VBA Spell Check - Dont Ask To Check Rest Of Doc?
Nov 3, 2008I am using this code
View 5 Replies
ADVERTISEMENT
Spell Check Via VBA
Oct 13, 2008I have is that the code does call the spell-check up and it goes through the motions.
However, when you perform this manually (as in from the toolbar), the spell-check accepts the items as you put in the text bar at the top if you change it.
When doing it via the VBA macro code, it will not accept the user amended-suggestions unless you highlight the (top) text bar area/row/cell to get it to accept some things - otherwise it just accepts the suggestion the checker gives n the section below - not the text you have amended.
Spell Check - VBA Vs. Manual
Sep 26, 2008I have initiated a spell-check in VBA using:
View 14 Replies View RelatedSpell Check When Close
Mar 28, 2008How can I get excel to always perform a spell check before I close the document. I've tried using VBA but it won't execute. (I'm really bad at VBA.) This is what I tried but it wouldn't work:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Cells.CheckSpelling SpellLang:=1033
End Sub
Spell Check In TextBox Using OLEobjects
Jun 6, 2013
I have a set of text boxes in my sheet. I was wondering if there is a way to perform a spell check on the textboxes only (not the cells in the worksheet).
I have tried searching the code on the forum, found some which are using 'MSForms.TextBox', dont know why I am getting error.
How to perform the operation using Oleobject.
Conditional Formating: Spell Check
Jul 29, 2008I am working on code breaking, and am working on trying multiple letter combinations, and was wondering if I could spell check the results and have that identify letter combinations that ARE words.
Spell Check When Close Excel?
Mar 28, 2008How can I get excel to always perform a spell check before I close the document. I've tried using VBA but it won't execute. (I'm really bad at VBA.) This is what I tried but it wouldn't work:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Cells.CheckSpelling SpellLang:=1033
End Sub
Use Spell Check On A Protected Sheet?
Feb 15, 2007Is it possible to use spell check on a protected sheet?
View 9 Replies View RelatedExcel 2010 :: How To Completely DISABLE Spell Check
Feb 28, 2013We're setting up a test for candidates in an Excel 2010 workbook and want to get a sense of their native ability to spell. We'd like to disable spell check for the entire workbook. I've looked in Options>Proofing, even tried removing the dictionary, but haven't found a way to completely disable spell check from working. Is it possible to achieve? We'd settle for being able to disable spelling within a textbox.
View 7 Replies View RelatedConcatenate But Check That Cells Dont Have Zeros
Dec 16, 2008i need to connect some cells, but have to check to make sure cells dont have zeros in them first
example m13 m14 m15 m16
................5......10......0........15
in cell q18 i want it to show this 5/10/15, dropping the zero cell
Code To Not Run Rest Of Macro If Specific Value In Cell - Error Check
May 13, 2013I have a cell built into my spreadsheet that serves as an error check (i.e. returns the word 'ERROR' if certain criteria are fulfilled on the spreadsheet). I'm trying to write something into a Macro that will check this cell and not allow it to run if it states ERROR, returning a dialog box to notify this, is this possible?
View 2 Replies View RelatedMacro To Force Format And Check Barcode Check Digit
Nov 27, 2009My company uses 4 types of barcodes 8, 12, 13, & 14 number barcodes for our products my problem is that I can't figure out how to force the barcode to format properly no matter how somebody enters it if they don't use spaces or put them in the wrong spots, I can't use custom formats because there is 4 different layouts
8 digit should be "#### ####"
12 digit should be "###### ######"
13 digit should be "# ###### ######"
14 digit should be "# ## ##### ######"
these barcodes are in columns L, M, & N also right now 'm using a formula in another cell to verify the barcodes by calculating the check digit and comparing it to the check digit typed the formula i'm using is
VBA Check If A Cell Is Empty - Move 7 Cells Over And Check Again (Loop)
Aug 10, 2012I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
Check Box Controlling Other Check Boxes?
Jul 4, 2014I want to have 1 check box affect 3 others in the following way: check box 1 if checked, allow check/uncheck of check boxes 2, 3, 4 if unchecked, uncheck boxes 2, 3, 4 and do not allow checking check box 1 is linked to D1 which starts with a value of false. cell E1 is if condition to have value 1 when D1 has value of true.
I have attempted to attach an example worksheet.
Test check control.xlsx
Check All Check Boxes With CheckBox
Sep 9, 2007I am creating a userform with 10 checkboxes. The first 9 checkboxes are user options. I want the 10th check box to be a "Select All" option i.e. if the 10th checkbox is checked all the other 9 options are deemed to have been selected.
The way I want the display to work is that if the 10th checkbox is ticked all other checkboxes are cleared. Also if the 10th checkbox is ticked and any of the other check boxes is selected then the 10th checkbox should be selected.
I have tried coding this up but the checkboxes don't seem to operate as desired. I placed some code on the click event for the last option button to set the vlaue for all other buttons to false. This works but the 10th check box doesn't get ticked itself. When I try to code up the other bit I get similar issues.
Uncheck Check Box + Check A Option Button Using Command Button
Aug 20, 2009When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
Check Boxes Macro: Macro That Will Check If The Boxes Are Checked And If Not Ignore Them And If So Run A Certain Macro
Jul 28, 2006I have numerous hyperlinks in cells on a worksheet, next to these I have checkboxes. I am looking for a macro that will check if the boxes are checked and if not ignore them and if so run a certain macro.
View 6 Replies View RelatedCheck If Value Has Already Been Used
Oct 31, 2011Users can start an automatic copying process (active row from active sheet to sheet 2) by simply putting a date in a cell in column K. The activecell.row is copied over.
As part of the copying process, the value in cell D on the active row (the serial number) is copied to sheet 2.
Before this happens, I would like a checking procedure added to the code which will stop the same row being copied more than once, thus avoiding duplicates.
I have tried InStr and also worksheet.CountIf but can't figure this out.
Code snippet below.
If InStr(1, Sheets("Sheet!2").Range("A:A" & lngLastRow), TempRef) Then
Where the value in TempRef (the serial number) is searched for in Sheet 2 col A.
Check If A1=A2, Then If A3=A4, Then If A5=A6
Mar 5, 2008I have a sheet with 2329 rows. Row 1 & 2 should be the same number, then rows 3 & 4 should be the same, then 5 & 6, etc (see example below). This should result in an even number of rows, so either 2328 or 2330. So somewhere in this sheet, I either have a number repeated twice instead of just once, or a number that's not repeated at all. Is there an easy way to highlight where the error is without having to manually scan all 2329 cells?
23059
23059
23069
23069
23099
23099
23109
23109
23128
23128
Check Box Or To Not Check Box
Oct 21, 2009I am trying to create a basic spreadsheet in MSExcel used to collect standard info (Name, address blah blah blah). The people who will complete this will need to classify the people they are listing into groups (Group A, Group B etc. 5 groups total) and each group will be listed on a separate tab of the workbook (maybe this isn't the best way?).
As they enter the people they will need to decide if the person they are adding is to receive the welcome kit. Each company is limited to 50 welcome kits. My thought is to use a check box for them to indicate yes or no on the welcome kit.
Is there a way to display the number of welcome kits that are remaining on whatever tab they happen to be on?
Is there a way to give a clear indicator next to each name that 'yes' has been selected (colored box, text?).
Check For A Value
Mar 4, 2007Is there a VBA function using which i can check for the existence if a particular value on an Excel ?
View 4 Replies View RelatedAt Least One Check Box Must Be Checked?
Jun 15, 2013I am using an array from another application for option buttons. I have attempted to adapt this code for checkboxes but with no success.
VB:
Option Explicit
Private Sub cmdadd_click()
Dim wrs As Worksheet, i As Long, x As Long
[Code]......
Check If Row Is 0 Or Blank
Apr 21, 2014I have a number of rows that contains data (normally numeric):
0 | 0 | 0 | 0 | ... |True
1 | 0 | 0 | 0 | ... |False
0 | 1 | 0 | 1 | ... |False
What's the formula that gives the True/False answers? I could go IF(AND(A1=0,B1=0,etc...),TRUE,FALSE) that gets the results, but can it be done in a smarter method or can it done via array method?
Range Check..?
Nov 20, 2009Is there a formula that I can use to check that all the depths are in a range of 1 to 5. If one depth is say 6 then this must be flagged up
View 4 Replies View RelatedFormula Check And Get
Nov 30, 2009I need two formulas that can do the folowing:
• check whether a cell contains text, if so, then trim all spaces and get result. If it doesn't contain text then set the result as blank.
• check whether THE CELL T13 contains text, if it does then check the adjected cell (U13) if it contains text, if so, then concatenate the two cells with a space between them and remove any other spaces. If the T13 doesn't contain text, the set the result as blank. Also, I have another question: how could I use the counta formula without counting spaces?
Check Out Of Date
Oct 19, 2007what is the vba code to check this conditon.
my excel file .sheet name "abc" . if cell "a3" have any value . and cell x3 values >=cell x10 ,then it show the input box to call new password "1234"
msgbox showned " true password you can work it now"
if user put wrong password .the workbook is cloesd with the msgbox "wrong password" then the application closed exit.
-cell x3 is datetime values "now" to compare with the cell x10 is the datetime "01012009 8:00" to check the outof date of the application
Check Box Toggle
Jun 18, 2008I am working on a sheet in Excel 2007 and am having trouble with Excel toggling with a checkbox. What I want is for a cell to have "A" in it if the box is checked and a "B" if it isn't. The code I have is:
Sub CheckBox6_Click()
If CheckBox6 = True Then
Range("B20") = "A"
Else
Range("B20") = "B"
End If
End Sub
How To Check If Range Contains Certain Value
Aug 17, 2008Is there a way to test if let's say range a1:a10 contains a value of cell b1.
I would be thankful to get the VBA code to do that
How To Check All The Rows And Add To The End
Sep 22, 2008I have a problem with my Excel Sheet, i am trying to write a macro that it checks the ids under the id column
Example:
ID | Ast Code | Ast 1 | Ast 2 | Ast 3
----------------------------------------
Id1 | Ast 1 | 1 | empty | empty
Id1 | Ast 2 |empty | 1 | empty
Id2 | Ast 3 |empty |empty | 1
Id3 | Ast 3 |empty |empty | 1
Id3 | Ast 1 | 1 |empty |empty
Than it must check for the duplicates ids what Ast Code they have, than at the result it must write from the previous one or from the after one take the Ast Code and write it near it..
For Example:
ID | Ast Code | Ast 1 | Ast 2 | Ast 3
----------------------------------------
Id1 | Ast 1 | 1 | 1 | empty
Id1 | Ast 2 | 1 | 1 | empty
Id2 | Ast 3 |empty | empty | 1
Id3 | Ast 3 | 1 |empty | 1
Id3 | Ast 1 | 1 |empty | 1
To Check Whether An Ocx Is Already Registered
Oct 14, 2008how to check whether an ocx is already registered when template is opened in excel?
this is to register an ocx control used in the xlt.