Replacing References In Two Columns
Oct 29, 2009
I have 2 colums like this. And I want whenever there is a reference like this âë. "some word" in column 2, to have the macro look up some word entry in column 1, find the text in the same row in column 2 and replace the âë. "some word" reference with the text found in column 2. (See attached, sheet 1 as it is, sheet 2 as I want it to be).
Sheet 1
another wordâë. "some word"
awordìåôÜöñáóç
bwordâë. "aword"
some wordêÜðïéá ëÝîç
Sheet 2
another wordêÜðïéá ëÝîç
awordìåôÜöñáóç
bwordìåôÜöñáóç
some wordêÜðïéá ëÝîç
View 9 Replies
ADVERTISEMENT
Apr 15, 2005
I have two worksheets, one contains lots of data and the other references this data to form a summary.
The problem is that having set up all this I have found that not all the references on the summary sheet will always reference a cell with data in it and so bring back a value of 0.
Since this summary sheet will be used to enter data into a database I would prefer a blank cell over a 0.
I know I can use an IF ISBLANK to do this, but dont fancy going through each cell and re-writing the formula, so- Does anyone know an easy way of changing all the cell references to include the IFISBLANK statement?
View 6 Replies
View Related
Feb 13, 2007
I have a column titled PA that has several cells with numbers, like 141, 151, 161, 242, 251, 382 etc. Is there a way that I can replace all these numbers in the column using a vba code. For example, replacing all the numbers beginning with 1** to 1 and 2** to 2.
View 3 Replies
View Related
May 29, 2014
I am facing a problem in evaluating a problem. I am referencing from the screenshot of excel file. I want to replace the values of Column-C for which column-A matches with column -G. And, the remaining will remain same.
Capture.jpg
I am also attaching the excel file.
View 5 Replies
View Related
Nov 16, 2009
I've been trying to find a way to square (num^2) a column of data without using references. I have a column of entered data in Excel 2007 and I know that I can manually enter =(num)^2 (num being a real number) for each single cell but I would love to know how to just enter that formula and apply it to the whole column, or just a short cut if available. I've not found anything helpful in the paste special, it would be nice if they had had a "raise to power," and other modes have just copied the number along with the formula. Every number in the consecutive descension are different.
As it stands I have to enter the data, then in another column use the power formula and reference the former column. Annoying when you have to do this more than once. I also realize I could just grab a calculator and do the math before entering into the cells, but this would be a learning experience for me in knowing how to actually do these kinds of tweaks.
View 3 Replies
View Related
Aug 4, 2009
i have a Macro that gets rid of Hidden columns and Rows.
but i kept getting REF# errors.
so i changed the macro to Paste as values before the rest of the macro.
but then my Subtotal's dont work.
macro that only Paste the values of formulas that refer to a hidden cell?
Sub Prepare_Workbook()
Dim lp As Double
Dim wsht As Worksheet
Dim Buttons As Object
Dim Calc As String
Calc = Application.Calculation
Application.Calculation = xlCalculationManual
Application.ScreenUpdating = False
View 9 Replies
View Related
Mar 8, 2014
I have data in sheet 1 like below
Custid loc city
123 us newyork
124 uk wales
876 in mumbai
Sheet 2
custid newcustomerid
123 756
124 394
Outputsheet:
Custid loc city
756 us newyork
394 uk wales
876 in mumbai
So it will check sheet1 custid with sheet2 custid. If both matches it will replace custid with newcustid.if cust id not exists it will load sheet1 recprds as usual.
View 1 Replies
View Related
Jun 14, 2014
I am working on a spreadsheet with multiple tabs. The basic idea is that I will pull some raw data and paste it into my first tab, and then I can refresh all of the other tabs to reflect the newly imported data. I had a problem recently because when I attempted to pull the raw data because the number and order of columns had changed which messed up my cell references.
My other worksheets would contain cell references that said =table1!a1, and I would drag that formula down to have a list of all employee names for example. I would then filter data based on some of the other information in other columns. I was hoping that I could paste the newly exported data into that table and reapply the filters to view the new list of employees. How can I do this even if the order or amount of columns change? This spreadsheet will be used many times by different people so I need to make it scaleable in case the format of the exported data continues to change. I tried to change the raw data into a table and change the cell references to the column name, but it did not work when the order of the columns changed.
View 1 Replies
View Related
Aug 31, 2006
I'm working in a workbook with several sheets, the first two collums of each sheet are =to the first sheet. some times I need to insert a line, but when I did that, I need to type again all formulas or drag the previous ones, and format again the cells. is there another way to do this?
View 4 Replies
View Related
Oct 22, 2009
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
View 9 Replies
View Related
Feb 10, 2014
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
View 1 Replies
View Related
Nov 25, 2007
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
View 9 Replies
View Related
Mar 2, 2009
I am using the dsum formula to sum some values...the formula in B2 is:
=DSUM(BaseSistemasFebrero,"vlfinf",OFFSET('Planes Entidades'!B$1,0,0,COUNTA('Planes Entidades'!B$1:B$49),1))
The Planes Entidades sheet the data is layed out like this: ....
View 9 Replies
View Related
Feb 4, 2008
I have set up a forecasting module for my company, which I update on a weekly basis.
Basically, I centered my forecast on an 8 week average. Using all of the various equations in a regression, the 8 week series of data is used close to 500,000 times for each week’s forecast. What I am trying to do is move the 8 week series (A#:G#) and change it to the next set of cells (B#:H#) without having to do it using a filter and change all of the various instances of the occurrence. Because of the nature of the forecast, I will be "rolling" it forward every week, so to be able to do this all at once each week would save me a bunch of time. I tried using the Find/Replace fn by having it use the * symbol in place of the #...and this worked when I had it Find the data, but when I tried to use it to Replace the data, it reported an error?
View 15 Replies
View Related
Dec 28, 2008
I have series of companies and output ,some values of output are missed how can be replaced by the average of nearst two years values of output or replaced by the following or previous value of output,sample of my data is attached.
View 4 Replies
View Related
Jan 28, 2009
how i would remove telephone numbers in a particular spreadsheet which are preceded with 44 which need to be removed and then replaced with a zero.
eg. 441234567890
View 9 Replies
View Related
Jun 12, 2009
I want to be able to replace the bolded and underlined areas of this javascript i have pasted in a cell with the value located in another cell. This means that those numbers would be replaced by a similar thing located in another cell. how can this be done? The way I would think you would do this by defining that say =b8 (an example of where the data could be coming from is ann excel formula, but not sure how to do this ...
View 6 Replies
View Related
Apr 29, 2009
One of my friend send me a problem. I got frustrated and scold him lot to do work like this but then I tried to work on it. Although my Vb experience is not good enough.
The problem is this that we have different things written in cells in column A like this “SET-EDT SPRAY 3.4 OZ & BODY LOTION 3.4 OZ & TOILETRY BAG “ and in some cells “EDT SPRAY 1 OZ”
Now we want to replace value Oz with value Oz / (Value * 3.75) ml. the below example will clarify the situation: ...
View 6 Replies
View Related
Feb 17, 2010
What it does is to activate the desired worksheet, and for 3 different choices replace what's there with what I want to be there. I put this together a while back, and it's working fine, but I'm sure it can be cleaned up a bit. Any help would be appreciated.
View 9 Replies
View Related
Oct 26, 2009
I would like to set up a worksheet where once an ID number is scanned, the next cell over is populated with that person's name. (i.e. Johnny scans his ID 234567 and in the next cell, "Johnny Smith" is filled in. I have a worksheet with the ID numbers in one column and names in another, I just don't know how to get a second worksheet with a formula that will allow me to do that.
View 2 Replies
View Related
Apr 21, 2009
I need a formula that will replace a dollar amount with an X. In other words...I have 10,000 cels and half of them have dollar amounts in them...I would like to replace them with the letter X without having to manually do it...
View 9 Replies
View Related
Aug 30, 2009
I am a not too good programmer, but I construct chemotherapy regimens for my medical department. They are used to minimise the risk of wrong dosing to patients, etc. Every regimen is an .xlt file, and about a third of them (there are about 100) generate, in addition to pharmaceutical prescription, automatic letters to patients (for those regimens where patients administer oral dosing at home).
These patient-letters have the hospital's logo on them (the logo is a "shape").
However, the problem is that another hospital also wants to use my system. So I will have to replace all these logos with the other hospital's. I would like to do this in an automated way. I have received the other hospital's logo also as a shape.
I have already constructed a data-inserting macro in a separate file. This macro systematically opens each xlt file and replaces the text in key locations according to the file the macro is in (geographical names, etc.).
Is it possible to automatically replace the logo-shapes in a similar way, with these additional facts/wishes in mind:
1. There is always only one type of shape (a logo) in the xlt files.
2. Even though the shapes are exactly the same, it is possible the names are different.
3. The exact location for the shape is different in each xlt file, so I'd like the replacement to get the same top left coordinate as the one it replaces.
I have constructed 2 different files with the same data-inserting macro, each containing one of the logos (so I can change back to my own hospital) and geographic data. When the data-inserting macro is used, I'd like it to identify the shape in the data-inserting file (there's only one shape in this file), copy it, then identify the shape(s) in the present xlt file, and then replace these, in the exact same location.
View 9 Replies
View Related
Feb 9, 2007
can anybody write a macro code for the following: We want to have five values representing operative time in a row with a mean in the sixth position. The hard part is to get a macro that will allow us to put in a new value in the first column and have it shift the other values to the right and dump the existing fifth value and come up with a new mean.
View 9 Replies
View Related
Mar 6, 2014
I'm currently building a large spreadsheet which will require numeric codes to be within certain cells. At present these cells are filled with alphabetical codes and the person using them has little knowledge of the numbers, is there a simple way for them to type in the alphabetical code and it to then auto-replace it with the numberical?
View 8 Replies
View Related
Jun 4, 2014
Have a column of cells (521 rows), on the column each cell contains a group of number
Example:
27, 539, 484, 485, 506, 594, 523, 502, 505, 525, 541, 526, 527, 529, 542, 533
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 530
28, 540, 493, 494, 506, 594, 523, 502, 509, 525, 541, 526, 527, 529, 542, 533
Let's say I would like replace 27 to 163 but when I find and replay the "527" also changed to 5163. How can i filtered out 527 and just change the 27. I tried Match Entire Cell Content, it doesn't work.
View 14 Replies
View Related
Jul 28, 2008
I have a long list of locations in an excel spreadsheet, stating either the country (eg India) or for US locations the state (in a two letter format, eg NY). I need to change all the state location to say "USA". How can I do this, without doing 50 find and replaces? Can I do something based around the fact all the USA locations are two letters, whereas all the others are longer?
View 4 Replies
View Related
Apr 14, 2009
I have a file with some statistics on how agents at work performed. This file gets sent to all of them, but before we send it we change the names for a number, so that they don't know how the other agents are doing (avoiding comparisons). People had been doing this manually, but it's getting really complex as the number of agents is increasing. I know that this can be automatized, but I have no idea on how to do it. A simple formula with an IF statement wouldn't be sufficient. Here's an example of the data. The file that is to be modified to be sent to all the agents looks like this:
View 3 Replies
View Related
Jun 22, 2009
I'm working with a lot of documents where I need to replace numberID:s with words.
I have a table of 2 columns, where each number has a corresponding number that it should be translated to.
For instace:
1 - cpu
2 - fan
3 - bus
Is it possible to use this list to automatically Replace all the numbers in a document with their corresponding words?
(Without having to spend time on manually program some kind of macro)
View 14 Replies
View Related
Apr 23, 2013
I need in every column in every rows (that is in whole document ) change symbol, to, (that is before every comma, I need add back slash ).
View 1 Replies
View Related
Feb 24, 2014
I am currently trying to get a formula to be added into a range after a piece of code is run.
This is because every time my code has finished, the formula somehow changes and I cannot get it to stop changing values.
I have the formulas further down my sheet, without the = so that it doesn't return a value.
In VBA I have tried something along the lines of Range("A1").Formula = "=" and Range("Z1")
Where A1 is the cell I want the formula in and Z1 contains the formula without an =
It has not updated the cells and they still have the error that I am trying to fix.
View 3 Replies
View Related
