I would like to graph the data shown below using a scatter graph. However, when I use the cart wizard it assigns numerical values to each data point and then plots the data accordingly. How can I get the scatter graph to group the assets with the same ratings together? Note, I don't want to have to assign values to assets with the same rating each time. I have attached the spreadsheet so you an see the problem.
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
I need the two x axis to be pressure and solubility and the y axis to be velocity, with the data being demonstrated by a single plot (I have only managed it with two plots which does not demonstrate solubility's relationship to pressure ).
For example at a pressure of 200 PSIA (lower x-axis) and solubility of 0.024 mol % (upper x-axis) velocity was found to be 1 m/s.
I've got two columns of information plotted against one another in an x,y scatter. I need the x-axis to reflect each of the 42 numbers I've added in the column and not a preset or fixed range of numbers. (I need to see the actual number that I assigned each x-plot point on the x-axis and not on the plot point itself).
The attached file has a scatter chart in which all of the data is properly displayed except the X axis. How can I get my X axis to reflect the data I have selected?
Attached is a chart I am trying to create. So basically, I originally used a line chart but it didn't have the flexibility of the scatter chart, but i am having a very hard time formatting the X axis. First of all - I would like the line in the middle at the 0% point to actually go to the bottom so that the x axis labels aren't in the middle of the graph. Second the x axis labels aren't showing up correctly. They should be quarters: 1Q:02, 2Q:02, 3Q:02, 4Q:02... Finally, how can I show the correlation between these two data points plotted - the R-squared. THANKS!!! Auto Merged Post;I actually was able to figure out most of what I asked. What is remaining: how do I calculate the R-Squared on the chart? Isn't there a way to do it automatically in excel on the chart.
We have a special testing machine in the lab I work in, and it measures reflectivity from reflective vests etc. A special instrument takes a reflective reading and reports back a X and Y value which is used then as a co-ordinate and gets plotted on a graph.
The machine measures for 8 colours, and takes four readings, so for example the first color will be Flourescent Yellow. and then it produces 4 "X,Y" readings, which get plotted onto a graph, and joins all 4 points to create a box as shown in the link >> Graph with joined plots
This is a small capture of the spreadsheet with the values >> spreadsheet
Basically, I need to know how to take the values in columns X and Y, and then make it plot onto a graph as one point, and then join the four points for that one colour,
end result being the grapgh will have upto 8 boxes on it.
I am supposed to make an xy scatter graph like the one drawn of paper. The average point need to have a "cross" around it. So far I can just plot the points. I have added the average point as secondary series. I just need to put the "+ sign or cross around" it.
And can create a scatter diagram fine. However, I've been asked if it's possible to show on the graph, for each point a line to it's respective X and Y co-ordinate. For example, for row 4 (in red), on the same scatter graph, I'd like there to be two lines for this point,
Line1 drawn from (0.1, 0) to (0.1, 0.26) and Line2 drawn from (0,0.26) to (0.1,0.26)
I know it's possible to overlap graphs in Excel, but I can't find how to achieve this with scatter plots
how do you create a graph with a field such as vendors on the X-axis, but with dollar values spent on the left side of the y-axis and percentage of total dollars spent on the right side vertical axis?
I have an XY scatter with 40 or so different lines displayed.I want to change the thickness of all of the lines. I dont want to have to try and select them individually and change them. Is there any way to do this? Perhaps changing the default thickness of lines for this type of graph?
I am trying to plot a scattered line graph that contains nearly 4000 points on the y axis. The points represent a day. The x axis is the percentage belonging to that day. The problem that I am having is that the graph looks squashed together and the line is very thick because of this. One of the reasons for this is that a lot of the 4000 points have similar percentages so the line just moves a tiny bit. Is there a way that I can make the graph look more presentable?
The following is a picture of how it looks. You may need to enlarge it to see it properly.
I am reporting on the amount of certificates issued over a period of time. Basically the government stopped released data on the amount of one type of certificate being issued during this period and started releasing data on another type. I am having trouble displaying this other data which starts around half way into the time period. So all the data starts in June 2010... but this other data starts in June 2012.
after spending hours searching the forum, I begin to seriously doubt my ability to even formulate a suitable search question. My problem SHOULD be a known one, but I am unable to find any clues. Here we go:
I have made a pretty stright-forward forecasting model. It is used to calculate economics of a coal fuelled power plant (even though that shouldn't matter). The outcome is, among other things, a single number for Profit / MWh in Euros. There are several input data, such as fuel price, price for CO2 emission rights, operational expenditure, capex, etc.
My idea, then, is to lock all in-data parameters except ONE, then let this variable vary incrementally and then produce a new small table with a) the variable data (example: price for CO2 rights ranging from 10 to 50 Euro in 2 euro steps), and b) the resulting net profit in each case. Ideally, I wish to be able to chose which indata to lock and which to vary, i.e. solution need to have certain flexibility.
NB: The calculations are not that simple, i.e. I cannot use a simple formula - I need to use the exising output cell(s) to feed data.
How do I do this?
The outcome should be basically two rows with a suitable number of columns (or the other way around, two columns in X number of rows). The table will then be used to produce illustrative graphs.
I guess I could hard code a table by simply enter data, but heck, that's not the way to use Excel!
I would like to create a graph where the numbers are grouped in such a way as all numbers between 0 and -1 are shown in one column, all numbers between -1.1 and -2 are shown in the next column, all numbers between -2.1 and 3 are shown in another column etc
I have put my values into a XY scatter graph but need to find the maximum point i.e when the gradient is zero. I am using visual basic to obtain my data and draw my graph.
now i want to make 5 different graphs one per each group. Now i am making them manually in excel but it is taking lot of time to format each graphs to get unique graphs. I am attching sample file and graph for better understanding.
I am trying to add a secondary axis for a graph but it is not displaying as it normally does, instead of the columns remaining side by side they overlap. I don't normally have any issue with this so I'm not sure what I'm doing wrong. I've attached images to show what i mean.
There is probably a really simple solution to this, but I have a column 'A' of data, with various numbers, and a column of data 'B' with letters from A to Z. However when I try and plot this on a scatter graph, the x axis uses numbers rather than letters, with data points all over the place?? I'd like the X axis to have the letters A to Z, and the data to stack up vertically when there is a few different numbers correpdoing to 1 letter. Specifically, a scatter graph
On my graph the bottem axis shows 1-30, I'd like to change this to 30-1 as I track change over the last 30 days. I tried selecting reverse axis but it reverse's the data as well. Is it possible to change the axis text only, eg latest entry will be one and the 30 day old data will be 30.
I'm simply trying to graph my data on a line graph in Excel. see the attached.
The issue is that the spacing on the x-axis is all equivalent. I want the space between the initial and 1st month to be very small while the space between 6 month and 12 month be larger.
So at the end of the day, the line will be kind of crunched down from the beginning and goes up at the 6 month data point.
I have a pivot chart which has one Axis field (Cell Ref2) and one Sum of Values field (which is a table series of percentages calculated from formulas)
I see the graph like I'd expect, but I'm struggling to get it to show percentages rather than basic integer units on the y-axis? Usually I would imagine to just right click on the y-axis : Format Axis, and expect to see something to change the display units, but it is only for hundredths thousands etc rather than a percentage ? The units themselves in the table for that value series are in percentages so I don't see why it isnt showing the percentage units in the first place.