produce graphs/charts based on inequalities monitoring information - gender, nationality, age etc. I'm capturing info from several events, one sheet per event. Had a look at COUNTIF but not sure it's what I want and looks like I'd need sub-sheet for each? Capture.PNG
View 7 RepliesI have data I use in a Pareto chart. This data is found somewhere in cell range A18:AF20. I want the chart to adjust itself to only the cell range with data. It may be A18:M18 or perhaps A18:AB18.
Is there any way to set the cell to look at only the cells with data in them?
Have Series 1 (to be a line chart) with 20 data points X values are 0 to 68. Have Series 2 (Bar chart) with 68 data points, again X values 0 to 68
Cant get series 1 to display beyond X value of 20
I have several dynamic charts using named ranges, but I am charting 1 series of data. What about when I have multiple data sets or series and do not want to use PivotTables? Do I really have to make each one a named range? If that's the case, using VBA looks much simpler.
View 2 Replies View RelatedCharting Data Based On Drop Down List Choice
I am trying to build a report where I can chart data base on a dropdown selection.I did build the dropdown lists, however I don't have any expertise on execel functions in order to make it work.I am attaching my draft report.
how to play with data ranges and define names for charts to automatically update them by using the formula offset + counta. An example would be: =OFFSET(Sheet1!$B$7,0,0,COUNTA(Sheet1!$B$6:$B$37)-1).
So, the problem comes when there is a need to select a data range which is not that well defined like $B$6:$B$37. So, I need to import data regularly into my workbook, this data will be imported right below of the last cell with values.
Now, how would I manage to automatically select the data range from this new import for my chart? See attached example. I have highlighted in Yellow a potential import... there is no data in there so feel freel to fill it with any numbers you like.
I have tried to use a vlookup to find Country+Programme+Year (cat1 in the example) in the 'counta' part of the formula above. But I get lost,as a vlookup would retrieve a value and would not be useful for the data range?
This should be easy but after searching "consolidate" all that I could find was multiple sheets and complex questions.
I have 5 data columns that I need consolidated into 1 single column. I've tried the consolidate funtion but it appears to only work with formulas and numerical values (unless I cant find the proper command.) I've also tried paste special but it populates the cells following.
I need 5 cells word values pasted into a single cell
if it is possible to create a formula to just extract numerical data. It is formated in text or sometimes general format.
Example
John Doe - 1202939402093
109230920933 - Jane Doe
Is there such a formula that will read the cell, and extract the numerical part of the cell and place it in another cell?
I have imported data and numbers from a website and would like to sort the data in numerical order. Excel wants to sort the data 1,10,2,20... in that order. I know from past experience with an older version there was a way to convert the numbers so they can be sorted in the way that I want.
View 2 Replies View RelatedI need to create a table of non numerical data that I can refer to in a formula, which will compare two pieces of data (both also inside this table), and based upon which is "higher up in the hierarchy" - the cell will display a certain result.
Basically it will be an IF function using non numerical data that has a numerical value / "rank" attached.
Specifically - I need to allocate values to this list in cells A1:A5...
EUR
GBP
AUD
NZD
USD
....where EUR is highest ranked and USD lowest.
Then in column B and C will be listed each of these values but in various combinations. In column D I will build simple IF functions to show the highest ranked in each combination. eg B1=EUR C1=GBP D1=IF(B1>C1,B1,C1)
how to process this non-numerical. I tried to use formulas but it wasn't fruitful. refer the table and.
Name
English
G
Maths
G
Science
G
History
G
Aggregate
Result
Achievement
[Code] ......
****The aggregate derived from the grade of the subjects , where each grade will be given a pointer and the average pointer for all four subjects will be considered as aggregate :
Pointers for grades
A =1
B=2
C=3
D=4
E=5
This is how the aggregate for Alex should be counted:
English A = 1
Maths C = 3
Science B = 2
History A = 1
*****aggregate = (1+3+2+1)/4 =1.75
The result column be showing Pass/Fail. If the student fail one of the four subjects he is considered as Fail.
**Grade D and E =>Fail
The Achievement Column should be indicating the numbers of As, Bs and Cs
for example: O6= A(2),B(1),C(1)
Need to sort my data in column A which contains a long list of numerical data. To do this manually using copy and paste would be easy, but not viable because of the large amount of data.
The attached PDF file illustrates the data. I wish to replace each date of dirth entry in column A (one D.O.B. in each cell / row, expressed as YYYYMMDD) with the client identifier number (format 937XXXX) a couple of cells above. And at the same time delete the row containing the client reference (or its contents). The data in column A should retain the same relationship to the data in the other columns (B,C). it may require a short piece of VBA code.
Need the code to make a graph (bar diagram) based on the only the rows with numerical data in a column, where there is also blanks and NA. The graph I would like to make and the data-structure are shown in the file Graphs.xls. When updating the graph later on the cells with data may have changed (i.e. new rows with data may have been added)
View 4 Replies View RelatedWhat would cause a pivot table to turn numerical data into a letter?
I have a field, cost center, that has about 15 different possible values in it that look like this: 141350, 141360, 141370, 141380, etc. When I compile the data into a pivot table and try to sort on pivot table everything looks normal, except that 141350 is returned as 'R'. If I change the value to anything else, it is fine, but as 141350 it's changes from numerical formating to a single letter.
I'm sure something was accidentally set to do that automatically.
I'd like to find out the formula where numerical valued between 1-2000 equals True and numerical under 0 equals False. Examples are in the attachment.
View 3 Replies View RelatedI would like to create a chart with stacked columns. Usually, the data on the Y-axis is some kind of numerical data, such as budget. I would like to have the Y-axis have non-numerical data (= nominal categories).
Example :
Take the following data :
category | productname
red berry
red carrot
green cabbage
green apple
The ouput format i want is a chart which shows on the horizontal axis the categories red and green, and stacks in each category the right productnames on top of eachother; preferably each productname should have a different colour and showing data labels (e.g. "1", "green","apple" could be 1 specific data label).
I don't know how to achieve this, because if you display data as "count of productnames", then automatically you get something like a block with value 2, which doesn't show the different productnames inside that block.
Can the desired chart be made with Excel somehow?
I am quite inexperienced with Excel and I am struggling to understand how should I set up a formula, within the data validation function to achieve the following:
I need to restrict a certain set of cells, for people to be able to input only the following values: "1", "0.5", "A", "H", "0.5A" (or 0.5a), "0.5H" (or 0.5h)
And I would need the data validation tool not to include blank cells.
loop that can calculate the median of dynamic ranges. I need to run through all columns and for each column find the the ranges (there are more ranges and they are seperated with a blank row) with numerical data and then calculate the median and thereafter continue down to find the next range with numerical data in that row and so on.
View 4 Replies View RelatedI'm having issues with Excel's 2010 conditional formatting. Seems easy to use, but I'm trying to highlight values based on 2 columns of numerical data. Example:
Column F:
6
6
14
Column L:
3
NA
17
I would like Column L to highlight values that are greater than Column F in green. If they are less than Column L then highlight them in red.
Seems I was able to do this with Excel 2003, but I don't understand the 2010 version.
I have an existing chart and I want to update the plot utilizing data that has been calculated and stored in 2 arrays X(N,1) and M(N,1) via my VBA macro. How do I do it?
I am just reusing some code that works most of the time to reset the seriescollection of specific charts. Sometimes is will just error when I try to set the .values object to my range of values. It's strange because it will work for 10 seriescollections/identicle ranges on the same chart and then error out; and sometimes it will work perfectly.
I've checked:
The chart reference object
The range I'm setting
The code I've copied from
It's all correct. Here's a short sample.
ValRng = Range("AR7:CY7")
Set usechart = ActiveSheet.ChartObjects(1)
With usechart.Chart.SeriesCollection.NewSeries
.Name = "Prime 2000"
.Values = ValRng ' (also tried it this way) "=" & ActiveSheet.Name & "!" & Range("AR7:CY7").Address
End With
The series is created fine, and the name is set properly.
On my new sheet here it won't set ANY values, which is a real problem. If anyone knows what is going on, please let me know.
I have a large number of files containing thousands of X and Y coordinates. I prepared a macro which loads these X and Y data from all the files into one workbook, and it writes the file names into each row. So, in the end I get a file with this formation:
X Y filename
x1 y1 filename_1
x2 y2 filename_1
x3 y3 filename_1
.
.
.
xi yi filename_2
.
.
xn yn filename_m
It would be great if I could make then an XY Chart which contains the information of "filename" column too. I didn't mean labling, because in the end I'll have hundred thousands of points, so if I added labels to each point it would be impossible to see anything. I would only set that if I move the mouse to any point of the chart, it would show not only the X and Y coordinates, but the related filename too.
Is it possible to set it so in excel?
I am working on a project at work. I need to track our VIP guests. I only have their arrival and departure date.
Is there a way to graph and track the days between so that I can have a total of all arriving and In-house VIP guests on all dates in the range?
Here's a sample of the data.
10/18/201110/19/2011HOERMAN/SCOTT10/17/201110/21/2011SMITH/JOHN M
10/10/201110/13/2011WARNER/AMY10/18/201110/19/2011GERONDALE/RON
10/11/201110/12/2011BUCHANAN/JEFFREY10/17/201110/18/2011HUND/LARRY
10/20/201110/23/2011HADDOCK/CHRISTOPHER10/9/201110/12/2011
BLOOMER/ROBERT10/20/201110/23/2011COLE/ELIZABETH10/7/201110/8/2011IWASA/KENNETH
I have a line graph which plots the PERCENT_YIELD of units built (UNITS_PASSED / UNITS_BUILT) every week. I want to fill all future week cells with a formula so dragging the formula is not a manual operation every week (my overall goal is to automate a complex spreadsheet and charts as much as possible).
The formula is =IF(Q1080,Q109/Q108,)
Where Q108 is UNITS_BUILT
Where Q109 is UNITS_PASSED
My theory is if units were built (Q108 not equal to zero), plot the ratio. If no units were built (Q108 is zero) I do not want to plot any value on the chart.
The chart plots the correct values for the True conditions; however the chart plots a zero value for the False conditions. How do I not plot a zero for a false condition?
I am having an issue with dynamic charting using named ranges in excel. I quite often create dynamic charts using IF and OFFSET formulas to check conditions in order to create charts of data based on user inputs.
The issue I am having is with linking multiple tables of data in a single named range. In order to make this spreadsheet easy to maintain I am trying to take 3 separate databases and link the spreadsheets through named ranges. The formula I have written is as follows:
=VLOOKUP(VALUE(LEFT(OFFSET(Processed!$B$1,1,0,COUNT(Processed!$C:$C),1),6)),Raw!$F:$O,10,FALSE)
For context this is;
=VLOOKUP(VALUE(LEFT(OFFSET("Serial number I am referencing",1,0,"Qty of rows containing data",1),6)),"Value I want to return from separate table",10,FALSE)
[The formatting of the serial number between the two sheets is slightly different but they share the first 6 digits (hence the wrapped VALUE and LEFT formulas).]
This formula is working perfectly except that it doesn't store the entire data table in a single cell, it only returns a single value. If I enter the formula into a cell and drag it down it returns all the information correctly, however if I create a named range using the formula and try to chart it only the first value returned is charted.
Any way to modify the formula to store the entire data array in the single cell value so it will chart when used as a named range?
So I was looking for reassurance or validation more than anything. From what I can tell you can in order to build a chart that is dynamic throughout a range, you use the offset and count or counta function - 1. That part isn't a problem. My question is once you created that for your charts do you just normally plot your chart range or do you have to reference the named range directly into the chart range?
View 2 Replies View RelatedI have a simple sheet to record and graph my bloodpressure . The list of values is as follows:
col A is always todays date
cols B and C user input - integer
col D is a constant value 120
col E is also a constant value 80
Currently I am manually charting the range A1:Exx each day after I have added a new line for my daily readings. Whilst this works fine, I'd like to automate the charting process as currently if I select a range full of blank cells then my chart displays loads of blank values.
So I could use a Button on the graph which works out how big my cell range is ie; A1:E66 and graphs it for me or alternatively a background macro that does the same after I have entered the C col entry for each day
i would like to find out about:The different essential building elements for different chart types (like 3DBubble requires XValue, Value, Name and BubbleSize, for example, but what about clusteredColumn and the others?)How to address the building elementsThe optional building elements (changing background color and stuff)
View 2 Replies View RelatedI have a workbook with Sheet1 and Sheet2. I’ve programmed information from to be calculated and results inserted into sheet2. A new result every Row. I plan to do a graph taking the X-axis and Y-axis values from Columns A and B respectively in Sheet2. What is the VBA code for dynamic updating of graph? Meaning, I want the graph (a curve) that will have points added to the curve, extending it, whenever a new row is added into sheet2 – Columns A (X-axis) and B (Y-axis). The rows are not defined. It can have 100 to 200 rows or more..
View 6 Replies View RelatedI need to create a simple Talk Time Chart displaying our call center's talk time in 30 min increments.
TimeATT
08:00:00:02:03
08:30:00:04:06
09:00:00:03:56
09:30:00:02:57
10:00:00:04:57
10:30:00:03:29
11:00:00:04:41
[Code] .....