Structured References And With Cell References I Get A Column Of Zeros
Nov 25, 2007
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
View 9 Replies
ADVERTISEMENT
Nov 13, 2013
SUMIFS with less than & more than
I found this thread which works for normal ranges
I want to Sum for Values Greater than a specific date in my formula.
This first one works for a specific date (Relevant reference in red), so say 01/01/2014
Code:
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
Code:
To Sum for ranges >= 01/01/2014, I have tried this below based on the thread above but Excel does not accept this.
=SUMIFS(Table2[[#All],[Basic]],
Table2[[#All],[Cluster]],Table3[[#Headers],[Company]],
">="Table2[[#All],[Start Date]],Table3[#Headers],
Table2[[#All],[Perm / Temp / Prof / ETA]],[@Company])
View 4 Replies
View Related
Oct 22, 2009
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
View 9 Replies
View Related
Feb 10, 2014
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
View 1 Replies
View Related
Mar 2, 2009
I am using the dsum formula to sum some values...the formula in B2 is:
=DSUM(BaseSistemasFebrero,"vlfinf",OFFSET('Planes Entidades'!B$1,0,0,COUNTA('Planes Entidades'!B$1:B$49),1))
The Planes Entidades sheet the data is layed out like this: ....
View 9 Replies
View Related
May 30, 2007
I have a spreadsheet with 2000 rows, and I need to add one column with the IF function that looks at the cell in the column to the left for each row, all the way down. How do I do that without typing in the specific different cell references for each row in my IF column?
View 4 Replies
View Related
Aug 11, 2009
I would like to have the following fill down a column. =B5 =B7 =B9 etc. Is there a way to do this without doing it manually?
View 3 Replies
View Related
Feb 7, 2014
I'm working on a workbook where I'm linking data from a bunch of spreadsheets to a summary page. I have the first column (A) set up. I dragged the data across several more columns. Now I need to change reference to the tab in each column. Is there a quick way to do this without copying and pasting the tab name into each row (about 30 rows)?
(Each column represents a tab, the rows are the same type of data in every tab.)
View 1 Replies
View Related
Jun 24, 2006
get a cell to return a value depending on whether or not a cloumn is populated
for example. If i Have 3 columns EUR, GBP and CHF and there can (99% of the time) only be one entry in any of the 3 on any given row. How then can i get a 4th column to return the value EUR, GBP or CHF on the same row as an entry. I have a relatively complicate nested IF fromula but i think this is slowing down the worksheet as there are 500 or so rows containing it. Ive attached an example segment
View 6 Replies
View Related
Dec 27, 2013
How can i copy references from a row, down a column. Like I want to reference A1:A10, but I want to reference them down A2:11.....I would like to just the references down.
View 1 Replies
View Related
Apr 5, 2007
Contents of B2 are "=A2"
Contents of B3 are "=A23"
I want to select B2 and B3 and drag the formula to continue
Desired results:
Contents of B4 are "=A44"
Contents of B5 are "=A65", but when I drag the fill handle...
Actual results:
Contents of B4 are "=A4"
Contents of B5 are "=A25"
View 9 Replies
View Related
Jan 17, 2008
I'm using a macro to update individual formulas in a sheet that contains data from external documents. (i.e. ='C:September[Book2.xls]Sheet1'!$AZ$1 + 'C:September[Book3.xls]Sheet1'!$BA$1 ) Every quarter I have to change the column references in this formula (i.e. $AZ$ will become $BD$ and $BA$ will become $BE$ and so on). Also I have to change the September reference to December etc (but I've mastered this already). My current code works well, but requires manual updating:
Dim ColumnReference1
ColumnReference1 = "BD"
Dim ColumnReference2
ColumnReference2 = "BE"
Worksheets("Sheet1").Range("H48").Formula = "='C:September[Book2.xls]Sheet1'!$" & ColumnReference1 & "$1 + 'C:September[Book3.xls]Sheet1'!$" & ColumnReference2 & "$1"
My problem with this method is that I need to automate the updating of ColumnReference1 = "BD" to ColumnReference1 = "BH" to ColumnReference1 = "BL" and so on and so forth. It's handy that the reference shifts across 5 columns, which remains constant. Ideally, I'd like to tell the macro to look at "AZ" then add 5 columns.
View 9 Replies
View Related
Jun 5, 2008
I need a script that will look for all the formulas in a sheet and increase them by a digit.
Lets say one that particular formula is =(A1-A2)/A2*100
I need the macro to change this to =(B1-B2)/B2*100
I have already programmed in a Find/Replace command, but realised that this would only work one time only. I need generic code that will bump them up each time rather than having to hard code the Find/Replace command for every single cell in the book.
View 5 Replies
View Related
Jan 7, 2007
I have formulas in wksheet #1 going down 20 columns (they are all the same formulas). On wksheet #2, I need to understand how to switch all column references in only one column to another (from wksheet #1) to show different sums. Clear as mud? The way I want to do this is by having one cell on wksheet #2 where I change a number from 1 to 20. This in essence would be the column heading in wksheet #1.
Example:
*There are more formulas but for the purpose here I'll use 3 for each Wksheet
In wksheet #1 I have
C24 is =SUM(C14*C15,C16*C17,C18*C19,C20*C21,C22*C23)*12
C55 is =IF(B66=0,"",C7/B66)
C56 is =IF(C11=0,"",C7/C11)
In wksheet #2 I have .......................................
View 9 Replies
View Related
Sep 26, 2007
I have a pivot table which draws data automatically from a database
What I would like it for the customer field of the pivot table to only equal the customers which are present in another worksheet (Column A:A)
View 9 Replies
View Related
Oct 9, 2008
I want to do a search for the amount of people of a certain age in a column, but I want to be able to vary the amount of cells I look in. So first I might want to look for people aged 15 in A3:A35 and then in A3:A55 to see if there is a difference.
Now the optimal way to do this, in my opinion, would be to have a reference that looks like A3:A(B1) and then have the number of the last cell I want to look in in B1, in this case either 35 or 55.
View 4 Replies
View Related
Sep 17, 2009
I'm trying to copy a file from one directory to another directory. However, the source directory, I'd like to have it so it's created from values within specific cells on a Sheet named "PULL".
When trying the following, I get an error permission denied.
View 14 Replies
View Related
Jun 12, 2006
I'm using Excel 2000 and trying to use the datedif function. I've formated 2
columns as date m/dd/yyyy and left the formula column general I'm entering
dates
A1: 1/1/2002
B1: 1/1/2005
I'm entering the formula in C1
=datedif(b1,a1,"M")
I'm looking for the nmber of months between 2 dates
I get #NUM! for a result.
View 11 Replies
View Related
Aug 4, 2009
My macro uses the solver 100 times. Everything is working well, but it's a little bit slow because of all the cell references.
I was wondering if it's possible to use the solver with variables without cell references?
View 4 Replies
View Related
Oct 14, 2008
I'm looking to do something similar to a Paste Special -> Transpose, but rather than pasting values or formulas, I want to paste cell references to the cells that I just transposed.
E.G.
Sheet 1:
A1 = 1
A2 = 3
B1 = 2
B2 = 4
Sheet2:
A1 = Sheet1!A1
A2 = Sheet1!B1
B1 = Sheet1!A2
B2 = Sheet1!B2
This would typically be an easy exercise, but I have a set 205 rows long and 12 columns wide. A little long to do it one by one.
View 9 Replies
View Related
Aug 9, 2009
If I have values in cell B5:B8
B5=0
B6=3
B7=7
B8=10
I want to have a standing formula in Cells J2:M2 that will always reflect whats in those cells. I don't want to use transpose nor do I wnat something as simple as J2=+B5,K2=+B6,etc.
I would like to know if there is a formula that would add the values in a certain row to a cell
For instance:
I want J2 to reflect what is in B5 AND I want K2 To reflect what is in B5 plus a row which would be the value in B6. I have a reason for doing this as I am going to import 120
ranges beginning at a1 to I30 on each sheet while having the sheet I am importing to have these formulas starting at J2.
I tried using +cellnumber+row, but it just gave me the row number and not the actual value in that cell.
View 9 Replies
View Related
May 3, 2006
Here is what I have at present:
At the beginning of a loop, my cursor is positioned on a row. I want to test two cells on that row.
Depending upon the result of the two cells, I want to make the row a certain color.
After that, I then want to move down to the next row, test the same two cells in THAT row, color accordingly and loop again until I reach the bottom of the spreadsheet.
My problem is this:
If I can use a loop that lists various conditions, along with the corresponding statements that color the row accordingly, how can I when finished increment the cell references so that the conditions change to refer to the cells the next row down?
If a loop is not possible, any suggestions you have for solving this problem would be appreciated. I have about 200 rows so am trying to condense my code; this may be hampering my ability to figure out the solution.
View 9 Replies
View Related
Aug 8, 2007
I am trying to code the following in VBA. Excel Cells have formulae like: '=+BZ165-BZ163-BZ162-BZ160-BZ159-BZ157-BZ153'. Now I want to write code in VBA which will be able to give me the individual cells referenced in this formula: BZ165, BZ163 etc. These names can be stored in individual variables or arrays.
I will then use these for further processing. Note in cases where formula refers to data in another sheet like: '=Projects!P49' or data in another excel like '='C:Documents and SettingshoskopDesktop[Annual.xls]Quarterly'!BA$502': I would like to store the path , file name and sheetname in variables/arrays as well.
Any pointers as to how I should approach this problem?
View 7 Replies
View Related
Dec 20, 2013
Lets say I have two sheets titled "dashboard" and "raw data" in a workbook. Cell A1 in "dashboard" should always show the most up to date data from Row 1 in "Raw Data".
I update "raw data" daily, adding a new column to Row 1. For example December 19 would be A1, December 20 would be B1, December 21 would be C1 etc...How can cell A1 in "Dashboard" always reference the newest cell in Row 1 of "raw data"?
View 2 Replies
View Related
May 13, 2007
I would like to reference cells in another tab in my worksheet, but change the orientation.
For example, in Tab 2, I want to make rows A1:A26 equal to columns A1:Z1. Do I have to click back and forth between worksheets 26 times, or is there a way around this?
View 12 Replies
View Related
Dec 2, 2008
I have a macro that cleans up data on one sheet, text-to-columns, flip rows of data, etc. Another sheet references the cells AFTER the data has been cleaned up. However, I can't put the cell references in from Sheet1 to Sheet2 before I run the macro because it breaks the references.
Just a simple example, Suppose cell A1 contains the formula: =Sheet2!B5.
If I go to Sheet2 and run the macro to clean up the data, when I got back to Sheet1, cell A1 contains: =Sheet2!#REF!
The idea is that this is a template, and the user can input aggregate data, run the macro to clean it up, and then go to the other sheet. I can easily create the macro to add copy/paste between the two sheets, but I'm looking for a cleaner way to do this.
View 4 Replies
View Related
Dec 8, 2008
I'm having problems with the MATCH function. If I use =MATCH(A2,'c:myfile.xlsx'!MyRange,0), it works. A2 is the value that I want to look up. 'c:myfile.xlsx'!MyRange is the full path of a range in an another XLSX.
However, if I assign the file name to a cell and try: =MATCH(A2,A3,0). where A3 has the exact same path as the line that work, Excel returns #N/A. I also tried a match on a range in the same tab of the same spreadsheet, and it didn't work. Is it possible to do what I'm trying to do? The file location of the external XLSX is going to change, and I wish I could just update one cell rather than every single cell that contains a MATCH.
View 5 Replies
View Related
Jan 12, 2009
I have a formula that references data on another spreadsheet with multiple worksheets. I have a new worksheet for each month (Jan, Feb, Mar, ...).
How can I copy formulas in series that keep the cell references the same, but change to the appropriate month. So for the forumula below, I want to fill a series down in a column to represent each month.
Right now I have to go in and edit it to change the month to the next month (i.e. change Jan to Feb.)
An example of the formula is below. In this case, I would want to fill the series down a column and have the months update in series but keep the cell reference the same.
=SUM('[New 2008 sales report linked.xls]Jan'!$M$19,'[New 2008 sales report linked.xls]Jan'!$N$19,'[New 2008 sales report linked.xls]Jan'!$Q$19,'[New 2008 sales report linked.xls]Jan'!$L$47,'[New 2008 sales report linked.xls]Jan'!$K$47,'[New 2008 sales report linked.xls]Jan'!$S$47)
View 4 Replies
View Related
Sep 6, 2009
Is there a way of getting the cell references in a formula change following a change in the content of a cell in the worksheet?
View 9 Replies
View Related
Nov 13, 2013
I'm trying to create a hyperlink inside one workbook from sheet1 to sheet2. The main requirement is that I can copy the formula down and it changes accordingly the hyperlink name cell reference as well as the hyperlink destination. I'm only able to achieve a changing hyperlink name.
I found the following Formula to be useful but I can't seem to change the "B5" as it either handles the cell like text or as a reference of the current sheet.
If I try to leave it without the "" Excel tries to get the value of sheet1 b5 and if I use the Address function the Address input numbers don't change either when I copy them down.
View 4 Replies
View Related
