Using Call Module1.Offset = Debug Error
Sep 25, 2009I created a long macro as follows with 2 Select Case structures and the macro works fine.
View 14 Replies
ADVERTISEMENT
Debug Error 13
Jun 22, 2009I have a working Excel 2007 macro that accesses two worksheets. I then added a third worksheet and want to access it from the macro. I get a debug error 13 Type Mismatch when the macro tries to access the third worksheet. I know I need to add the third worksheet on a pop-up but I don't remember how to open it.
View 14 Replies View RelatedError In Runtime First Go, No Error In Debug Or Second Go
Jul 6, 2006The code thats generating the error is the following:
For Y = 8 To 131
TmpDate = Empty
Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
TmpDate = Range("A1").Value
For Langd = 1 To Len(TmpDate)
TmpChar = Mid(TmpDate, Langd, 1)
If Not TmpChar = " " Then
TmpComp = TmpComp + TmpChar
End If
Next Langd
TmpDate = TmpComp
TmpComp = Empty
If Len(Dag) = 1 Then
Dag = "0" + CStr(Dag)
End If
Macro continues before the Next-statement...
(it might not be good programming, but I think it should work).
A little explanation to the code.
I have a spreadsheet located on the intranet that has values I need in my spreadsheet. These figures are sorted by date, so I search for the date to find the right figures.
The line Range("A1").Value = "=" + Path + Sheet + "B" + CStr(Y)
works prefectly. I can see the value in my spreadsheet in the cell A1. its the next line that causes the error "Type mismatch".
The value I get from the intranet spreadsheet looks similar to this:
"1 Jul 2006 " (note all the spaces).
What I do is just run it through a loop and cut of all spaces so it will look like this: "1Jul2006" to be sure I dont miss a space or anything.
Now to the funny part.
The error only happens at runtime on the first go.
If I chose to END the macro then and there, and then run it again from the top it works perfectly.
If I set a stopsign to debug the code, it works perfectly on the first go too.
Can anyone explain to me why that happens??
I know enough about programming to handle my syntax errors and so on, but I cant see anything wrong in this one...
Please note that this isnt the the entire code.
I'm building a report on 12 diffrent spreadsheet. The main macro is almost 2000 rows of code, and it call other Subs too (because of limitations in the VBA-editor. A macro cant to be too big), so its impossible for me to post the entire macro...
Worksheet Before Save - Getting Debug Error?
Feb 12, 2014I am trying to take the template I have created and after the information is entered, if all required is not filled in, it will highlight the cells that need filled in. I get a debug error on
VB:
Cell.Interior.ColorIndex = 6
And the file does not save elsewhere. It goes into never never land. Here is my whole code:
VB:
Option Explicit
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Dim Start As Boolean
[Code]....
Selecting Variable Worksheets - Debug Error
Mar 19, 2012I have below code which I was thinking is very simple to select variable worksheets. However I get Debug error when running:
Code:
Dim rng As Range
Dim cl
Set rng = Sheets("Budgetted sku's").Range("A2:A24")
For Each cl In rng
Sheets(cl.Value).Select
Next cl
Pasting Data Debug Error On A Sheet With Borders
May 1, 2009I have code that selects and copies data from one sheet onto another sheet. the sheet that is getting data copied too has borders defined. When i run the code i get a debug error. Here is the issue.... when i remove all the borders it works fine. I have tried everything i can think of to solve the problem but have had no luck. anybody have an idea what is causing this. i attached the workbook file so you can see what is going on.
View 2 Replies View RelatedRemove References Programmatically & How To Prevent Debug Error
Jun 19, 2009i m working on an excel 2007 workbook with ms project functionality. in order to be able to use ms project from within excel i m using early binding. for those who dont know what early binding is: http://www.dicks-clicks.com/excel/olBinding.htm
this works fine if the user has ms project installed on his/her pc.
if the user does not have ms project installed i remove the broken references. this works fine.
but my problem is that when i remove the reference to ms project, my vba project will not compile correctly. thus each time when a user opens the workbook the user gets a "compile error in hidden module" , since the functions of ms project are not available.
for example i get a compile error in the following source
Public Function getResID(ResName As String, ActiveProject As Project) As Integer
Dim res As Resource
For Each res In ActiveProject.Resources
If res.name = ResName Then
getResID = res.ID
Exit Function
End If
getResID = -1
Next
End Function
i just want to know what i can do to prevent the compile error? would the use of late binding remove the problem? actually i dont want to use late binding since my source code is already very complex and it would be a huge effort to change it.
How To Get Listbox List From Form To Module1
Feb 20, 2012I created a nice list box where the user can select any members of a ListBox1, and put them into a ListBox2. This happens in a Form I created, UserForm1.
Now I can't figure out how to get this ListBox2.list from Userform1 into my code in Module1! Any reference to ListBox2 in Module1 results in an error like "Run-time error '424': Object required.
Change Names Of Modules. Module1 Etc
Sep 28, 2006Is there a way to change modules' names iso module1 give a real name?
View 2 Replies View RelatedCall Private Sub Undefined Error
Jul 25, 2006I have a Private button sub in Sheet2. I use it to call a sub in Module1. Like this:
Private Sub button_Click()
Call MacroModule
End Sub
It works when the sub in the module ("MacroModule") is declared as a normal sub.
But I want to declare it as a Private sub so it does not show up on the macro list.
When I change the Macromodule to a private sub, the call gives an error saying sub is undefined.
Code "debug" Error 13
May 29, 2009The two code extracts below are associated with two separate worksheets in the same workbook. They work fine. They simply are used to assign either a PO# or a Temp Unit #, located in a third sheet, in their respective sheets.
The problem is that when I'm in either the Master or the Work Orders sheets where these two codes are used, and I do something simple like drag down some values or paste something in a cell, I get the "Run time error "13" type mismatch error" in the popup debug window for my VBA code. And in each case, it highlights the codeline I've color coded below:
Using Shape To Call Macro (Filepath Error)
Apr 9, 2014I am changing command buttons over to shapes for aesthetic purposes. I went to assign a macro to call useform4 using a rectangle with the following code:
[Code] .....
It throws me some kind of file path error which makes no sense. Do I have to dim the rectangle2 for active sheet or something?
Compile Error: = Expected After Function Call
Dec 18, 2006i'm trying to call a function from another one, i'm getting this error 'Compiler error: = expected' but i don't know the reason, the functions simply take some values an store them in an here is the
Dim productos(19, 3) As String
Sub agregarProducto(ByVal descripcion As String, ByVal modelo As String, _
ByVal precio As String, ByVal unidad As String)
Dim r As Integer
For r = 0 To 19
If productos(r, 0) = "" Then
productos(r, 0) = descripcion
productos(r, 1) = modelo
productos(r, 2) = precio
productos(r, 3) = unidad
End If
Next
End Sub
Sub agregarProductoTelas()
Dim descripcion, modelo, precio, unidad As String
If Selection.Column = 1 Then
descripcion = Selection. Offset(0, 0).Value
modelo = Selection.Offset(0, 0).Value
precio = Selection.Offset(0, 3).Value
unidad = Selection.Offset(0, 2).Value
agregarProducto(descripcion, modelo, precio, unidad) 'error happens right here
MsgBox (descripcion)...
Run-time Error '5' Invalid Procedure Call (CommandBars)
Nov 13, 2009I create and load a commandbar, prior to loading it I attempt to check if it exists, then delete it, and recreate.
I dont understand why this seemed to work for months and now creates an error.
It appears that every now and then the created commandbar is not created when I open a file. Thats when the error pops up. I can manually run the Create_Bar sub and it will be fine, for a while.
Run-time error '5':
Invalid procedure call or argument
This section is in my personal.xls file in "ThisWorkBook" of personal.xls.
Runtime Error - Invalid Procedure Call Or Argument
Jun 24, 2014Code:
Dim LR As Long Dim Dash As Long, _
Whole As Double
Dim pi ', WorkSheets, Range
WorkSheets("Sheet3").Select
LR = Sheets("Sheet3").Cells(Rows.Count, "A").End(xlUp).Row
[Code] .........
Control Button Error :: Suppose To Call A Userform
Dec 27, 2007I have a control button on a worksheet that is suppose to call a userform. I am using the code
Frm_Customs.show
But I keep getting an error. The button was created from the control toolbox.
Offset Error 1004
Jun 20, 2006why the following code would error out in line 2 on one workbook but not another? I copied the one line, then the two and then the entire code from one workbook to another. It works in one, but not in the other. (Error 1004)
Dim FirstBlank As Range
Set FirstBlank = Range("A5").End(xlDown).Offset(1, 0)
Range Offset Error 1004
Feb 2, 2009I am using the following macro to format a sheet - I recently added a auto-fill part to it which essentially moves a number from one column to another and autofills it in all the cells until it encounters another number of the same kind in the column it moved the previous number from.
When I try to run this macro it does everything upto the auto-fill part and then gives me error 1004 [the set cell = cell.offset(1,0) ] is highlighted in yellow.
Error On Linked Cells That Have OFFSET And VLOOKUP Formulas
Aug 7, 2012Read about the Dfunctions and SUMIFS/COUNTIFS not working between linked objects and think my error is the same.
SYMPTOMS: Formulas wont work unless linked workbooks are open. Once open they work and as soon as the sheet is altered after they are closed, they links break.
My formula =OFFSET(('Linked Workbook'!$A$1),0,VLOOKUP(Range,RangeData,2,0)-1) or go to workbook and bring back a certain amount of cells to the right of A$1$ based on a lookup formula in the Main open workbook.
Lookup Function Call: Vlookup Call In Sheet
May 21, 2006I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
Application-defined Or Object-defined Error :: Range & Offset
Feb 26, 2009this is the line it gives the error on.
Range("A1").End(xlDown).Offset(1,0).Select
If Then = Debug
Sep 23, 2009Why does this give me a debug error?
View 4 Replies View RelatedUsing OFFSET Function To Return The Value From Another Cell With Row And Column Offset
May 31, 2014I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
Two Different Passwords Without Debug
May 9, 2008I have a problem with a HUGE macro project I'm working on. The macro itself isn't huge, but it's being applied to about 10,000 files. The macro is updating information on three spreadsheets in each workbook, but the problem is that the password protection (and Macro in general) fails to unlock when the password was entered in UPPERCASE. So the password is "king" and/or "KING" depending on the sheet. There is no way of predicting which sheets will be caps and which will not, but it's frustrating when my macro stops every 5 files with an error because of a wrong password (even though it's always one of those two).
Is there an IF THEN statement or something that I can do so that the macro doesn't stall every 30 seconds to 2 minutes... I have 10,000 files to crawl through.
Debug Statement
Dec 5, 2008I am trying to put together an automation. I am having problem debuging the code. I am trying to have the automation autofilter with "Interior" and "Exterior" at column P. I am using a statement as follow to pick the cell that is showing at at second row each time after the autofilter ran. (the first row of Exterior and Interior are different) However, when i pick Exterior, the automation was able to locate the second cell after picking Exterior, but when I try Interior, then i will have a debug meesage.
Range("Q2:Q" & Cells(Rows.Count, 1).End(xlUp).Row).SpecialCells(12)(1).Select
The code that I used is as follow:
Sub Macro4()
Range("L1").Activate
Selection.AutoFilter
' Selection.AutoFilter
Selection.AutoFilter Field:=15, Criteria1:="=*Fixture*", Operator:=xlAnd
Selection.AutoFilter Field:=16, Criteria1:="="
Range("P2:P" & Cells(Rows.Count, 1).End(xlUp).Row).SpecialCells(12)(1).Select
ActiveCell.FormulaR1C1 = _
Debug :: I Get: Division By Zero
Dec 15, 2009When I debug this script I get: division by zero!
In 3 lines over the debugging line, the script are writing out the variable "prosentref" as 1. Whatt can be wrong?
(the value in cell T8769 is 1)
Option Explicit
Sub optimaliseringDrift()
Dim Pgm1 As Integer
Dim Pgm2 As Integer
Dim PL As Integer
Dim lamda_gm1 As Double
Dim lamda_gm2 As Double
Dim deriv1 As Double
Dim deriv2 As Double
Const Pgm1_max As Integer = 200
Const Pgm2_max As Integer = 300
Const Pgm1_min As Integer = 45
Const Pgm2_min As Integer = 40
Const deltaP As Integer = 5
Find Value, Offset & Return Offset To TextBox
Nov 1, 2006- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31
Debug: Subscript Out Of Range?
May 29, 2009trying to copy some records across from once sheet to another?
butt it keeps debugging?
any idea why.
i'd like to keep the user defined type because it's neat and is good practice for myself?
Customizing Debug Pop Up Window
Aug 23, 2006If a user decides to hit the esc key right in the middle of one of my procedures (bug free, etc), this will leave the file in an odd state. The file is set up so if the routine is re-run it cleans the file up and restores it to proper form.
But hitting esc exposes my code which is password protected when the file is idle. I employ a little trick that makes it hard to hack into my worksheet code, but one achilles heel is the esc button.
What I want is to have the file close if the routine is stopped in mid stream. This way the code is not exposed, and the user cannot monkey with the file.
I wanted to set the file up where i have a custom debug window that when a button is pressd the file closes OR when the user escapes out of the debug window the file closes as well.
Find Function Debug
Feb 15, 2007What I'm doing in this script is taking a whole bunch of variables and pasting them into a seperate sheet "Checks" which will construct a cashiers check. The problem is where I've highlighted the code in red. At that point I have copied the Vendor name to the clipboard - I then go to the "Vendor Info" page and search for that Vendor name. If that name exists on the page it works perfectly...moving one column to the right, grabbing the Address Line 1 and dropping it into the check, then going back and grabbing the Address Line 2 and dropping it into the check. The problem is when that Vendor name doesn't exist in the "Vendor Info" page...I want it to just paste two blank cells into the check (because I obviously don't have the address info for that Vendor)...but instead it gives me an error:
Run-Time error '91':
Object variable or With block variable not set
Sub Checks()
'
' Checks Macro
' Macro recorded 2/14/2007 by Derek Minner
'
' Keyboard Shortcut: Ctrl+Shift+P
'
Selection.Copy
Sheets("Checks").Select
Range("I4").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
