I have a sheet with a fairly large amount of conditional formatting (all the same format, different conditions).
I would like to quickly change all of the (conditional) formats, but leave the conditions as is.
In cell A1 I have revenue projected & B1 I have actual revenue if the date in B1 is less than the date in A1, I would like B1 to change colour.
View 5 Replies View RelatedI have a spreadsheet of stock data open, high, low, close etc., that streams in real time from thompson reuters. i am trying to conditionally format the G column which is the "(HIGH)" price of the day to alert me when the value of that cell changes price. Basically during the first 15 min of trading my software filters down the top performing stocks of the day. During that time i drag and drop the information in the excel program that is linked to the stock quotes program which might give me up to 30 or 40 stocks. The conditional formatting is to alert me after the 15 min mark if the "(HIGH)" value in that column has changed price to a new high. I can control the stream of the data with a button that turns off the data stream so that it only goes live after 15 min.
photo (1).jpg
=$CS18=INDIRECT("Client_Options!"&ADDRESS($I18,97))
I want to say when CS2= same value as CS2 on the client options sheet (on the row specified in I2 sheet 1) change the colour.
How should this be tweaked to do that? I'm not getting it!
=$CS2=INDIRECT("Client_Options!"&ADDRESS($I2,COLUMN()))
I'm trying to make a tracking sheet of upcoming annual inspections for different pieces of equipment. I've already got a column set up listing the inspection due date. Using three conditional formats, the individual cells change color based on the amount of time until the inspection is due (green normally, yellow at 30 days out, red past due).
What I'd like to do is have the entire row of information change color based on the color of the cell the inpection due date is listed in. For ex. J6 lists the inspection date as 24-Feb-07 and is therefore red, I'd like A6-I6 and K6-P6 to change to red as well. And when the inspection is compleate and I manually change J6 to say 25-May-07, I'd like all of row 6 to change green based on the fact that J6 is already going to.
So I am working with a model that calculates IRR, NPV, etc. I need to create a formula for conditional formatting that calls out if the IRR calculation is invalid due to non-normal cash flows. These are cash flows where signs change more than once (eg -100,200,-300).
View 2 Replies View RelatedIn my workbook I have several column with dates, these are benchmarks that I need to follow and have my patient's follow. They concern the dates of treatments and of lab work. My last column is Contact Needed and does not contain any formulas or code. Is there a way to change the color of the row to adjust for how close we are to the treatment date or the lab draw date.
I was thinking if I were +/- 7 days from each blood draw the row would be yellow, so I could contact the patient and remind them to get the labs done. If it was over 7 days past scheduled blood draw, the row would be light red, as the urgency to get labs and continue treatment has increased as they are past due. In like manner, if treatment are within 14 days, the row would be yellow so i could call them and set the appointment. If past the treatment date, the row goes red and I have 14 days to get them in or we have to start treatment s all over again.
Book0.5 template.xlsx
I have one cell (M6) wich will have one of the following values:
Pale Yellow
Yellow
Yellow Orange
Orange
Red Orange
Red
Red Violet
Violet
Blue Violet
Blue
This cell is filled in by a formula.
I would like this cells (M6) color, to change to the approriate color.
I want to change the colour in a cell depending on the sum of two other cells.
ie
A3=1,B3=1
A4=2,B4=1
A5=1,B5=0
A6=2,B6=4
So i want if
A3+B3>2 THEN C3 TO HAVE GREEN COLOUR
A4+B4>2 THEN C4 TO HAVE GREEN COLOUR
A5+B5>2 THEN C5 TO HAVE GREEN COLOUR
A6+B6>2 THEN C6 TO HAVE GREEN COLOUR
SO IN THE END ONLY C4 AND C6 WILL HAVE GREEN COLOUR.
Is there any formula to do so with conditional formatting?
I'm trying to set a conditional formatting to do the following:
If A1 is greater than 1, A2 will change its background colour to green. So the format needs to be in A2.
Basically in A1 is a page number that we have reconciled our bank statement to (labelled as "64" or "65" and so on), A2 has the end of statement amount.
Every month end we do a bank rec, the green cell is a marker to show what point we reconciled up to previous month.
I want to use conditional formatting to change the colour of the entire row when the date on A1 is any date in September (01/09/09 to 30/09/09).
View 10 Replies View RelatedIs it possibe to change another cells color (Fill) based on what is placed in that cell? Example: A1 =if there is an "x" in A2 highlight A1 Green, but I have information in A1 also. Or if I had a different cell say= if there is an X in A1 Highlight A1 Green ect.. This key is to highlight a cell that I have information in based on a different cell having an X in it. If ther eis no X in the cell I have indicated, nothing needs to happen.
View 2 Replies View RelatedI have a spreadsheet where column H can be either yes or no. When column H changes to Yes I want the background of the whole row to change to Red.
e.g. Cell H4 contains the word no. I then change this so that it says "yes". I want the background of row 4 to go red. so A4, b4, c4, d4, e4, h4 all go red.
With the type of conditional formatting i normally do i can only get cell H4 to go Red by putting cell value = yes as the condition. I cant for the life of me think of a formula or way round of doing this.
I'm trying to use conditional formatting to colour the border of a range of cells when another cell has data in it.
I can get it to color all the cells borders within that range when there's data in that cell but I just want the outside of the entire range.
Is there any method to change the placement of conditional formatting icons. By default, the icons appear at leftmost part of the cell. Is there any way the icons appear at the centre with percentages (see attachment).
File: Sales Comparison - New Outlets 2012.xlsx
I’m sure conditional formatting is the way forward with this but can’t quite get the formula right. I need 2 columns: Column A will have dates that an event happened on. Column B will be blank until we have received back in a letter that went out on the date in column A. At which point the date the letter was received back in will be entered into column B
What I need is for the Colour of Column B to change from green (before and on the date of Column A) to Amber (for the next 3 days) and then red (from Day 5 onwards. This would be until a date was entered in column B (the date the letter is received back in) at which point it would just go back to white. This would keep a check on how long the letter was out for and whether we need to chase it up or not and with an increasing urgency.
I would like to be able to put a value into a cell. By doing this I would like another cell next to it to turn a color. With that said, is it also possible to format a cell with several possible scenarios in one formula to be able to change the cell next to it a color?? Example is this lets say Cell B1 could have the letters, A B C D or E entered. So that the Cell A1 turns say the color Red.
View 2 Replies View RelatedIf a cells value is between to numbers then I need to change the color of that specific cell to green otherwise cell is to turn red. Also all cells without a value defaults to yellow.
View 9 Replies View RelatedI am trying to setup a monthly calendar.
What I want to do is have it so that if you type "apples I want some", the cell changes colour to green, and also the apples doesnt appear in the cell. So when you press enter, all you will see is a green cell that says "I want some"
I was wondering if there was a way in VB within the worksheet to make this happen?
Using conditional formatting I can change the font color (to blue) of a cell if it meets a certain criteria. Now what I would like is to display a message when the color changes to blue. The cell range is E26 to E40.
View 9 Replies View RelatedI am trying to do a conditional format of 0 to 2 is red, 3 to 4 is yellow and 5 is green. However I also need to have a cell that is blank to remain white and this is the part I am having problems with.
I found the following code since I cannot use the standard conditional formating in excel since it needs 4 conditions.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("H3:H12")) Is Nothing Then
Select Case Target
Case 0 To 2
icolor = 3
Case 3 To 4
icolor = 6
Case 5
Is there a way I can highlight cells that are differ from their adjacent cells by more than 10%?
Sample case:
Month 01 02 03 04 05 06 07 08 09 10 11 12
Sales 100 112 100 130 140 160 175 200 170 170 140 135
Here, In April, July and August, there is a sharp increase (>10%), while in September and November, there is a steep decline (>10%). I would like to format the sharp increases as Green, while sharp declines as red.
Can I do it using conditional formatting?
I know I can attain this by creating a separate row for Month/Month growth in above example. But this example is a simplified version of my data. Real data is a lot more complex, and I need to do the formatting without creating any additional columns/rows.
I have a simple due date spread sheet for tasks that need completing at work. I am able to make the 'Due date' cell turn red when it is equal to or less than todays date, using conditional formatting. No problem.
I also have a 'Date closed' cell which is populated with a date when the task is complete.
What I am struggling to do however is change the red 'Due Date' cell to Grey once the 'Date Closed' cell is populated with a date. In fact I would like the whole row to be greyed out once the 'Date Closed' cell is populated.
I also have an 'Open / Closed' cell, which tells me if a task is open or closed, being chosen from a drop down I installed. Could this be used as an alternative to the 'Date Closed' cell. ie If someone selects 'Closed' in cell A4 the whole A row goes grey.
Is it possible to change color for arrows icons in CF- icon sets? I would really like to have a five arrows pointing in different directions (all in different colors).
Can I do it in conditional formatting or should I go for "Wingdings" fonts and then change font color?
I have a simple sheet that has columns I-K. My issue is that in column K I am dividing J/I. If both J and I cells have a "0" then I get the #DIV0 error. If both J and I cells are blank then I get the #VALUE! error. I need it so that if the cells in J and I have a zero in them then it places a 0 in K. But if both J and I are blank then it puts something else that I can have Conditional formatting change the font color so column K looks blank. I think the IF formulas I am try to use recognize blank cells as zeros as well.
View 9 Replies View Related Cell B157 is changed by checkbox 1= TRUE, 0 = FALSE
Cell H1 and Cell H2 are percentages changed by the user.
Range(AI8:AQ8,AI12:AQ12,AI16:AQ16,AI20:AQ20, etc) each cell in the range contains a formula, and is protected from the user.
I need the contents of each cell in the range to change font color (independent of each other) when the formula of any of the cells within the range changes - to the following
If B157 = 1
Cells < H1 (a percentage changed by user), would turn Red
Cells > H1 but < H2 (a percentage changed by user) would turn Yellow
Cells > H2 would be Green
If B157 = 0
Cells < H1 (a percentage changed by user), would turn Green
Cells > H1 but < H2 (a percentage changed by user) would turn Yellow
Cells > H2 would be Red
I need it to fire whenever the value of one of the cells in the range changes.
I have tried If statements, Select Case, and a combination of both but just can't get it!
I know how to set a conditional for a cell to change a color when i apply a specific value, but how about if i want to set E2 cell to change to green when i place a 'X' on F2?
Pretty much I want 2 columns that say Yes and the Other No. When i place a X on Yes that other cell turns green, if i place a X on No that other cell turns red.
I am trying to set up conditional formatting in cell C4 to change the font to a smaller number based on the value of C4. If C4 = 0 then Font Calibri 16, otherwise Font Calibri 24. However, the font size is not availabe, it is greyed out. Is there another way to accomplish this without using VBA? In the worksheet could I use an if() statement to change the font size?
View 6 Replies View RelatedI'm trying to get conditional formatting to change the cell color based on a few conditions.
I want the cells in column D to turn red if;
- The number in column B has a match in column A
- And the corresponding cell in column C is not blank
- And the corresponding cell in column D is blank
In the example below, cell D4 should be red
If there's a match (Column B to Column A) and;
- If cell in column C is not blank and cell in column D is not blank, do nothing.
If there's a match (Column B to Column A) and:
- If cell in column C is blank and cell in column D is blank, do nothing.
Here's the formula I attempted but didn't get it to work.
IF(AND(C2"",D2=""),MATCH(B2,$A$2:$A$15,0),IF((AND(C2"",D"")),"",""))
How to colour cells depending on text in other cells, for example,
I would like cells D26:AA26 to turn light red if the letters 'FSM' are in cell 'E26' even if other text appears in it, eg 'SA+/FSM'
I have been playing about with conditional formatting but can seem to solve the mixed text issue?
I have included an example below,
Do you use a "*FSM*" around the formula?
[URL] ...........
