I'm using this formula to count how many times the date in column C and the text "WON" appears in column I and it falls within the month & year that is in Z65.
=COUNTIFS(INDEX(C:C,$AL$15):INDEX(C:C,$AL$17),">="&DATE(YEAR(Z65),MONTH(Z65),1),INDEX(C:C,$AL$15):INDEX(C:C,$AL$17),"
I know there's a pretty compley formula out there that counts the occurence of say Fridays in 2009 - does anyone have this? I had it before in a file but ranged valued the results showing the count of each day of the week for each month in a given year.
View 9 Replies View RelatedI use this formula to count number of entries month wise.
Following example is for Month of Feb.
How can I convert this to count entries for current year ( of course month wise).
I am writing a formula that will sum data for a 12 month period that is not based on a calendar year. For example may have data starting in June 2011 running to date, but not every month. If I set a start date for Year 1, say April 2012, I need to see Year 0 numbers (anything prior to April 2012), Year 1 numbers (April 2012 to March 2013), Year 2 numbers (April 2013 to March 2014), and so on. Date format is currently mmm-yy.
If this could be performed via a macro which references the database (spreadsheet), then even better. The database will contain multiple columns, of which two will contain the date and corresponding number respectively.
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
Attached is an example : Budget Example.xlsx
I am working on an excel sheet where I enter dates for registered events. I need to count the number of days registered for any month. For example, Column B contains date of event, column C contains number of events for that particular date.
I need to get the following results:
- How many dates registered in the Month of January (or any month), I assumed this is the number of dates that were entered for the month January.
- How manu events registered in the Month of January (or any month), I assumed this is the sum of the numbers in column C that match the dates of the month January.
I need the formula for this example because I have other counts I need to calculate per month, such as number of people registered, etc.
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
View 4 Replies View RelatedIn attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
View 2 Replies View RelatedI'm after a formula this time ... i've searched the board and can't find what i need.
a cell shows 2009 December
and i'd like a formula to covert this to 31st December 2009 .... i.e. for any cell i'd like to know last day of month... and month and year ..
I am trying to count dates from a list using sum product (I found the formula via google) I have plugged it into my spreadsheet but it does not seem to be calculating correctly.
I have attached the spreadsheet too : sumproduct_Error.xlsx
=SUMPRODUCT(YEAR(Tbl_finish[Finish]=2008)*(MONTH(Tbl_finish[Finish]=1)))
I am expecting a count of all the dates in January 2008 with the formula above.
I have a sheet with the following values:
280315 085B 10:24 2R
The '085' is the 85th day of the year. I would like a formula that reads that part of the data, and return the month that day is in, in the "jan", "feb", "mar", etc. format.
I would like to calculate the sum of investments based on their expiry date and have the totals per month (and year). I have a table that looks like:
TermInterest rateMaturityBalance
24 Months7.12%11 November 200740,000.00
12 Months7.74%13 November 200750,000.00
24 Months7.05%10 January 200853,889.12
12 Months7.85%11 January 2008120,000.00
12 Months8.02%22 March 200817,000.00
36 Months6.68%30 June 200832,000.00
I'd like to have something like:
Nov 07 90,000.00
Dec 07 0.00
Jan 08 173889.12
and so on...
Admittedly I am an Excel novice, so excuse me if my question is dumb and has a simple answer (actually I hope it has :-) but I have tried to find a solution by searching forums, my books, online help, I tried my luck with sumif and SUMPRODUCT functions, even used the conditional sum wizard, but I can't get it right
i need to put a date into a month +year
like this:
1/06/2008jun/08
i did this with a format date.
After that i tried to copy/paste special values. So i can make i pivot table on the jun/08. But the problem is he still see it like a date.
MaandTotal
jun/081jun/0810
he sees that 1/6/2008 is not the same as 2/6/2008
that is why i got 2 lines of jun
but i just want one and that he counts all the junes together
I want to calculate Year To Data in B1 based on some data in C1 to N1. The monthnumber is located in cell A1.
There is of course several ways to do this, but is there a simple and easy formula one can use.
formula off here i use all the time relating to finding and sumproducts for specific months and years i.e.
Jan 2008, Dec 2007.. depending on these dates excel searched through a specified range and returned me any values i wanted like No. of occurences, totals, sums etc etc it was a sumproduct formula...
is there any way i could specifiy a date i.e. Jan 2009, which would search column a and return the date /and/or an account number in column b, only if the date was during jan 2009?
The reason i want this is to use a lookup on the account numbers to return specific items of info, but i only need the account numbers if they occurred in specific months which i want to choose.
I have 5 years of data in 2 columns:
Col A. Col B.
8/2/2004 Value 1
to
7/31/2009 Value n
I have a table set up as follows
1 2 3 4 5 6 7 8 9 10 11 12
2004
2005
2006
2007
2008
2009
I was wondering how I could construct a conditional statement to pull the associated values with the given month and year in the table...
I tried the following to no avail... I'm just getting a zero value:
=AVERAGE(IF(MONTH(J6:J1255)=AC$35,IF(YEAR(J6:J1255)=$AB37,K6:K1255)))
I have the following variables in these columns
Column 1: Ship (1064, 1065, 1066 as the field contents)
Column 12: Date (21-Feb-08 as format)
Column 13: Weld Length (1000 as format)
Column 15: Defect Length (1000 as format)
What I need doing is the following is in a single cell per month add up what the total weld length is as well as the defect length as I have Jan 08, Feb 08 etc on another sheet where these values will be returned.
There is a seperate sheet for each Ship so would like a formula that I could ammend 1064 to 1065 etc
I have a sheet where the columns have the month end date for each date, ex January 31,2014 February 28, 2014, March 31, 2014 etc. These dates are used in another formula to compare to the current date and if the current date is past the result is different from when if the date is in the future.
I would like a formula that would update the Month end date when we enter a new year. So for example once we get to January 1 2015 my date would change to January 31,2015, February 28, 2015, March 31, 2015. this would note be dependent on the system date but on the date in another cell.
I have a spreadsheet that consists of date, product number with amount received against each date.
What I need are formulas that will automatically provide me with:
1. The sub-total monthly income for each product against each financial year.
2. Total income for each product by financial year.
3. Total income for each financial year.
How to get only MONTH' YEAR if there is a DATE-MONTH-YEAR in a cell?
A1: 27-July-2012
Answer D1:JULY' 2012
Pl note "' " is suffixed after JULY (the month).
I have a worksheet called "zz_Exchange" that contains the exchange rate for my company for each month of the financial year. I am using this info in a summary page that uses the data for multiple calculations in the workbook.As we pass each month I would like to move the focus of a cell in the summary sheet to the relevant month in "zz_Exchange"
The column names are "currency_code" (USA Euro etc),
"currency_year" (09, 10)
"period" (1-12)
"exchange_rate" (this is where the data is held)
How I can subtract a year when I formulate based on if the current month is January.
Such as Current month = January 2014, I would require the cell to populate December 2013, any other month would return the current year value.
I have currently tried { =DATE(YEAR(A3)-1,MONTH(A3),DAY(A3)) } whereas cell A3 uses NOW() function formatted to MMMM, but it changes for every month.
finding a code that would automatically insert various phrases into a column depending on whether or not the person in that row was due to renew their membership in our organization. The code I received works fantastically, but I've come across one snafu:
View 3 Replies View RelatedSo I use this formula on one of my task sheets to do budgets. Now the problem is we are entering 2014...yet the formula won't go into the next year without some sort of year scan:
Code:
=INDEX('Template Sheet'!$B$1:$S$233,MATCH($A11,'Template Sheet'!$B$1:$B$233,0)+2,LOOKUP(MONTH(DATEVALUE($B$8&" 1")),MONTH('Template Sheet'!$D$1:$S$1),COLUMN('Template Sheet'!$D$1:$S$1))-1)
that is the first formula but I need it to look up the year also and everything I have tried has failed miserably. So basically when it is matching with the month I have a drop down that has Jan-December...but I need it too look to the Feb 2014 not Feb 2013...How can I add the year section?
I am experiencing a big block on this one...I am trying to find the sum for a group of cells in a particular column given that MONTH and YEAR (as stated in two separate columns) match the date that is displayed in, lets say for example, A2. below is a sample of the data I am refering to.
************************************************************************>Microsoft Excel - Investor_Portfolio_TEMPLATE.XLS___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA12=
ABCDEF1DateAmountYearMonthSumofAmount23/21/05990002005Mar33/21/0599000Apr46/8/0593000May56/9/0599000Jun63/23/0599000Jul73/23/0599000Aug81/4/0699000Sep91/5/0699000Oct101/6/0699000Nov112/1/0699000Dec122/5/06990002006Jan134/5/0699000Feb144/7/0699000Mar155/2/0699000Apr165/8/0699000MaySheet2
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.[/url][/code]
I'm using this formula from
[url]
Nth Day Of Week For A Month And Year
This formula will return will return the date of Nth day-of-week for a given month and year. For example, it will return 26-March-98 for the 4th Thursday of March, 1998. Days-of-week range from 1 to 7, with Sunday = 1 and Saturday = 7.
=DATE(Yr,Mon,1+((Nth-(DoW>=WEEKDAY(DATE(Yr,Mon,1))))*7)+
(DoW-WEEKDAY(DATE(Yr,Mon,1))))
Where Yr, Mon, Nth, and DoW are cell references or values indicating Year, Month, Nth, and Day-Of-Week.
I would like to be able to change the year and month in A2 and B2 and have the calendar change.
I will be inserting rows between the weeks to return appts, if I can get this part working.
I could make a new tab for each month, but I thought I would give this a try....
I have the following code, which I used to search Column A for a date and then copy the adjacent cell next to the date and paste it to sheet2.
However what I want to do now is be able to enter just the month or the year and the code will find the cells that contain the same year or month that I entered. I know to find a string value in a cell I can use InStr() however I don't know how to implement this into the code that I have, As depending on the month that I select I want the code to put the value in a certain cell.
Here is the code that I have so far
Code:
Sub SearchMacro()
DateSearch.Show
Dim LR As Long, i As Long
With Sheets("Sheet1")
LR = .Range("A" & Rows.Count).End(xlUp).Row
[Code] ......
How I can do this by edited the current code or any code for that matter.
I want to create a monthly timesheet which contains 9 columns for
(Date, Day, Project no., Activity, Time In, Time Out, Total Hours, OT Hours, Remarks)
I have used IF Function to calculate Total Hours & OT hours automatically. Time IN & Time OUT, Project No., will be entered manually on daily basis.
Weekday function is used in the Day column to return the corresponding day of the date in the Date column.
Name of the Month and Year will be manually entered in the designated cells I3 and I4 respectively.
Now the solution I am looking for is, the dates should be automatically entered in the Date column (in cells A8 to A38) based on the Month & Year entered in cells I3 & I4. Dates of the corresponding month of the year should only be filled in. (If a month is not having 29, 30 or 31st day, the corresponding cells should be left blank. i.e. nothing should be displayed in the corresponding cells). I am looking for some sort of formula to enter in the cells of Date column (A8 to A38) achieve this. I have searched the forum and could not find anything which could at least give me an idea about the kind of function or formula to be used.
Attached here is the time sheet I am trying to create.
I'm trying to wrtie an IF statement to display one of Q1, Q2, Q3 or Q4 based on the three letter month abbrev. All i have so far is the following, which isn't leading anywhere - and i have a feeling theres an easier way to write it.
=IF(((OR(G2="Jan","Feb","Mar"),)),"Q1",""),IF(OR(G2="Apr","May","Jun"),"Q2","")
I have a detailed note inside biweekly.xls, it explains everything in context.
Two excel sheets, one is updated manually (Vikki's Yearly Averages.xls), while the other is for reporting (biweekly.xls)
The coding will all be in biweekly.xls.
First, it needs to take a date to the right of a name from biweekly.xls and use the month and year from that date for the search.
Then it needs to look in VYK.xls under the name and copy every entry starting in the year specified and month specified and ending at the current date.