I created a nice list box where the user can select any members of a ListBox1, and put them into a ListBox2. This happens in a Form I created, UserForm1.
Now I can't figure out how to get this ListBox2.list from Userform1 into my code in Module1! Any reference to ListBox2 in Module1 results in an error like "Run-time error '424': Object required.
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
Is there a way to change modules' names iso module1 give a real name?
View 2 Replies View RelatedI created a long macro as follows with 2 Select Case structures and the macro works fine.
View 14 Replies View Relatedi have a form control listbox (list box 5), it is multi select, i need to create a for next statement that loops through the list in and tells me which "row numbers" as it were are selected. i.e if the 1st and 3rd ones are blue, it returns 1,3 in a cell? (lets say cell A1).
View 2 Replies View RelatedI'm writing a audit trail that when the user changes a cell in a specified column the reason for the change gets recorded in a different sheet. If however the list box is cancelled then the cell should not change.
The code should do the following:call listbox when cell value change
user selects one or more reasons from list
if nothing selected then prompt for selection
record username, date, cell value and reasons
if click cancel then undo change, i.e. don't allow user to change the cell without selecting a reason
Steps 1-4 works well
Step5: cancel undo the cell change, but doesn't unlaod the form and hence the load-unload goes into a loop.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 15 Then
Call Launch(Target)
End If
End Sub
Module
Global reasons As String
Sub Launch(tRange As Range)
Dim prodId As String...............
I'm playing with simple UserForms to get the hang of VBA. I was trying an example for the help files (Using xl2K), and this isn't working. My first challenge was figuring out that I needed to 'create' a UserForm to begin with.
View 2 Replies View RelatedHere is what I'm trying to do:
On load of userform:
- vba scans sheet and determines what rows are not hidden
- vba updates listbox to show non hidden rows with multiple columns
I have a userform running with a number of text boxes, as well as one listbox. To extract a value from a text box I obviously write something = me.textbox.value. How do I do the same for a listbox (single item) as me.listbox.value produces an error!
View 1 Replies View RelatedUsing VBA, does anyone know how I can change what is selected in a listbox that is a form control on a worksheet, not on a userform?
View 5 Replies View RelatedI have a listbox control on a User Form. The properties are set as follows: MultiSelect: 1-fmMultiSelectMulti; ListStyle: 1-fmListStyleOption. With these properties the user selects multiple items from the listbox by clicking checkboxes that appear to the left of each option. Once items are selected the user clicks a command button on the User Form and the selected items are placed in a single cell on an excel worksheet. The excel worksheet contains an excel list of records. The records on the worksheet can be edited or added.
Let’s focus only on the MultiSelect listbox. A single item is selected from the listbox and is applied to cell G2 as CRUSHING. On the next record two options were selected. These items were added to cell G3 as CRUSHING; SHEAR. The next record had three items added to cell G4 as SHEAR; LATERAL BENDING; FLEXION. As you can see from the above example multiple items are added with the item name followed by a semicolon space and then the next item name. The user form contains command Buttons that allow the user to move to the NEXT, PREV, FIRST, LAST, ADD, and EDIT records.
Here is my problem:
I can check multiple items and have them added to a single cell of the current record on the worksheet. My problem is how to reverse this process. I need to move back to a previous record and have the User Form appear with the check boxes of the currently selected record.
I have created a user form with a multiselect listbox. The user form displays a checkbox to the left of each ListBox item that can be selected. Once selected the user clicks the SAVE button on the user form and the results are stored in a single cell on an excel workbook. The user form contains several other buttons that allow the user to view the NEXT and PREV records stored on the excel worksheet. If a checkmark is placed next to the option Shear and the Save button clicked, the word Shear would be recorded in the 7th column, current row of the worksheet. If the user checks several boxes like: Flexion and Lateral Bending, the 7th column of that row would store Flexion; Lateral Bending. The macro inserts a semicolon space between multiple selected items.
When the user clicks the PREV or NEXT button on the user form to go an existing record I am having difficulty getting the correct checkboxes to be selected to reflect the contents of the 7th column, current row. The ListBox control is named GeneralInjuryMechanisms. The code that I currently have for this section of the macro is as follows:
Dim strInput As String, strOutput As String
Dim varZz As Varient, i As Integer
GeneralInjuryMechanisms.Clear 'Clear the existing ListBox options
AddRegionalMechanisms 'Recreate ListBox options based on current record in column 7
strInput = Cells(r, 7).Value ' i.e. cell on worksheet with Flexion; Lateral Bending
varZz = Split(strInput, "; ") 'create array of values using "; " as delimiter.
For i = LBound(varZz) To UBound(varZz) ' loop through values...................
Allow a user to make multiple choices from a user form listbox populated from a named range (LIST), that when checked and the submit button is clicked would add TRUE to column A in the same row for each selected item. Then when the user opens the form again - for each row where there is TRUE in column A, the check box on the form would be checked and if the user then removed the check and clicked submit, TRUE would be removed from column A that was associated with that item/row on the worksheet.
View 6 Replies View RelatedUsing the Roy Cox Database code http://www.excel-it.com/vba_examples.htm , I am trying to populate a user form when the user selects a list row. I don't know if this is important, but I have extended my list beyond 10 columns. The list appears in UserForm2, and it should populate UserForm1. UserForm1 is also available to fill in from scratch; the info pulled from UserForm2 is from a search.
Here is my problem:
UserForm1 does not populate with the current selection, but rather the previous selection. It will appear blank upon the first selection. If I close UserForm2 after getting a blank on Form1 and call UserForm1 from its own macro, I will also see that previous selection.
I have a ComboBox(mnthComboBox) on a userform. I would like to populate the RowSource using VBA Code. I have searched this forum but have been unable to find what I need.
View 4 Replies View RelatedI have been able to create a userform that allows users to fill out a form without the need to navigate throught the excel spreadsheet form that has been created. to further refine this I am trying to use either a list box or Combobox to display specific items for certain cells, ie Travel Method (Air / Rail / Other), or Department (Projects / Finance / Engineering / Admin etc). I can create these in a spreadsheet without to much problem, but sofar have been unable to get them to work in the user form.
View 2 Replies View RelatedI have one form control listbox in excel. It is with multi selection Is there a way to find the latest selection in the listbox?
View 2 Replies View RelatedI wrote a macro which creates desired output based on one default variables. But I want to change it to take user selected assumptions and perform the macro for each user selected variables.
I am confused with user forms and controls and what to use.
Can anyone give the code to how to add a list box to a userform and then add items to the listbox, and run macro based on thegiven input in the list box?
I have a workbook with about 25 different sheets and each sheet has the same in cell listboxes on them and If I get another item I need to add to them I have to go to each sheet and update them, is there a way to make one list to populate each list from?
View 5 Replies View RelatedI need the listbox to have the related dates to the salesman I am selecting in Combox Not all dates
You can check my Attachment
I have a list of 150 names and I am looking for the best options to select between those. I will generally type part of the name and expect for the closest match to appear.
I have tried listbox userform, it does not work, even though it's locked and formatted not to move, its size changes all the time causing Excel to crash and lost hours of work done on the sheet.
I have tried also a drop down list, but it's very hard to search for names manually.
What other options do I have? I think the best would be some kind of search box but I can't find any in the insert userform tab.
I have a userform and on this userform i populate a listbox with values.
What i want to know is how do i extract ALL the items in the listbox.......not just the ones that are "selected".
I am traying to make a horizontal list on sheet2 from a listbox on a userform ...
View 12 Replies View RelatedI am trying to set the controlscource property for a listbox but i get a "Invalid Property Value" error. I am useing the
ActiveWorkbook. Names.Add Name:="Amm_Edit", RefersToR1C1:="=Developments!R" & (Rynommer + 4) & "C" & Kolomnommer & ":R" & (Rynommer + 33) & "C" & Kolomnommer
ListBox0.ControlSource = "Amm_Edit"
The first line definetly works but the second gives me the error. Why is this?
I want the user to be able to edit some of the data I have in excel. It there some other way around this problem?
I know you can read a range of data into a ListBox with a single command. can you read the contents of a ListBox into an array with a single line, and if so what is the syntax?
View 2 Replies View RelatedI have a form that is built based on the number a person enters. For Example - if the person enters the number 2 then 2 ComboBoxes are entered on the form.
The problem that I am having is that the list is not showing when the form is loaded. In the Project Screen all is OK until the final step when the form is Shown.
I have two groups of data listed in one sheet. I have supplier names down the side and locations across the top, with data filling the respective cells. Refer excel file attached. At the moment I am manually merging the two lists to form one. I am copying both rows of headings and creating one unique row heading list, deleting any duplicates, then cutting and pasting the data under the respective heading. Because I am going to have to do this every month when new data comes in, I want to know whether their is a way to create a macro to automate this process...
View 2 Replies View RelatedIs there anyway to prevent an empty entry from showing up in a list box?
And pending that the above is possible is there a way to exclude the first value a column?
I want all values in column A except A! to display that aren't blank.
I'm afraid I've run into some trouble with the Listbox function, which I really love, but I can't quite get past this hurdle.
I want to have a listbox which populates by checking an entire column for values, ignoring blank cells, and, if value is present, to also check to see if any value is present in the cell one column to the right and one row down from the cell that has the initial value. If both these conditions are true, to then display both values in the Listbox. In other words, the Listbox would contain two columns.
During this routine, when checking value is present in the second cell, I'm guessing that an IF statement would increment a variable signifying the cell reference by + 1 for column and + 1 for the one row down?
I have systems that spit out text log files showing machine performance. Each log file has about 5000 lines of data in it which I import into excel for processing. One of the columns has a machine voltage that changes with the machine state. There might be 10-15 discrete values (like 500V, 800V, or 1000V) within the 5000 lines. I'm trying to populate a list box with just the discrete values so the user can choose what state to process for charting. Some log files might only have 2 or 3 voltages others might have 15 or more so it isnt fixed. I've been trying to use an advanced filter with copy to location and unique records selected but I run into problems with the variable size of the list and with the fact that the header repeats periodically and I can't seem to screen that out of the list.
View 9 Replies View Related