Measurement in cell A2 need to be with range and C2 also needs to be in range. I need the result E2 to be an ABS value of A2-C2 and if either are blank to show as a blank. Issue is a zero pops in when one cell has data.
In the pass/fail cell is a formula to see if its in range and comes back with pass fail.
Thk 1: 0.095" - 0.105"Pass / FailThk 2: 0.095" - 0.105"Pass / FailParallelism: ≤ 0.0005" 0
What is this error message that is popping up when I try to insert a blank row of cells?
"To prevent possible loss of data, Excel cannot shift nonblank cells off of the worksheet. Select another location in which to insert new cells, or delete data from the end of your worksheet.
If you do not have data in cells that can be shifted off the worksheet, you can reset which cells Excel considers nonblank. To do this, press CTRL + End to locate the last nonblank cell on the worksheet. Delete this cell and all cells between it and the last row and column of your data then save."
This excel document we have has LARGE amounts of data
When I delete a worksheet, via code, a warning pops up telling the user that a data is subject to deletion.
View 9 Replies View RelatedI would like to add a drop down that pops up only when a certain answer is given in a previous cell. For instance, if the user picks "Single Door" in cell E2, then in cell E6, I would like a box to pop up that says "HL/HR?" so that in cell E7, they have a drop down & can select either HL or HR. But, if they pick anything other than "Single Door" in cell E2, I don't want a box to pop up in cell E6 to prompt them to do anything else.
View 2 Replies View RelatedDoes anyone know how to use a form checkbox that adds the true/false values to a cell to activate a msgbox when the cell value changes?
I've tried assigning a macro to the checkbox and uses "If not intersect" in VBA but it doesn't work.
What I'm trying to do is assign a value to cell A1 depending on whether the checkbox assigned to cell A2 is clicked and the value of cell A2 becomes true or false.
Thank you to anyone who can help me out. Auto Merged Post;One more thing to be clearer about my question ... I'm trying to do change the value of cell A1 on click of the checkbox assigned to cell A2, meaning when the value of cell A2 changes.
I was wondering if there is a way to get rid of this? There are about 300 emails that are going to be sent out and this comes up every time.
Or if there is a way to only do it once no matter how many emails get sent.
Here is part of the code..
During the course of one of my macros running I want it to press the Delete button that pops up? I used to know but can't seem to trip across it. I have attached a screen shot of the Delete button I want to be pressed.
View 4 Replies View RelatedWhen I run my Excel 2003 macro, the attached message pops up. Is there a way please to modify my macro so that when this Excel message pops up, it automatically selects OK?
View 3 Replies View Relatedi've gotta demo an Excel app in a few days and this never really bothered me, but someone recently pointed out that it can get distracting for the Control Toolbox to pop in and out randomly. the form is being built for use by other staff, and i suppose it would also be distracting for them if the toolbox arbitrarily appeared here and there. is there a way to turn it off?
View 2 Replies View RelatedWhat I am after is a user form that pops up when I enter ‘Y’ in cells in Column ‘L’ which displays the contents of the cells in that row e.g. if I enter Y in cell L2 a user form would pop up displaying the contents of cells A2 to M2
The A2 to M2 column headers are:-
First Name
Surname
Code
Address line 1
Address line 2
Address line 3
Address line 4
Address line 5
Post code
Telephone
Comments
The user form can be Read only i.e. I do not need to edit the cells (although that would be good) as it will be used as a source document to input into another application, however, a ‘Print’ button to print the form would be beneficial. The only other button required would be a ‘Close Form’ option.
I have an Excel file in Shared Mode...
Now, when it starts, I have a popup form asking for password for access for it. The problem is that for one person - AND ONLY THAT PERSON - the VBA Editor window opens and she has to press the "Play" button for it to hide and be able to enter the password to access the application.
The editor is not showing on any other computer. All computers are running Excel 2010.
the following code should determine whether the searched value can be found in more than just one row and than enlist certain values from each of those rows in ComboBox4 using a loop. Then I have a second macro which would assign appropriate values from a Sheet to other text boxes whenever one changes the value of the ComboBox4:
Private Sub ComboBox2_Change()
Dim vFind
Dim Firstaddress
Dim rFound As Range
Dim wsName As String
Dim SrchRng As Range
wsName = Me.ComboBox1.Value
With Worksheets(wsName)
vFind = UserForm2.ComboBox2.Value
Set rFound = .Range("B1")
Set SrchRng = .Range("B:B")
Option Explicit
End With...............................
While trying to run the first macro an Error pops up saying that a variable within the loop is not set. I've got no idea how to fix it
I have created a form that pops up using a macro when the form is opened. It is a simple form that uses optionbuttons in a group to select Intl or Dom.
Problems:
1) How do you get the form to close once a button is selected?
2) The user can close the form without selecting a button (the X at the top).
3) How do you get the data selected onto the excel spreadsheet?
The merged Cell B6:G6 will receive a ten-digit number followed by a dash and then one or more numbers. (For example: 1234567890-123)
Cell B15 will then receive data shortly afterwards. I already have a validation macro for this cell which allows either 'I' or 'I I I'.
Upon exiting Cell B15, merged Cell B16:H16 needs a macro which will check Cell B15 and if it contains 'I', Cell B16:H16 will display the data from the ten-digit number entered in Cell B6:G6 minus the first five digits. (For example: 67890-123)
Now the data in Cell B16:H16 can only be somewhat editable hereafter. It can be erased or replaced with numbers in smaller or greater digit combinations than five before the dash (i.e. 67890-123 can be replaced with 123456-7), and digits can be added after the whole group (i.e. 67890-123 & SEE DWG) without any error messages. But if any five-digit number with a dash and some numbers exist in Cell B16:H16, they must correspond with the number in Cell B6:G6 minus the first five digits.
However, if Cell B15 ever receives a 'I I I' afterwards, all data in Cell B16:H16 must be erased. Cell B16:H16 can never contain data if Cell B15 contains 'I I I'.
Also, if the data in Cell B6:G6 changes later on, the corresponding digits in Cell B16:H16 must change as well, even if there are digits after the whole group.
So here is an example of what a good macro would do for me: ...
I have an Excel workbook which contains data entry fields, which have different types of data validation rules - like Lists, Date, Whole Number.
I do not want end users to remove these data validations as well as the formatting of these cells by doing copy/paste. So, I have implemented techniques mentioned in the following post, and elsewhere - to override the paste functionality and implement PasteSpecial values automatically.
[url]
To keep it simple, I'm only supporting pasting a single cell at a time.
Now my problem is this:
Doing the PasteSpecial values programmatically doesn't prevent the user from pasting values in the cell that violate the data validation rules. So, I can paste a string into a cell having data validation as Whole Number, or a invalid string into a cell having data validation as List.
The following post just suggests disabling paste whenever data validation is present:
[url]
But I would like to allow the paste operation if the value being pasted is a valid value for the cell's data validation.
I want to do (seemingly easy task) of getting a price from a code, from a code sheet.
EXAMPLE:
Sheet1 (Log sheet)
A1 = "Code456"
A2 = $? <- This needs to be found.
Sheet2 (Price Sheet)
A1=Code123 B1=$1
A2=Code456 B1=$2
A3=Code789 B1=$0.50
Etc, and so on...
What I want to do is basically (without using macros):
"If A1 = sheet2:A1, then
A2 = sheet2:B1, halt. , ELSE,
If A1 = sheet2:A2, then
A2 = sheet2:B2, halt. ELSE,
So on and so forth..."
I thought there might be an easy way to do it with some sort of 'double sided' data validation drop downs or OFFSET function but I cant figure it out.
I wondering if it is possible for a macro to recognise whether or not there is text in an adjacent cell, and if there is, then to copy data from another adjacent cell.
For example, because there is data in C2, data from A2 has been inputted into B2. And any blank cells are left alone.
a
b
c
d
e
ref1
(cell A2 data here)
DATA
DATA
DATA
ref1
I have been wracking my brain around how to put this formula together.
Is it possible or it can't do more then 1 cell at a time?
Here is an example:
If F1= button request and E1= Scoring then OK (take no action) also i want to add that Folder in F and Corrupt in E would = OK
If it doesn't match to highlight the cell in red
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedI am looking for a way to do what i would call a dual vlookup.
i have some data in a number of sheets and need to do some consolidation into a summary sheet. problem is, not all the sheets have data in the same columns and rows but all the data is the same.
what i am trying to do is something like
vlookup("a",sheet2!A:M,***need to put the column of the data here***,0)
i cant just put in the column number because it changes on each sheet, need some way to do another lookup there, like an hlookup or something, so that i could lookup which column contained 'sales' and return that number so it can be put into the vlookup.
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
I have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
Looking for a formula to accomplish the following:
I'm trying to populate cell A31 on a worksheet titled "VolumeTotals" with the data in Cell E23 from a worksheet titled "CurrentCustomers" if the merged cells F3-F22 on worksheet "CurrentCustomers" are equal to the word "Contract".
I want find the data in some rows that same with one or more cell and automatically fill the data. And for more details, I have attached the examp file (Examp.xls).Antoni
View 3 Replies View RelatedI have a bar chart that was made from table 1 which has the value in it. I have another table, table 2 that has the name corresponding to the value in table 1. I want to color data points in a bar chart with a different color for each name I have in table 2. I also want to give a data label in the data points with the value I have in table 2 instead of the original data label from table 1. Is it possible to do it?
View 3 Replies View RelatedI am using Excel 2010. I am a novice user.
I have a lot of data to filter / sort. I want to initially to create a filter for a column of data - which has the format similar to hierarchical paths to files. The data is a mix of text/numbers. e.g.
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_254__5_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_253__5_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_255__5_0/d
[Code] .........
Doing an alphabetical sort of this date would return the following order. As you can see while each strings in unique - there are many instances where they are simialr - if you ignore the unique numeric values at the end of the string.
pathA/path_123/path_456/data_out_reg_0_0/d
pathA/path_123/path_456/data_out_reg_17_0/d
pathA/path_123/path_456/data_out_reg_4_0/d
pathA/path_X/path_Y/path_Z/lso0_rxs_reg_230__6_0/d
[Code] ......
So what I want to do is to create a filter for the strings - but ignoring the numeric bits at the end i.e.
reg_[0-9]+_+[0-9]+/d
The strings are obviiously of varying length and the number of hierarchical paths is different, so I can't split string on "/".
Similarly folder paths names can contain "_" so can't split string on this either.
As I don't know how many "/" or "-" instances there will be in the string I don't believe I can use the find function. Also as the amount of number will be different i don't think I can use =right(a1,X) either.
I may be able to search for the pattern above - as this is probabay unique - so maybe it's something like the following pseudo code:
Function GetString(txt As String) As String
With CreateObject("VBScript.RegExp")
.Pattern = "reg_d+(_)+d+//d"
GetString = .execute(txt)(0)
End With
End Function
If I do require VBA code - how do I then use this for creating a column filter? Or will I have to extract the filtered data first from the column (and its associated row data) into another worksheet to use?
Once I have the filter in place I want to create tables using the filtered data - so for example each column value above has a lot of associated data values in each row e.g
26 pathA/path_123/path_456/data_out_reg_0_0/d
32 pathA/path_123/path_456/data_out_reg_17_0/d
8 pathA/path_123/path_456/data_out_reg_4_0/d
So my table would show the name "data_out_reg" and the range of values 8-32
I have 2 sheets in 1 document 'April Events' & 'Event Staffing' and I need to do the following
Basically, If 'April Events C5' contains any data, 'April Events D5' gets filled with the data value from 'Event Staffing G5'. If 'April Events C5' is blank, 'April Events D5' would be left blank. If 'April Events C6' contains data, 'April Events D6' gets filled with the value from 'Event Staffing G5' or left blank. If 'April Events C7' contains data, 'April Events D7' gets filled with the value from 'Event Staffing G5' or left blank e.t.c
e.g 'Event Staffing G5' = £12.57. On 'April Events' (C5=12, D5=£12.57) (C6=191, D6=£12.57) (C7= , D7= )(C8=1, D8=£12.57)
Is there a function/formula to do this?
I would like to be able to sort the data in this one cell alphabetically without retyping the data .ie use a sort function but only for a cell.
For Example cell A1 contains Chris Brown Andy
No commas there. Names are seperated only by spaces.
What function should I use in order to get Andy Brown Chris ?
I have a spreadsheet full of data and I need to extract only those lines of data which can be identified by the last three letters in a cell. I am adding an example spreadsheet which highlights the rows I am trying to extract based on the contents in column B but only where column B ends in KY.
Example data extract requirement.xlsx‎
see sample file, i need a formula to do like B column,
I WANT MAKE LIKE B COLUMN, COMPARE A COLUMN DATA IN C,D COLUMN AND ALL DATA SHOULD BE IN B COLUMN..