Change Names Of Modules. Module1 Etc
Sep 28, 2006Is there a way to change modules' names iso module1 give a real name?
View 2 Replies
ADVERTISEMENT
VBA - Call Macros With Varying Names And On Varying Modules
Oct 2, 2013I want to call a macro with a varying name that is within a module with the same name.
I have a module called Test1 and within this, a macro name called test1
I have a module called Test2 and within this, a macro name called test2
etc
On another module called Test8 (with the macro called Test8), this Test8 macro will call either Test1 or Test2 or Test3 etc depending on what I choose in an excel spreadsheet. So on sheet1, cell A1, there is a drop down with the options Test1 or Test2 or Test3 etc.
The following works to run the macro test1 from module test1 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test1.Test1
End Sub
The following works to run the macro test2 from module test2 (when it does not vary i.e. i physically put in the name of the macro myself):
Sub Test3()
Test2.Test2
End Sub
etc
However, if I try it so that the calling of the macro varies as below , it does not work:
Sub Test3()
MacroToCall = Sheets("Sheet1").Range("A1").Value
MacroToCall.MacroToCall
End Sub
How To Get Listbox List From Form To Module1
Feb 20, 2012I created a nice list box where the user can select any members of a ListBox1, and put them into a ListBox2. This happens in a Form I created, UserForm1.
Now I can't figure out how to get this ListBox2.list from Userform1 into my code in Module1! Any reference to ListBox2 in Module1 results in an error like "Run-time error '424': Object required.
Using Call Module1.Offset = Debug Error
Sep 25, 2009I created a long macro as follows with 2 Select Case structures and the macro works fine.
View 14 Replies View RelatedChange First And Last Names?
Jul 11, 2013In Column B I have a list of names separated by a comma in the following format: Doe, John. I need to have the format: John, Doe or John Doe. I could also move the last name to Column C if that would be easier. (ie. B1=John C1=Doe). I have tried a couple of examples from other places but they weren't what I needed.
View 5 Replies View RelatedChange Sheet Names
Feb 22, 2010I have got a workbook with about 200 sheets... Sheet1 > Sheet200
i need to delete about 100 sheets... sheet100 > sheet200
i then need to add the sheets back in but when i do the sheet numbers start from Sheet201... how do i get it to start from Sheet101 again or can i use some vba to change them later?
Change Names Of Directories
Nov 8, 2007I have a folder structure like ex this c:my folders. Under this folder i have several folders and subfolders. I would like to use a macro to run through all this folders an sub folders and change the name of the first letters of all folders.
Ex
LOP-100-APPL
LOP-200-ORG
I would like to change LOP to PLP instead. I'm lazy and looking for a method for not doing this job manually. This should be done from the excel workbook.
Can I Change Column Header Names
Jun 23, 2005Can I change Coulmn Header Names... What I mean to say that , We Have Generally Column Names A, B, C, D, ... I would like to Change these names what ever I Want..
View 11 Replies View RelatedChange Multiple Chart Names
Jun 27, 2008I'm making a template that will title my charts, and I want to cycle through all the charts and apply names to them (the names for each chart will be stored in a particular cell...). I recorded a macro to see how to access a particular chart, so I clicked record, selected a chart, then selected the next chart. Excel tells me that what I did was
ActiveSheet.ChartObjects("Chart 1027").Activate
ActiveSheet.ChartObjects("Chart 1033").Activate
I want to give the charts meaningful, sequenced names so that I can cycle through them in VBA, so my question is: how do I access/change "chart 1027" and "chart1033?"
Hyperlink Won't Keep Reference When Sheet Names Change?
Apr 30, 2014VB:
Sub RenameTabs()
For i = 1 To Sheets.Count
If Worksheets(i).Range("C1").Value <> "" Then
Sheets(i).Name = Worksheets(i).Range("C1").Value
End If
Next
End Sub
I change my tab names with the above but than my hyperlinks breaks.
VBA - Change Sheet Names Based On List
Sep 19, 2013 I have created 70 "templates" in my workbook. I would like to change the name of each template to the name contained on a list in the "Data" sheet. The list starts at a4, and may have 70 or more names. I want to cycle through each name, place it in cell c8 of the template, rename the template with the same name, then move on to the next name, rename the next template, place name in cell c8, and so forth. So far I have this, which creates the "template" and renames it according to the list, but it doesn't insert the name into cell C8 of each new sheet.
Sub NewSheets()
Dim I As Integer
Dim ws As Worksheet
Dim sh As Worksheet
Set ws = Sheets("Template")
[Code] ........
How To Import All Data In Files In A Directory - File Names Change Each Day
Oct 9, 2008I have a directory where our customer service people deposit forms each day. The form is always the same, with a number of columns that need to be copied into a master list. From there they are analyzed, sorted, etc, then exported, so the number of rows in that list varies from day to day as well. Is there some way to have VBA import each file sequentially from a directory if I do not have the exact file names?
I am using this import code from a macro to start with:
Sub importdata()
' importdata Macro
Range("A2").Select
With ActiveSheet.QueryTables.Add(Connection:=Array(Array( _
"ODBC;DSN=Excel Files;DBQ=C:Documents and SettingsMy DocumentsTender Document(1).xls;DefaultDir=C:Documents a" _
[Code]....
To Import All Data Files In A Directory. File Names Change Each Day
Oct 9, 2008I have a directory where our customer service people deposit forms each day. The form is always the same, with a number of columns that need to be copied into a master list. From there they are analyzed, sorted, etc, then exported, so the number of rows in that list varies from day to day as well. Is there some way to have VBA import each file sequentially from a directory if I do not have the exact file names?
I am using this import code from a macro to start with: .....
Modules In VBA
Feb 26, 2009Can i know how many modules can be used in a VBA Program
View 9 Replies View RelatedClass Modules?
Oct 14, 2008I'm wondering about class modules and what they can be used for etc etc? i want to continue developing my VBA and feel that this area is the next step?
View 2 Replies View RelatedIgnoring 1 Of Two Modules
Jan 28, 2010I have managed to get it almost done with lots of help from here the last issue I have is this:
The module I want transferred is working the assigning of the macro within that module to the button is working, however, when it gets to the FillSalesSheet section it opens the said workbook but then jumps to the module and the FillSalesSheet in that.
Module 1 which I would like ignored on the newly formed workbooks looks like this: ...
Removing Modules
Nov 16, 2006It seems like I am asking a question at least once a day. I searched the net and forums and could not find an answer to this question. Thanks to everyone for the help I am making a lot of progress because all of you. Basically, I have a read-only workbook which the user gets a prompt to save as a new workbook for editing purposes. I have a autorun macro so now when the user opens their workbook, it contains my autorun macro. I do not want this. Is there a way to remove modules so that the users copy has no macro information?
View 9 Replies View RelatedOn Open Run Two Modules
Apr 16, 2008I have two modules I wish to run when I open a workbook. The reason I have them as modules is they are required to be run manually, also.
Is it possible for me to set a Workbook_Open() sub that will run these two modules?
The modules names are Module1 and Module2.
The modules stipulate what sheets etc they have to act on, I only need the modules to be initiated.
Web Queries In Modules
Aug 8, 2006I'm trying to produce a spreadsheet that pulls infomation from different web pages throughout the day. It needs to pull quite a large amount of information from different web pages hence I wanted to produce a subroutine which could be called with different variables for each web page, i.e. url, field, destination, etc.
To actually produce the query I recorded a macro and then used the code it produced. I then changed the URL to url, a string variable which holds the urls of the pages. The destion address was changed to destination, a range variable to store the destionation location, and the webTable was changed to table also a string variable to store the table number. This is shown below.
With ActiveSheet.QueryTables.Add(Connection:= _
url, Destination:= destination)
.Name = "q?s=%5EFTSE&m=L_137"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.BackgroundQuery = True
.RefreshStyle = xlInsertDeleteCells
.SavePassword = False
.SaveData = True
.AdjustColumnWidth = True.............................
Export All Modules
Feb 11, 2008I had a search and look around, but couldn't find any information on how to quickly (automatedly) export all the modules in a workbook to text files.
View 3 Replies View RelatedDelete All Modules
Apr 17, 2008I was looking for code that actually deletes ALL modules in the VBA code after I terminate a particular program.
View 2 Replies View RelatedKeeping Last Row Variable Across Modules?
Jun 11, 2014I'm trying to make it so that a lastrow I defined in one module will still be defined in another macro.
My background for this - my macro is too large for one module, therefore, I split it in two. However, the new module uses defined variables (multiple lastrow definitions) from the original module.
So, is there a way to make it so when I originally define a lastrow in one module, other modules will recognize it?
Call Modules From Array?
Sep 14, 2012I have a number of modules that I want to call is it possible to call them from an array
For example
myarray = Array("Outstanding_Per_Agent", "Unique_Records")
Call myarray
This doesn't work as it says it expects a sub function or property
Do I need to define "myarray" as something or is it even possible.
How To Dim A Response (from Input Box) Throughout Different Modules
Jan 21, 2014I'm working with a substantial amount of code (which, due to its size, has been spread out into different modules). Whenever I transition from one module to the other, I have placed a msg at the beginning of each module to prompt the user to simply insert an integer to signify which version of the automation that is run. The following is an excerpt of a sample msg
[CODE]
Dim Msg, Title As String
Dim MyInput As Integer
' Define message."
[Code].....
Where, whatever report is being run, will be the same throughout all of the modules (for example, if you run the "Day" Report" at the beginning, the rest of the automation should be run using the "Day Report" code, not the "Night Report").
Is there a way to do one of the following
1. Label the input of "Day Report" or "Night Report" at the beginning of the automation (where the above except of code is how that would be done), and that can then be the determinant through the rest of the modules
2. Set my code in a specific module to, when it completes, automatically go to the same style of report (Day or Night) in the next module.
Running Modules Together On Same Worksheet
May 25, 2014Can you run 2 modules at the same time on the same worksheet.
View 2 Replies View RelatedDelete Multiple Modules
Sep 29, 2007I have successfully rewritten all code in one workbook project. I have cut my Standard modules from 17 to just 4 modules.
Is there a way to remove all 17 modules at once so I can replace them with the 4 new ones?
I know that right clicking on the module and then click on "Remove...." will do it, but I would have to do that 17 times.
Not too bad if this was just one workbook to do. I have about 10 other books to do the same thing to. So that would be doing the right click 170 times.
I'm not even sure if this is possible. And if it is, I was thinking at probably having the code in a workbook open event to delete the Standard Modules??? Then I could just import the new modules.
Vba: Difference Between Sheet And Modules
Aug 12, 2008If I put:
Sub t1()
Worksheets("sheet1").Cells(1, 1).Value = "abc"
End Sub
on sheet1, it works. But if I put it on module1, then it does not work. What do I miss here?
Pass Variable Between Modules
Dec 11, 2009I created the following sub to signal when a macro in Module 1 is complete:
Public Sub Done()
Dim complete As Boolean
complete = True
End Sub
I placed this just before the end sub in the macro for which I am trying to detect that it has finished executing:
Call Done
End Sub
In the Sheet 1 Module, the code fails at the statement:
If complete = True Then
The error returned is "Variable not defined." All three subs are declared as Public. Why does the Sheet1 sub not recognize the variable "complete" from the Module 1 macro?
Range As Variable For Use Between Modules
Sep 11, 2008I want to set a variable for the range I want to copy so that the range can change between modules Sometimes I want to copy a1:x1 and Sometimes I want to copy a1:m1 what I did but it did not work
Dim myrange As range
myrange = a1:x1
range myrange.select
Selection.Copy
Protect VBA Modules & Code
May 18, 2009I would like to protect the VBA modules I have written in a spreadsheet. Is there any way of password protecting these (as there is with Excel workbooks/worksheets) -such that users can not see the VBA code unless they enter a password?
View 4 Replies View Related
