3),12,31)-C3
Cell E3 = Investment Rate
Cell G2 = yr 1 interest rate adjusted =(E3/1)*($E$2/365)
Cell C21 = Current Balance
Cell D21 = Interest Yr1 = C21*G2
I need the interest calculation to account for partial year accrual.
1. Can I lock particular cell If Yes,How? I want to lock cells which contains formulas.
2. If cell K7 shows 11 I want to see G11 in H9. Same if Cell K7 shows 201 I want to see G201 in H9.
Its a interest calculation sheet where K7 is number of days amount invested and COLUMN G shows interest accured.
What I am trying to do is to create a formula for the attached spreadsheet - that calculates the daily compounding interest based on the higher rate of the two rates for the first five years then after 5 years the calculation should only be based solely on the blocked rate.
View 5 Replies View RelatedI need J22 to multiply based on years in B22 AND increase 5% for each of those years (compounding) after two years (excludes year 1 from 5% increase). In addition the cell needs to remain blank if D22 is blank. B22 = 1, then the stockprice needs to remain the same, and only increase by 5% after year 1.
Currently...
B22 = a number of years indicated by the formula: =IF(A22="","",DATEDIF(A22,I3,"y"))
J22 =IF(ISNA(VLOOKUP(D22,stockprices,2,FALSE)),"",VLOOKUP(D22,stockprices,2,FALSE))
Example:
If J22 stockprice lookup is $1000.00, and the number of years listed in B22 is 6, then the reported value in J22 needs to be $1494.40.
Windows 7 Ultimate / Excel 2010
I am trying to insert a blank row into a table (created using the table function in Excel 2010) without the copying the formulas. Every time I insert a row the the formula is copied.
View 3 Replies View RelatedHave a look at the attache example. I have inventory items which have a fixed value. I have several quantity columns to reflect various inventory positions. (OnOrder, WIP, ATP, ATS, OnHand, PAB as at date()...)
At the top of the sheet I need to show sum of quantities and sum of values. In order to compute the values currently I need to hide columns to the extreme right to do the math on a row by row level and then sum the rows and copy the the value to another cell. In this case the cells with yellow background.
Is there a way to be able to write a formula that would return the sum of the qty multiplied by the value without adding an additional column. I would need to function like with filters as well (like =subtotal())
See attached spread sheet as its a difficult one to describe
We are looking to apply labels to a cell depending upon criteria, the spread sheet contains the scenarios.
I need a formula to automatically change the summary column according to the month we are in.
Ie:
Last Months Data
Nov
Dec
Jan
Feb
1
8
1
7
4
7
9
2
9
'Last Months Data' column should show Dec. However, as we move into February and I complete the 'Jan' column, I would like 'Last Months Data' to automatically change to show Jan's data - is this possible?
I was previously told to use the following formula but this would automatically select the current months data and not the previous months data which is what i need - =INDEX(B2:L2,MONTH(TODAY()))
I have selected a custom autofilter for one column of my data. After that, I want to use the top 10 autofilter in another column, but this appears to filter the top 10 overall, not the top 10 of the custom-filtered records. My data is transformer sizes.
First I custom filter the secondary voltage column to get only distribution transformers (less than or equal to 480). Now I want to know the 10 largest distribution transformers, but the top 10 filter on the size column makes all the records disappear. I believe it is selecting the top 10 overall, and it happens that none of the top 10 have secondary voltage less than or equal to 480. (When I change the custom voltage filter, I can get anywhere between 0 and 10 records for the top 10 by size.)
This seems to be an aspect of Excel, not an error. So far the workarounds I can see are:
1. paste the custom filtered data into a new sheet and then do the top 10
2. use the custom filter, sort descending by size, and count 10--but this problem was first brought up by someone doing the top 100, so this is not preferable.
Does anyone know a better solution that will make it easier to manipulate this data frequently?
I am trying to calculate the compound annual growth and my starting point is a negative number. The example is that I have (273,000) for the YE 2003 and have Growth to the amount of +767,000 at YE 2006. The formula I have been using for other calculations where the starting point is positive is =POWER(J23/C23,1/O$1)-1. Where J23 = a positive amount and C23 = a positive number. This formula works fine, but when C23 = a negative number the formula does not work and the % does not make sense.
View 6 Replies View Related