I am attempting to add conditional formatting (yellow fill) to cells that are greater than 15% or less than -15%. I've tried the following formula but, it highlights all cells.
=or(b2:b5>15%,b2:b5
Excel 2000. I am having a little problem getting the list of numbers detailed below to turn red if Negative and Green if positive, (0:00 to stay blank). These numbers will changed between a maximum of 120:00hrs and -120:00hrs....
View 2 Replies View RelatedAll i am trying to do is create a function that will provide me with the minimum invoice value between cells H17:H150 which excludes negative values i.e. refunds ...
View 6 Replies View RelatedI need the conditional formatting to make all numbers that are zero clear (i.e. no fill).
I need it to make all negative numbers to be red, however it doesn't seem to recognize "-1" as a number, and ends up highlight everything red when I say "highlight values < -1 red".
How would I do this?
Can I use Conditional formatting (highlights duplicate values) but highlight the number even if the number is an Positive or Negative number.
It must highlight the number if it's -300 or 300 in both instances.
I have two arrows:
- Red Arrow points down to signify negative change
- Green Arrow points up to signify positive change
These arrows look exactly like the Excel 2007 conditional formatting arrows you would apply to a cell - the only difference is that I have inserted them as shapes so I can float them over a graph.
GOAL: Corresponding with the graph, if a cell shows a (+) change, then I display green arrow and hide red arrow. Vice versa for a (-) change.
Is there "code" for different formatting in a spreadsheet so you can use an IF statement to do something like:
if(A1=blue background,"Yes","No")
or
if(A1=red text,"Yes","No")
etc.?? But replace "blue background" and "red text" with some sort of number code? I want to compile a list of the items that are formatted with certain background colors and/or text colors and then organize only those items into a chart.
I wish to use a formula to highlight a date based on two criteria in two separate columns;
The first is the Date that will be in Column B.
I want it to highlight the date if : Today() is greater than that date in the cell plus 5 years (or 1824 days)
The second criteria I want is for the date to be only highlighted if the corresponding cell (in column A) does NOT contain the term ("Basic")
I have the formula:
=AND((TODAY()>(B1+1824)),A1=("Basic"))
which highlights the date correctly IF the term in Column A is "Basic" : But I cannot figure out how to insert the NOT statement to make the formula flip around so it only highlights those dates older than the 5 years requirement and NOT contain the "Basic" in column A.
I have several rows with data in and what I would like would be to total the amount of time "CU" is displayed and if that number is less than say 10 the formatting is applied. I need if possible to be able to do this via the one condition.
View 2 Replies View RelatedI type this formula and it work only for the first and the last condition, for the other condition it return to me FALSE. i dont now what is wrong,
=IF($C$10=1200,$E$10
Can you do a IF statement in Conditional Formatting? I need a column to highlight Red if there is a blank in it based on the current time COMPARED to the stated time in another column (on a separate tab)
So if current time is 1:30 PM and the stated (appointment) time on the other sheet is 1:15 PM, and my control field is still blank, I need it to turn Red.
Set MyRange = Range("A1:AZ9615") ' Range to apply format to
For Each Item In MyRange
Select Case Item.Value
Case "1780", "1800", "1810", "2050", "6170"
Item.Font.ColorIndex = 3
'x = 3
Case Else
x = xlNone
End Select
Item.Rows.Interior.ColorIndex = x
Next Item
I want it to search that range and turn those Numbers in Quotes to Red, which it works fine, but Somtimes those numbers are Imbedded in a string excample "1810-1-DAV". So my Question is When It turns my normal numbers red, how can I get it to turn the STRING RED ALSO?
I am trying to eliminate the use of formulas for conditional formatting in my code. I heard that the CASE statement might work for this. Below is the code I have but the case does not like the second case statement.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range(("S2:V" & TTRows), ("W2:W" & TTRows))) Is Nothing Then
Select Case Target
Case Is >= 0.8
icolor = 3
Case is >= 0.7 and not >= 0.8
icolor = 6
Case Else
icolor = 0
End Select
Target.Interior.ColorIndex = icolor
End If
End Sub
Conditional formatting. I have been tasked with creating a simple game for a group training project.
The game consists of users filling in the answers to questions (simple one word text answers). My boss wants to have a master sheet with the correct answers, and a subsequent sheet that will then compare the employee's answer to the master sheet. If the employee's answer is correct, then the output sheet simply displays the correct answer, however, if the employee's answer is wrong, he would like the output to display the correct answer and highlight the cell.
Is there a way to have the output sheet highlight a cell only when the answer on the employee sheet is different from the master sheet? I was thinking along the lines of using an if statement to see if the values of the employee sheet differ from the master sheet, but I do not know how I would then use that result to highlight the cells in the output sheet.
I created added conditional formatting to the Response Due column, to keep track of when response was due.
I only want the conditional formatting to be applied if the cell next to it is blank.
For example, the last one on my attachment is due 3/26/14 but I have already submitted a response (see column K)
What can I add so that only those dates next to a blank in column K get the conditional formatting?
Sample.jpg
I have several worksheets in a workbook that has dates of completion of
various training topics. Some of these topics require annual (12 months),
bi-annual (24 month), 6-month, or even 2-month re-training.
What I am trying to accomplish is to automatically shade all cells for dates
that fall within one month of these periodicities based on the computer's
clock when a workbook is opened. Unfortunately different columns have
different periodicities so what I was planning on doing was putting that
monthly number in a cell ("12" in A1000, for example for all Column A
values). When the file is opened, if any of the dates in column A are more
than 11 months from today's date (A1000 minus 1), they are within one month
of needing to be re-trained and I want the cell shading to be a light
yellow.
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedI want to highlight a cell if the text displayed from an IF formula is equal to the cell content.
CELLS BK10:BN10 are merged and have entered into them the following text "SELL"
Cells BJ20:BP20 are merged and contain the following formula which currently results in the cell displaying "SELL"
=IF(BM22<=-0.08,"SELL", IF(AND(BM22>-0.08,BM22 < -0.03),"NO INDICATION", IF(BM22>=-0.03,"HOLD")))
Cell BM22 is a percentage calculation of the differences between two different days of volume for this stock and that formula is: =(BH22/BH25)-1 Cell BM22 currently is calculating the result to be -65.65%
When I set up a CLASSIC Conditional Formatting using a formula (="If($BJ$20=""SELL""") to check the if the text in cells BK10 match the text displayed in cell BJ20 - I get no error messages and no formatting?
I am using Mac Office Excel 2011. I feel like I have tried everything including changing the Number selection type of the cells to TEXT. Nothing seems to works.
Im using access 2003 and the conditional formatting is only limited to 3. But i wanted 5. I was told it can be done using VBA. But I've got no programming experience whatsover.
Basically this is what i want, but i dont know how to translate this VB
IF Cell Value = >1 then make the value "Bold", "Bordered", and "Fill" with Orange colour.
IF Cell Value = "H" then make the text "Bold", Bordered, and "Fill" with Green colour.
IF Cell Value = "S" then make the text "Bold", Bordered, and "Fill" with Yellow colour
IF Cell Value = "A" then make the text "Bold", Bordered, and "Fill" with Blue colour
IF Cell Value = "U" then make the text "Bold", Bordered, and "Fill" with Red Colour
I am having a very difficult time trying to figure out a conditional formatting formula for something that seems very simple. There are 3 conditions I would like to apply to cell B2: If the value of I2 is less than or equal to 24, but greater than or equal to 21, shade B2 red. If the value of I2 is less than or equal to 20, but greater than or equal to 12, shade B2 orange. If the value of I2 is less than or equal to 11, but greater than or equal to 8, shade B2 yellow. I am sure I am missing something quite simple here.
View 5 Replies View RelatedCan Conditional Formatting be set on multiple values? I cannot get this to work with any formula, the cell values are not between two values. For example: for value = D or R, or X change color to green. (I would have another condition within a range F to Q)
View 4 Replies View RelatedFor use in conditional formatting, how do you check three values are identical?
=exact doesn't work, x=y=z doesn't work.
Using conditional formatting to make all the cells that contain numbers and are formatted to percentage format make display in red color? let's say I want to set this conditional formatting rule initially after just opening the excel book and afterwards when I type in values/text etc. into the cells I want the cells where I have input numbers and chose the percentage format to come out in red color? and all the rest stay in black color?
View 6 Replies View RelatedI need a conditional format that highlights duplicate values in different color. For example 221 and 133 are duplicate values in a range, but I want them to not show only in red. I want duplicate values in the range to show in an individual color.
I have an idea of running a macro that counts all the duplicates, paste them in a separate sheet where only the duplicated values will show, then have a regular conditional format of "Equal to".
I have a set of values on Sheet1. These 'original' values will never change.
I then have a set of values on Sheet2. The 'updated' values get updated every month.
On Sheet3 I want to show the updated values again, pretty much a copy of Sheet2, but where a value is higher than that on Sheet1 or lower than a value on Sheet1 I want to use conditional formatting to show this.
Is there a simple way to use conditional formatting in such a way? I have a long list of values so don't want to individually create a rule for each cell.
I have 3 values in C3, D3 & E3 which need to be all the same at all times but when they are not I'd like to highlight the one that isn't with a background colour.
View 9 Replies View RelatedIs there a way to do the following using conditional formatting?
I need to have all duplicates highlighted.
For example (Since "Ana M." is the first) highlight both rows (or at least the group of "Ana M." cells in the column, entire row not necessary)
Highlight:
Ana M. 12 A St 333-3333
Ana M. 23 Z St 333-3333
Skip:
Jane S. 12 A St 555-5555
Jane S. 15 Z St 555-5555
Highligt:
Sam A. 55 A St 222-2222
Skip:
Tony J. 45 A St 444-4444
Tony J. 11 B St 444-4444
Tony J. 66 Z St 444-4444
I have a spreadsheet using Conditional Formatting to colour cells. Is it possible to hide the cell value so only the colour is shown?
View 2 Replies View RelatedI need to find rows in my large worksheet that have 2 vendor names for a single vendor ID. Each vendor should only have 1 vendor ID.
Is there a way to highlight rows that have a single vendor ID for more than 1 vendor name?
I want to do conditional formatting based on two cell values.
i want to do conditional format the column 'R' based on clolumns 'J' and 'R'.
column 'J' is a text column named PRIORITY which can hold the values P1,P2,P3 an P4.
Column 'R' is nothing but difference of two columns 'M' and 'H'(both are time stamps).Column'R' is in below format.
=TEXT(M4-H4,"h:mm:ss").
column M and H are in below format:
eg: 9/11/13 9:41 AM
Now i want to format the column'R' like
if column J ="P2" and column 'R' > "00:10:00"(10 mins) =it should become red.
if column J="P3" and column 'R'>"00:30:00"(30 mins) = it should become red.