In Column B I have a list of names separated by a comma in the following format: Doe, John. I need to have the format: John, Doe or John Doe. I could also move the last name to Column C if that would be easier. (ie. B1=John C1=Doe). I have tried a couple of examples from other places but they weren't what I needed.
View 5 RepliesI have got a workbook with about 200 sheets... Sheet1 > Sheet200
i need to delete about 100 sheets... sheet100 > sheet200
i then need to add the sheets back in but when i do the sheet numbers start from Sheet201... how do i get it to start from Sheet101 again or can i use some vba to change them later?
I have a folder structure like ex this c:my folders. Under this folder i have several folders and subfolders. I would like to use a macro to run through all this folders an sub folders and change the name of the first letters of all folders.
Ex
LOP-100-APPL
LOP-200-ORG
I would like to change LOP to PLP instead. I'm lazy and looking for a method for not doing this job manually. This should be done from the excel workbook.
Can I change Coulmn Header Names... What I mean to say that , We Have Generally Column Names A, B, C, D, ... I would like to Change these names what ever I Want..
View 11 Replies View RelatedIs there a way to change modules' names iso module1 give a real name?
View 2 Replies View RelatedI'm making a template that will title my charts, and I want to cycle through all the charts and apply names to them (the names for each chart will be stored in a particular cell...). I recorded a macro to see how to access a particular chart, so I clicked record, selected a chart, then selected the next chart. Excel tells me that what I did was
ActiveSheet.ChartObjects("Chart 1027").Activate
ActiveSheet.ChartObjects("Chart 1033").Activate
I want to give the charts meaningful, sequenced names so that I can cycle through them in VBA, so my question is: how do I access/change "chart 1027" and "chart1033?"
VB:
Sub RenameTabs()
For i = 1 To Sheets.Count
If Worksheets(i).Range("C1").Value <> "" Then
Sheets(i).Name = Worksheets(i).Range("C1").Value
End If
Next
End Sub
I change my tab names with the above but than my hyperlinks breaks.
I have created 70 "templates" in my workbook. I would like to change the name of each template to the name contained on a list in the "Data" sheet. The list starts at a4, and may have 70 or more names. I want to cycle through each name, place it in cell c8 of the template, rename the template with the same name, then move on to the next name, rename the next template, place name in cell c8, and so forth. So far I have this, which creates the "template" and renames it according to the list, but it doesn't insert the name into cell C8 of each new sheet.
Sub NewSheets()
Dim I As Integer
Dim ws As Worksheet
Dim sh As Worksheet
Set ws = Sheets("Template")
[Code] ........
I have a directory where our customer service people deposit forms each day. The form is always the same, with a number of columns that need to be copied into a master list. From there they are analyzed, sorted, etc, then exported, so the number of rows in that list varies from day to day as well. Is there some way to have VBA import each file sequentially from a directory if I do not have the exact file names?
I am using this import code from a macro to start with:
Sub importdata()
' importdata Macro
Range("A2").Select
With ActiveSheet.QueryTables.Add(Connection:=Array(Array( _
"ODBC;DSN=Excel Files;DBQ=C:Documents and SettingsMy DocumentsTender Document(1).xls;DefaultDir=C:Documents a" _
[Code]....
I have a directory where our customer service people deposit forms each day. The form is always the same, with a number of columns that need to be copied into a master list. From there they are analyzed, sorted, etc, then exported, so the number of rows in that list varies from day to day as well. Is there some way to have VBA import each file sequentially from a directory if I do not have the exact file names?
I am using this import code from a macro to start with: .....
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies View RelatedI have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.
View 9 Replies View RelatedCan I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedCode:
Sheets(Array("Sheet 1", "Sheet 2")).Visible = False
How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?
Want to ensure my code will work if the user changes the sheet name.
I have a worksheet with many tables that I use in formulas.
I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.
Also, automatic copy of formulas/formatting is great.
But, what I really like about tables is the ability to use the naming conventions in formulas.
Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.
Example:
Code:
=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"
Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
Is it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.
I am using Excel 2003 and Windows XP.
I have been given a list of my firm’s target clients (in excel) and an opportunities report (exported into excel) from our CRM system, which lists all the opportunities (i.e. opportunities to sell/provide products/services) that have been created for each client. Some of the column headings in the opportunities report are as follows:
Client; Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created etc.
What I need to do is lookup each client, from the target clients listing, in the opportunities report to see whether an opportunity has been created; and if so, return the row of values (i.e. the Opportunity ID; Opportunity Name; Opportunity Description; Created by; Date Created) for that client. The result will be placed next to the name of the client in the target client worksheet.
I have a couple of problems. Initially I tried to use the VLOOKUP function to lookup the client name in the opportunities report and return the Opportunity ID (I then planned to use the same formula to return values from the other columns); however, as the client names in the target client listing were not always written the same way as they were in the opportunities report, the formula often returned #N/A. The formula I used was
=VLOOKUP(A8,'Opportunities Report'!A2:F51,2,FALSE)
So for example, the first client that I was looking up was written as “ABC Ltd” but in the opportunities report it was written as “ABC Limited”.
My second problem was that for some clients, there were multiple opportunities listed in the opportunities report. Where this was the case, there was a separate row (repeating the client name in the first column) for each opportunity created. I think that was messing up my VLOOKUP formula as well.
Is there a way to look up the client name, from the target client listing, in the opportunities report even if it’s slightly different and return the row of values for each opportunity created for that client on a separate row?
I have a list of names in a single cell. They are all seperated by a comma, then a space. Example would be: John Smith, Steve Wilson, Wallace O Malley, etc. What formula could I use to pull out the names individually, starting from the farthest right?
View 2 Replies View RelatedI'm trying to sort out a list of names from a website that publishes names in the following format:
DOE John
VAN GOGH Vincent
DA VINCI Leonardo
NADAL PARERA Rafael
JIMENEZ RODRIGUEZ Miguel Angel
What I'd like to do is get the names in the following format
John Doe
Vincent Van Gogh
Leonardo Da Vinci
Rafael Nadal Parera
Miguel Angel Jimenez Rodriguez
Basically all the last names - which are all capitalized - would be moved to the end of the text string. Of course any leading spaces should be removed and I guess using the Proper() function, all capitalized words could be capitalized in a standard way.
I found the following function, here: [URL] ...
but what it does is just take the capitalized words and separate them into a separate cell, which is not all of what I want.
create a script that will replace the names in column A on sheet1 from a Master sheet in the same workbook?
The problem is that different users are entering data on sheet1 col A in different ways example someone may enter Johnc or John C Or John What I want is for something to run down col A on sheet1 and look for the like name on the master sheet if the name matches then do nothing but if the name is like another name on the master sheet then replace the name if they are almost alike.
I need to create a function that selects 4 names randomly from a list of 15 names and displays the 4 randomly selected names in the one cell. Also, you cannot repeat the same name in that cell, (i.e. bob cannot be selected twice in his group of four)
View 1 Replies View RelatedI need to make this macro read FOLDER names instead of FILE names. When I posted this question yesterday to get this macro, I wasn't told that each file in its own folder. I need the folder names now.
_____________________________________
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Ford"
.SearchSubFolders = False
.Filename = "*.*"
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
For i = 1 To .FoundFiles.Count
Cells(i, 1) = .FoundFiles(i)
Next i
Else
Cells(i, 1) = "No files Found"
End If
End With
End Sub
Here's what I'm trying to do:
In a spreadsheet I have a series of names with associated data, for instance: ...
I have a database output file where one of the columns contains managers names, often more than once. I want to apply an autofilter on manager name and then copy the result to another sheet or sheets. My criteria for the autofilter is a variable pointing to a list of names that at present I maintain by hand; a for-each-next loop then cycles through the names.
What I would like to do, before running the autofilter code, is to create the list of names via code. This would then automatically pickup names that are missing.
The code I have so far is below:
Public Sub find_managers()
Dim managers1 As Range
Dim names1 As Range
Dim n1 As Variant
Dim n2 As Variant
In my mind it should check the names in the unique list against the imported list and add any missing names.
I have a column which contains names e.g
Mr D.H.JONES
Mr Derek Harold JONES
I want last name first,then space,the other names. This is because I am using VLOOKUP and the sheet I am looking up has the names in this format.
I have the list below and would like to create a new list which contains only names with corresponding values and lists them.
+ A B
1 James 3
2 Derek
3 Brett 6
4 Allan
5 Jess 7
6 Sam 10
7 frank 10
The solution should look like:
+ A B
1 James 3
2 Brett 6
3 Jess 7
4 Sam 10
5 frank 10
I need to compare two lists of client names. One list has 59k names to be compared to second list of 1000 names.
The list of 59k are listed in column D and the other list is in Column E. I tried conditional formatting but unfortunately some of the names are slightly different I.e. fair point communications vs fair point communications inc. I was trying to put in v lookup with a trim function but it didn't seem to be working.
I have two columns listing about 400 and 500 names respectively.
First Column has names in alphabetical order and the second column is random.
One column has names in this format: Last name, First name
And the other column lists the names as first name and then last name without the comma
I am trying to see if the list of names in one column exists in the other.
Is there a way to see this without changing the format of the names in each column? If so do I have to erase the comma?
Name Lists (1).xlsx
I have a task I would like some assistance with…
I have a work book that I have to copy over 70 times for over 70 work locations. As you can see, this will require different file names for each location.
I would like some have help with a code that I can use. If possialbe I like a code that will make copies of the file renaming each with the names I have on another list. Is this feasible?