for example, is it possible to check if a Reference to Set a reference to Microsoft Internet Controls (shdocvw.dll) has been enabled in user Reference settings. And if not set, then set it via VBA
View 4 RepliesI have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
I am using the dsum formula to sum some values...the formula in B2 is:
=DSUM(BaseSistemasFebrero,"vlfinf",OFFSET('Planes Entidades'!B$1,0,0,COUNTA('Planes Entidades'!B$1:B$49),1))
The Planes Entidades sheet the data is layed out like this: ....
My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I am using this code
View 5 Replies View RelatedI want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I have attempted to attach an example worksheet.
Test check control.xlsx
I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
What I'm wanting to do is essentially use a reference to update yet another reference.
In more detail, I want to retrieve a value on a worksheet and use that value to alter yet another reference to another worksheet.
For example, I want to retrieve a value (let say its 16 from either a local cell or a cell on another worksheet) and then retrieve yet another value from another worksheet based upon that value (lets say the worksheet I would want is then "Subject 16").
I've attempted various nesting formats of the typical reference formula but obviously have had no luck. Would I need to use VBA or is there a simple solution that I am missing? If I do have to use VBA how should I go about doing this?
For example
=SUM(INDIRECT(C10))
where C10 would contain
="Sheet2:"&"Sheet3!"&"A"&ROW()
always returns #REF!.
However, ="Sheet3!"&"A"&ROW() as the Cell C10 entry will work fine.
15.2
13.9
6.1
9.19
and i wanted to divide these all by 4.
I can do this by clicking on a cell OTHER than one of those four above, and do:
=A1/4 (if 15.2 was A1) and copy that formula down.
But then I have the originals AND the new ones in separate columns.
I want to just be able to divide those original numbers by 4 without resorting to using other cells, but if I do =A1/4 on A1 itself it says that i have made a "circular reference"
I'm trying to connect to SAP R/3, and I think I'm not sure which references (Tools --> References) I'm supposed have checked.
All I want to do for now is the following:
Dim sapConn As Object
Set sapConn = CreateObject("SAP. Functions")
Unfortunately, I am getting a "Run-time error '-2147024770 (8007007e)': Automation error. The specified module could not be found."
I have read somewhere random on the internet that I should add "SAP:Remote Function Call: COM Support 1.0 Type Library" which links to the SAPGui Provided library librfc32.dll. However, this alone doesn't seem to work...
Running a worksheet with vba, at the start of the code I turn warnings off and at the very end of the code I turn them back on.When the routines complete a warning is raised:
A formula in this worksheet contains one or more invalid references.
Verify that your formulas contain a valid path, workbook, range name, and cell reference.
When I run Error Checking everything comes up clean.
Clicking on "Show Formulas" shows no formulas for there are no formulas on the sheet to show, just a chart, and clicking "Show Formulas" just turns my dates into serial numbers and screws up the display of the two comboboxes, messing the fonts and drop-down arrows, and since closing and reopening didn't revert the comboboxes back to normal I will now have to blow them away and resurrect them. I also see Show Formulas also messed up my command buttons. nice...
The only way I find to avoid the error is to turn Warnings OFF at the start of the charting routine and NEVER turn it back on.
I made certain that none of my names had any errors in them. Everything looks proper. So what next?
I fear something will create an error for me now along the lines of Murphy's Law
I update files monthly and save them each month with a new name (eg. Jan, Feb, etc.).
In the file I have a reference from one tab to another tab within the same file. So every time I re-save this file with a new name, it should still reference the cell in the other tab - same file.
BUT on 2 occasions this reference changed to an "external" reference to the previous month's file.
I've been doing this every month for over 2 years and this problem has only happened 2 times. I know others that have experienced this, but nobody knows what caused it.
Does anyone know what would cause this? The biggest problem is that I may not notice this has happened for a long time.
One other thing I might add. I use an older version of Excel (2000). I share these files with other people who may have newer versions (I'm not sure who has what). Can sharing these files with others over a network system have something to do with this? Can opening "read only" when someone else is in the file and then saving as a copy do this?
I want to do a search for the amount of people of a certain age in a column, but I want to be able to vary the amount of cells I look in. So first I might want to look for people aged 15 in A3:A35 and then in A3:A55 to see if there is a difference.
Now the optimal way to do this, in my opinion, would be to have a reference that looks like A3:A(B1) and then have the number of the last cell I want to look in in B1, in this case either 35 or 55.
is it possible to use references and concatenate them together that they are still references?
i have in:
file1.xls
sheetX:
A1: 'C:Infonic[file2.xls]sheet2'
file2.xls
sheetY:
A1: test
what i need is in sheet2 of file1
the value of file2.xls!sheetY!A1 = test
the problem is that i need to use the path to file2!sheet2 of the cell A1 in sheetX
is it possible to use sheetXA1 together with sheetYA1 as reference in sheet 2 so that i get back test as value.
I'm trying to use this formula in a cell but it keeps giving me #NAME.
What does this mean?
I have 2 colums like this. And I want whenever there is a reference like this âë. "some word" in column 2, to have the macro look up some word entry in column 1, find the text in the same row in column 2 and replace the âë. "some word" reference with the text found in column 2. (See attached, sheet 1 as it is, sheet 2 as I want it to be).
Sheet 1
another wordâë. "some word"
awordìåôÜöñáóç
bwordâë. "aword"
some wordêÜðïéá ëÝîç
Sheet 2
another wordêÜðïéá ëÝîç
awordìåôÜöñáóç
bwordìåôÜöñáóç
some wordêÜðïéá ëÝîç
I suspect there's a simple answer to this but I've looked and can't find it: In Excel 2003, when I add a hyperlink to another file and close/reopen my workbook, the link is saved as relative to the current workbook. So if the main workbook is moved or, in my case, when I use VBA to copy and email the sheet with the hyperlinks, the links are broken.
View 2 Replies View RelatedI have a problem with my references when sorting in excel. I have been searching for the problem, but did not found a useful solution.
I'm using excel 2003.
Let me try to explain my problem with a simple exampel.
I have a column with numbers and one with formulas pointing at these.
A B
2 =A1
4 =A2
3 =A3
Now I want to sort column A, and the column B should keep pointing at the original number. So I want this:
A B
2 =A1
3 =A3
4 =A2
But I get this:
A B
2 =A1
3 =A2
4 =A3
This output is what I would expect if I used absolut reference($).
Using offset(B1;0;-1) will work, but I cannot use this, since I will add/delete rows and the reference is not neccessarily next to it. Plus it can be a rather large sheet.
I cannot use dynamically name definition either, because it is intended for other users, and this will be too much work for them. What I basically need is a simple formula they can enter.
My sorting is done via a VBA macro, so if there is anything I can do through macro/VBA that will be okay as well, since I can do this without the user seeing it.
displaying the value of a reference once before filling down. I want it to display only once and not display anymore until a different value is included in the fill down. The rinse and repeat.
View 3 Replies View RelatedColumn O is names and column P autogenerates email addresses with
=CONCATENATE(SUBSTITUTE(O2," ","."),"@company.com; ")
So, John Smith becomes
"john.smith@company.com; "
That's perfect. I want to move it to another worksheet. When I paste it to Worksheet 2, A1 I get
=CONCATENATE(SUBSTITUTE(Sheet1!O2," ","."),"@company.com; ")
So why does that only generate "@company.com; "?
How can i copy references from a row, down a column. Like I want to reference A1:A10, but I want to reference them down A2:11.....I would like to just the references down.
View 1 Replies View RelatedI've attached a sheet with details. I have references that I want to copy to a different cell but I want the reference to stay fixed AND allow the column to move.
Book1.xlsx‎
this block of code works
View 11 Replies View RelatedI am doing some work in which I need a very flexible tool. I will be doing regression analysis on thousands of funds at a time. I need to define the range for each fund by a count function that counts the number of monthly returns that are posted. The code I have so far is below (I underlined where the references use variables):
View 3 Replies View RelatedI'm trying to copy a file from one directory to another directory. However, the source directory, I'd like to have it so it's created from values within specific cells on a Sheet named "PULL".
When trying the following, I get an error permission denied.