I have created the If statement below, in a nutshell its comparing current month performance to last month, stating if it has increased or decreased by last month and how much percentage by
example output would be 'This has decreased by x%"
my problem is when it states the performance has increased , the x% is coming as a negative number (-x%)
I am trying to put together an IF statement within excel which will give me certain output depending on the particular value within ONE cell.
For example:
If cell L5 has a value between 0 and 1.00 output value 0 If cell L5 has a value between 1.01 and 2.00 output value 20 If cell L5 has a value between 2.01 and 3.00 output value 40 If cell L5 has a value between 3.01 and 4.00 output value 60 If cell L5 has a value between 4.01 and 5.00 output value 80 If cell L5 has a value between 5.01 and 6.00 output value 100
All i am trying to do is create a function that will provide me with the minimum invoice value between cells H17:H150 which excludes negative values i.e. refunds ...
I am attempting to add conditional formatting (yellow fill) to cells that are greater than 15% or less than -15%. I've tried the following formula but, it highlights all cells.
Excel 2010, I have the following list (showing part of it):
Name T-Shirt Sizes Nathan S
[Code]....
The aim of the list is to see what Sizes each and every person needs and then count how many T-Shirts are required for that particular size. The list is over a 100 entries long so counting it manually isn't really an option as it's time consuming as well as errors might arise.
Thus, I've been trying to use the IF statement with the following logic but to as no avail
IF Size in Column is XS Add 1 to a particular Cell IF Size in Colum is S Add 1 to a particular Different Cell
and so on for the other sizes...kind of like a counter for a for-do-loop.
I use excel to read in an ASCII data file in which every line beginning with H is a header line and lines beginning with S are data line.
I want excel to filter out the header lines and output the file with the data lines only then outputs these in a new file.
I also want it to read the values from column 72 to 75 and subtract 6 from them then output them again to the same new file.
Sub read() Open "d:/intouch/0502SPSS.LOG" For Input As #1 Dim i As Integer Dim lines(9999) As String i = 0 Do While Not EOF(1) Line Input #1, z i = i + 1 If Mid(z, 1, 1) = "H" Then i = i - 1
I'm a complete Excel and VBA newbie and would like to know if it's possible to change the output of OptionButtons from 'TRUE' or 'FALSE' to "1"/"2"/"3"/etc..
The name of each button is:
Rating 1 Rating 2 Rating 3 Rating 4 and so forth..
The idea is for each rating to output its assigned number such that if the user were to click "Rating 1", the result would be "1", "Rating 2" = 2 and so on. I'm trying to design a survey and these results will then be used to calculate an average rating. If this is possible, how would I need to write the code for it?
This may be more of a math question rather than an Excel one.
If I have a spreadsheet with a cell that produces different negative number each time it is used, is there a way i can add a formula to make it a positive number.
So if Cell A1 showed -£244.22, I want to add an equation that changes if to £244.22
Cell A1 changes so it would need to do the same for any negative number within that cell.
My bank sends me my statement data as: Description, Date, Amount
...where the amount is text as a number followed by either a plus or minus.
Does anybody know how quickly convert the column of data into proper numbers?
I've been playing around with LEN, RIGHT and SEARCH, but not getting very far because I don't know how to extract the text to the left given the numbers vary in the number of digits...
I use data on a text file and import this into Excel and use a macro to format. The data lists invoices and credit notes and their dollar value.
Due to a fault in the program that creates the text file all dollar amounts are shown as positive figures. Credit note amounts should correctly be shown as negative figures.
The invoice number format is 8 characters beginning with a letter and credit notes begin with a number.
Is there macro code that will change credit note values to a negative figure?
I am trying to find a formula where I can identify where in row two the value chages from positive to negative, and where it changes from positive to negative it should return the date the value changes from positive to negative ie:
I am wanting to finish a worksheet for my boss. What I have done so far is taken the " forecast" of vehicles shown and used a formula of subtract from "actual" vehicles sold to get "how many we have left to go". what he wants to do is have the "to go" number change from red when a negative to green when it reaches a positive. example:
forecast = 30 actual = 27 to go = -3
that "to go" needs to be without a negative sign but in RED to negate a negative. Is that possible with a formula??
In this database i have cost and sale price. 20,000 parts have the numbers backwards.
if you loop the rows you can subtract =SUM(AE2-Y2) if that number is a negative number I would need the value of AE copied to Y2 and the value of Y2 copied to AE2. the 2 being the row number which would always change with the loop.
and I want all the negative number at -21 and down to be changed into -20 and all other numbers higher then -20 or whole numbers to be left alone.
So numbers -21 -22 -23 -24 .... -36 -37 -38 .... -45 -46 etc are all changed into -20 and all other numbers like -19 -18 -17 -16 .... 0 1 2 3 4 etc are all left alone.
I tried using the filter tab and couldn't see. I tried the replace key but that took to long changing each and every number from -21 all the way back to -99.
Is there an easier way to change all negative numbers in a specific zone of numbers (-21 thru -99) into one simple number so -21 would change into -20 and -22 would change into -20 and -23 would change into -20 etc etc etc.
I am trying to write a formula using If statement to output the result "True".
I have 4 columns (P3, T3, AD3, AK3) that store a value of either "Yes" or "No", I want to check the column if they are equal to "Yes". I have written a formula but it only works for 1 column at the minute, i not sure how to add the other columns into the formula:
How do I change a Positive number into a Negative number inside a cell formula?
I have a figure in Cell AE 101 which has the positive number 141
I have another cell W1 which has the positive number of 437
I want to create a formula in cell X1 that takes the number in cell AE 101 of 141 and convert the number inside the formula of 141 into a negative number of -141 and then subtracts that number from Cell W1 of 437 leaving an equation inside the formula to read. 437-141 = 296
Since the number in Cell W1 changes all the time and the number in AE101 Changes all the time the new formulated number in X1 will change all the time too as the cells get updated.
I have two arrows: - Red Arrow points down to signify negative change - Green Arrow points up to signify positive change
These arrows look exactly like the Excel 2007 conditional formatting arrows you would apply to a cell - the only difference is that I have inserted them as shapes so I can float them over a graph.
GOAL: Corresponding with the graph, if a cell shows a (+) change, then I display green arrow and hide red arrow. Vice versa for a (-) change.
Positive cash flow cells all have green background, Negative cash flow cells, all have red background.
I calculate all the "sub- total" columns into one "total sum" cell. Based on this "total sum" I want the cell background to be red if the total sum is negative, or green if total sum is positive. How do I make the cell change to the proper background color based on whether it's a negative or postive total sum?
= IF(A2 = 50;F2;A2) this gives me circular reference. All I want is if the value is = 50 to change the cell value, otherwise to leave the old value intact, as it is.
If I write something like this:
= IF(A2 = 50;F2) the cell is assigned FALSE, and the old value is overwritten.
How can I avoid setting to the FALSE value, without having the ciruclar reference error ?
I have a large dataset (24000 rows) that requires me to multiply two different columns of integers. In some cases, the two integers are both negative and multiplying them results in a product that is positive. I actually need that product to be negative rather than positive. I can't quite seem to figure out the best way to accomplish this.
I have a Piece of code that works when a cell changes its value. I want to try and get it to work when only cells in coloumn B change. I thought the best way would be with using an IF statement but i am unsure on the code to write and get it to work. This is the code that i have at the moment.
I have a bit of code in sheet two of my document that requires user input to produce output. However I have the document set up in a vway that requires the actual input to be placed in a vell in sheet one, and the cell in sheet two is just "=cell in sheet one". This causes the input cell in sheet two to change but the output cell does not produce the new answer.
I have data that comes from a subsytem that places the negative sign at the right of the number, so it is recognized as text. I can get around this using find and replace and then a second step to multiply that by -1, but is there a formula that can do this for me?
