I have some code here that isn't working for some reason and I'm not sure why... Here is the code:
[Code] ......
I would like the code to take any row that has "JAN" anywhere in column D, and change the value in column J to "January".
I am trying to find a way to populate a column based on the changes in the data of another column...
For example, I want to fill in the code column....so when the customers cost changes, I want a numeric code to populate & change. So for the first 5 lines, the code could be 21, and then when the cost changes to $37.51, want the code to change to 22.
CodeCustomer's Cost
$34.10
$34.10
$34.10
$34.10
$34.10
$37.51
$37.51
$32.50
$32.50
$33.48
$33.48
$34.10
$37.51
$37.51
I have a situation that I cannot get my hands on. I have a set of Project Numbers in my Column A. (Will Try to post an example).
I need that everytime I change a number in my Column B that it will change all the numbers, in my column B, based on the matching Text in my Column A.
Demo1.xlsm
I have data in column A and when i change that data in A, then time stamp should occur in column B. The problem is even when i press enter key in A column cells, i get a time stamp. how to avoid this?
View 2 Replies View RelatedI have a spreadsheet in which column "c" represents a department: 01, 02, 03, etc. every time this value changes I want to do a subtotal. The code I've come up with thus far is:
Sub Subtotal()
Dim lrow As Long
For lrow = Cells(Cells.Rows.Count, "c").End(xlUp).Row To 2 Step -1
if cells(lrow, "c") cells(lrow-1, "c" then range
Selection.Subtotal GroupBy:=1, Function:=xlSum, TotalList:=Array(4, 5, 6), _
Replace:=True, PageBreaks:=False, SummaryBelowData:=True
ActiveSheet.Outline.ShowLevels RowLevels:=2
End Sub
But, I can't figure out how to get set my range to include all the data that pertains to a department to do the subtotal.
I am looking to change to color of an entire row based on the value of a single column in that row....Say I have an issue on a line and the "priority column is set to high" I would like that entire row to turn red....
View 9 Replies View RelatedI have a spreadsheet with data in a1:p100 and i'm trying to find a macro that anytime the cell contents change in either column B or Column F it copies the entire row to another tab in the spreadsheet.
View 9 Replies View RelatedI'm trying to create a list that references an existing data set where I have staff listed month by month and based on today's date, imports only if there is data in that column. I have figured out how to check if the cell is blank or not, but what I want to do now is change the cell that is referenced in the formula based on the date. Here is the format of the spreadsheet I'm working with:
A
B
C
D
E
F
G
H
[code].....
In this case, the "Team 1" and "Team 2" and "Team 3" references what team they are on that month. If it is blank, they aren't with the company any longer. The formula I am using is intended to import this data elsewhere, and is formatted like this:
=IF(ISBLANK(B2), "", A2) - My understanding is that this checks to see if B2 has data, and if it does, it inputs the employee name (A3) in that cell.
My ultimate goal is to be able to change the column referenced after the "isblank" calculation based on the date. So if today is April 2013, I want it to check B2, but if it's December 2013, I want the formula to check J2. Is there a way to do this? I don't mind if it's two steps (like if I have to put the date somewhere in the spreadsheet in order to run the calculation), but ultimately it would be the type of thing I could do that would leverage the existing data set so that I don't have to maintain two different spreadsheets of information.
I am looking to change to color of an entire row based on the value of a single collumn in that row....Say I have an issue on a line and the "priority collumn is set to high" I would like that entire row to turn red....
View 9 Replies View RelatedI have attached my Excel File with the userform I am trying to do. What I am trying to do is change the table in the listbox based on the selection of the combobox and then my selection in the listbox will pass the selected values to Range A1:C1.
Excel 1.xls
This spreadsheet will be tracking sales and purchases. I want to be able to have any purchases formatted as an expenditure (negative sign or brackets) to show it is money out. Column C "Action" has a drop down with either Buy (infrequent) or Sell. I want to be able to have column I "Unit Price" be a negative number if the corresponding cell in the same row in Column C = "Buy". I do not have these prices formatted as currency as their are 2 different currency used and I don't know how to make the correct currency format appear automatically, though I do have a drop down validation column for which currency the transaction was in, so maybe that is possible. I know this is probably simple, but I don't spend that much time using Excel. I have some sample data in their for the moment.
View 2 Replies View RelatedI want to take what is in column A and replace the number after the "=" with new number.
I need a formula that identifies the 6 numbers or letters after the = and replaces with column A
111111 showstocknumnber//details.php?vid=111111
222222 showstocknumnber//details.php?vid=111111
345673 showstocknumnber//details.php?vid=111111
The 111111 after the = could be any string of 6 letters and numbers. The contents of column b are a URL.
I have this macro below and would like the code changed to find the "Customer Number" column by name rather than by column B. Note that the "Customer Number" column will always be somewhere in row 1.
View 12 Replies View RelatedI am a new member, with not a lot of VBA experience. Sorry for the vague title .. couldn't come up with something ^^". The idea is, I made an list with several anime titles I am watching (in column A) In column G it shows the status; "Watching", "Completed", "Planning to Watch", "On-Hold" or "Dropped". I managed to let the colors of those words change with this
View 4 Replies View RelatedI have this code below that deletes any single occurrence of a customer number but the "Customer Numbers" must be in column A.
I would like to change the code below to instead look for the "Customer Number" column by name, rather than by column A. My "Customer Number" column will always be in row 1, but yet, it will be in a different column letter every time I run the report.
I need code to change a letter such as A into a column number i.e 1. Everything i can find is to do with changing column numbers into letters, surely you can do it the other weay round aswell? So when the macro is given the letter AA it returns the column number as 27 etc, but i need it as a defined variable such as "i = column number" so i can use this information further on in my code.
View 2 Replies View RelatedI am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
If I have a table as noted below with the following assumptions:
- this table will likely grow
- the 'Include' column data will change based on external criteria/formulas, so the 'Include' column will not be sorted.
- Macros aren't an option as this sheet needs to be macro free.
A
B
C
1
Item
Calories
Include
[Code]...
How do I build a formula that I can place in a data validation drop down to only include 'Item's that have Yes indicated in the 'Include' column?
I've been researching this and found answers if the 'Include' column was sorted via offset, but I haven't found any to sift through when unsorted. I feel like there is a simple answer to this that I am missing. Here is the sheet --> ExampleSheet.xlsx
I'm trying to write a code that calculates 2nd column based on 3rd column's number or vice versa based on the condition set on the 1st column. Below, there are two procedures. "SimpleCalc" and "SimpleCalc2". I first wrote SimpleCalc2, but it isn't working, so I worked around the error by writing SimpleCalc, which selects a cell and moves around by offset. I personally find it hard to read and error prone as I develop more logic around it.
I'm trying to develop more function based on this code, so I need to make it neat and flexible. what I'm doing wrong in SimpleCalc2? Or do you have any suggestion to improve the code "SimpleCalc"? I'm using Excel 2003.
Sub SimpleCalc()
Dim SimpleMethodRng, SimpleMethod As String, i As Integer
ActiveWorkbook.Worksheets("Dashboard").Range("P5").Select
SimpleMethodRng = ActiveWorkbook.Worksheets("Dashboard").Range("N5:P12")
For i = 1 To 8
SimpleMethod = SimpleMethodRng(i, 1).........
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
Autofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
This is what I imagine.
A1 "Alfiero", B1 "GenoMap1"
A2 "Alfiero", B2 "GenoMap1"
A3 "Alfiero", B3 "GenoMap1"
A4 "Allocati", B4 "GenoMap2"
A5 "Amaranto", B5 "GenoMap3"
A6 "Amaranto", B6 "GenoMap3"
A7 "Amaranto", B7 "GenoMap3"
A8 "Ambrosiano", B8 "GenoMap4"
A9 "Ambrosiano", B9 "GenoMap4"
A10 "Ambrosiano", B10 "GenoMap4"
A11 "Ambrosiano", B11 "GenoMap4"
I listed examples above of GenoMaps higher than 10 and 100 to show how I need them numbered.
I'm using MS Excel 2007 in Windows 7.
How would I count unique dates associated with another specific value on a worksheet?
For instance, Lets say I want to count each day a particular person makes a sale.
Example:
Sales PersonSale IDSales Date
Don 1001/6/2014
Don 1401/7/2014
Don 1601/8/2014
Jack 1011/6/2014
Jack 1021/6/2014
Mike 901/5/2014
Mike 1031/6/2014
So on another worksheet, I'd have:
Sales Person Days with Sale
Don 3
Jack 1
Mike 2
The Formula would go into the "Days with Sale" Column.
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
AB
1-May
1-May777
1-May
1-May
1-May
2-May999
3-May
2-May
1-May
2-May111
1-May
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
I have a worksheet (Sheet1) that is constantly growing with information. I have several categories under the "Category" column and then the various amounts under "Amount" column. I would like to have Sheet2 be able to keep a running total of the "Amount" column for each category as it increases in entries. I've attached an example sheet.
Example.xlsx
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I have a pivot that includes customer data and I need to create an average for each row based on the first populated column for each customer. After one month of units appears for the customer, I need to calculate the average going forward, and if there are blanks after that they should be treated as 0 in the average. Below is an example of my description of the pivot.
Jan Feb Mar Apr
Customer #1 1 1 3
Customer #2 1 3
Customer #3 2 2
So, the average for customer #1 would be calculated from Column B to Column E, and factor column D as a 0 in that calculation. Customer 2's average would start in Column C and go to Column E, and factor column E as a 0 in that calculation. Customer 3's average would start in column D to column E.
I have data like this,
Member
chr
location
web
1
50000
[Code]....
Now i want to select member column values based on the differences in values between members of location column should be 50000, it means if select web then my next selection should be SEB because next value (i.e web + 50000) is 100000 and it is matching to SEB in members column.
expected results
web
1
50000
[Code]....