Does anyone know how to use a form checkbox that adds the true/false values to a cell to activate a msgbox when the cell value changes?
I've tried assigning a macro to the checkbox and uses "If not intersect" in VBA but it doesn't work.
What I'm trying to do is assign a value to cell A1 depending on whether the checkbox assigned to cell A2 is clicked and the value of cell A2 becomes true or false.
Thank you to anyone who can help me out. Auto Merged Post;One more thing to be clearer about my question ... I'm trying to do change the value of cell A1 on click of the checkbox assigned to cell A2, meaning when the value of cell A2 changes.
I'm trying to create a dynamic msgbox that will display what data has been updated based on checkbox selections in the userform. I've named my checkboxes as Carey, Keith, and Juliet.
Ideally if only Carey's data has been updated, I'd like the msgbox to say
' Data has been Updated for: - Carey '
If Carey and Keith's data has been updated, I'd like the msgbox to say
'Data has been Updated for: - Carey - Keith '
etc.
MsgBox ("Data has been Updated for:" & vbnewline & _ If CAREY.Value =true then "- Carey" End if & vbnewline & _ If KEITH.Value =true then "- KEITH" End if & vbnewline & _ If JULIET.Value =true then "- Juliet" End if & ")
Measurement in cell A2 need to be with range and C2 also needs to be in range. I need the result E2 to be an ABS value of A2-C2 and if either are blank to show as a blank. Issue is a zero pops in when one cell has data.
In the pass/fail cell is a formula to see if its in range and comes back with pass fail.
I would like to add a drop down that pops up only when a certain answer is given in a previous cell. For instance, if the user picks "Single Door" in cell E2, then in cell E6, I would like a box to pop up that says "HL/HR?" so that in cell E7, they have a drop down & can select either HL or HR. But, if they pick anything other than "Single Door" in cell E2, I don't want a box to pop up in cell E6 to prompt them to do anything else.
During the course of one of my macros running I want it to press the Delete button that pops up? I used to know but can't seem to trip across it. I have attached a screen shot of the Delete button I want to be pressed.
When I run my Excel 2003 macro, the attached message pops up. Is there a way please to modify my macro so that when this Excel message pops up, it automatically selects OK?
i've gotta demo an Excel app in a few days and this never really bothered me, but someone recently pointed out that it can get distracting for the Control Toolbox to pop in and out randomly. the form is being built for use by other staff, and i suppose it would also be distracting for them if the toolbox arbitrarily appeared here and there. is there a way to turn it off?
What I am after is a user form that pops up when I enter ‘Y’ in cells in Column ‘L’ which displays the contents of the cells in that row e.g. if I enter Y in cell L2 a user form would pop up displaying the contents of cells A2 to M2
The A2 to M2 column headers are:-
First Name Surname Code Address line 1 Address line 2 Address line 3 Address line 4 Address line 5 Post code Telephone Comments
The user form can be Read only i.e. I do not need to edit the cells (although that would be good) as it will be used as a source document to input into another application, however, a ‘Print’ button to print the form would be beneficial. The only other button required would be a ‘Close Form’ option.
What is this error message that is popping up when I try to insert a blank row of cells?
"To prevent possible loss of data, Excel cannot shift nonblank cells off of the worksheet. Select another location in which to insert new cells, or delete data from the end of your worksheet.
If you do not have data in cells that can be shifted off the worksheet, you can reset which cells Excel considers nonblank. To do this, press CTRL + End to locate the last nonblank cell on the worksheet. Delete this cell and all cells between it and the last row and column of your data then save."
This excel document we have has LARGE amounts of data
Now, when it starts, I have a popup form asking for password for access for it. The problem is that for one person - AND ONLY THAT PERSON - the VBA Editor window opens and she has to press the "Play" button for it to hide and be able to enter the password to access the application.
The editor is not showing on any other computer. All computers are running Excel 2010.
the following code should determine whether the searched value can be found in more than just one row and than enlist certain values from each of those rows in ComboBox4 using a loop. Then I have a second macro which would assign appropriate values from a Sheet to other text boxes whenever one changes the value of the ComboBox4:
Private Sub ComboBox2_Change() Dim vFind Dim Firstaddress Dim rFound As Range Dim wsName As String Dim SrchRng As Range wsName = Me.ComboBox1.Value With Worksheets(wsName) vFind = UserForm2.ComboBox2.Value Set rFound = .Range("B1") Set SrchRng = .Range("B:B") Option Explicit End With...............................
While trying to run the first macro an Error pops up saying that a variable within the loop is not set. I've got no idea how to fix it
I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.
If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.
I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.
How can I stop my subs from jumping from one to another?
Code: Private Sub CheckBox18_Click() If CheckBox18.Value = True Then Worksheets("TRF").Rows("36:41").Hidden = False Worksheets("TRF").Rows("42:64").Hidden = True Worksheets("TRF").Rows("65:76").Hidden = True CheckBox19.Value = False
How can i hide and unhide one checkbox using another one? Can it be done using IF formula? And also i am using this checkbox to function something else as TRUE/FALSE.
I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
I have created a form that pops up using a macro when the form is opened. It is a simple form that uses optionbuttons in a group to select Intl or Dom.
Problems:
1) How do you get the form to close once a button is selected?
2) The user can close the form without selecting a button (the X at the top).
3) How do you get the data selected onto the excel spreadsheet?
i have been trying to add msgbox to show that if textbox1 and textbox3 are empty than show "please enter i.d or lockern no but if textbox3 is true than run the code or textbox1 is true than run the code.
I am currently setting up a ID/Password function on my spreadsheet. On the main page is the login boxes and an Ok button. When the Ok button is pressed, I have a formula that checks the user ID and Password and if correct, it types correct. Otherwise it types incorrect. This is using;
In one of my spreadsheets users can see the active period on multiple worksheets All have cell references to the 1st worksheet (cell B5). I would like 2 things:
1. If users change one of the reference cells on the other worksheets I would like a msgbox to appear
2. After clicking the msgbox away I would like the "old" cell contents (the referenece) to be restored.
Hi, Please could someone help with the following code. I have 2 sheets 'sheet 1' and 'sheet 2'(hidden). Sheet 1 has a control button that takes you straight to sheet 2, however what I wish to achieve is that before sheet 2 is visible a message box appears if a condition is not met. Something like, if sheet 1 R29 is less than 5000 then msg box appears (I would need about 4 lines in the msg box), if ok'd then sheet 2 appears. If the condition is met i.e sheet 1 R29 = or is greater than 5000 then the msg box does not appear and takes the user to sheet 2.
Is it possible to modify and code not to have the OK button. I need to to be information process only. I have a long macro i need to user to be aware where in the macro run we are. I wanted to use this code... but i do not want to click the OK button i need it to just show that that step is completed etc...
I am trying to have a msgbox come up if there is a path found it will pop up a msgbox for a few seconds then go away. Im trying to avoid the user from having to select anything just simpley telling them the connection is there then go away on its on. The code below is what Im currently using.
Code: If Dir("H:") = "" Then MsgBox "Error: Drive, path or file not found" Else MsgBox "OK: Drive, path or file found" End If
I would like to add a MsgBox letting the user know how many days are left before the Trial Period is up.
Code: Private Sub Workbook_Open() Dim StartTime#, CurrentTime# '***************************************** 'SET YOUR OWN TRIAL PERIOD BELOW 'Integers (1, 2, 3,...etc) = number of days use '1/24 = 1Hr, 1/48 = 30Mins, 1/144 = 10Mins use
Const TrialPeriod# = 5 '< 5 days trial 'set your own obscure path and file-name
[Code] ..........
I was thinking of:
Code: MsgBox "You have X number of days until you Trial Period expires."
But, I don't know how to code the part in Red to register a Count Down from the first day opened to the next.
It may be opened more then once per day. I just nedd a message on day 2nd - 4th day.
If opened on the 5th day, the rest of the code executes, closing the Workbook.
I have several material takeoff sheets and one material SummarySheet in my workbook.
Each material takeoff sheet has a subtotal cell at the bottom of the sheet. The subtotals are added together and the total sum is displayed in a cell on the SummarySheet. At least that is how it is supposed to work. Excel or somebody else arbitrarily changed the cell reference in the SummarySheet formula to call up the cell one row above the subtotal cell on the material takeoff sheets. This little action resulted in a loss of $674,000 and may eventually result in my unemployment. Meanwhile I am sitting here putting out fires.
This is what I would like to do: Place a formula on the SummarySheet or add a Macro that will trigger a warning message box if the total on the SummarySheet is not equal to the sum of the subtotals on the material takeoff sheets. Also would like to have the message box animated or brightly colored.
If(PlateCostsTotals+AppurtenancesCostsTotals+StructuralCostsTotals+MiscellaneousCostsTotalsSummaryCostsTotal MsgBox “Hey, Don’t You Know How to Add”) or an alternate formula that works.
