Checkbox : Married, Widows, Single Checkbox Is Selected
Feb 25, 2009married, widows, single checkbox is selected
macro solution
good work.
ADVERTISEMENT
Stop Checkbox Sub From Jumping To Other Checkbox Subs
Apr 16, 2014I have 3 checkboxes; when one is checked, a set/range of rows should be visible. Only 1 checkbox should be checked at a time.
If checkbox 18 is already checked, and checkbox 20 is then checked, I want the first checkbox unchecked and the rows for checkbox hidden.
I'm using the following code. It works great as long as I check and uncheck the same box before attempting to check another box. But if Checkbox18 is already checked with its rows showing, and I then check checkbox20, the checkbox20 sub runs and as I step through, it jumps to sub checkbox18.
How can I stop my subs from jumping from one to another?
Code:
Private Sub CheckBox18_Click()
If CheckBox18.Value = True Then
Worksheets("TRF").Rows("36:41").Hidden = False
Worksheets("TRF").Rows("42:64").Hidden = True
Worksheets("TRF").Rows("65:76").Hidden = True
CheckBox19.Value = False
[Code] .........
Check If Any Checkbox Is Selected
Nov 14, 2006I have a spreadsheet that I use for people to make requests.
They can only select from the dropdown menus or the check boxes in the spreadsheet. Some fields are required.
I have a button that they click on to save the workbook.
When they click on it a macro checks if all required fields are completed. If they aren't, The user receives a Message box asking them to complete all required fields.
The problem I'm having is with 5 checkboxes each linked to a cell (B11:B15).
The user can check any or all of the boxes but they need to select at least one.
how I can check if the user selected at least one and if not then I would display a Message box asking them to select at least one?
Here is my code ...
Display Checkbox If Another Selected
Dec 2, 2007In an Excel user form, I want to display a checkbox only if the user selects another checkbox.
View 4 Replies View RelatedReceive A Message If One Of 3 Checkbox Are Not Selected?
May 31, 2014I would like to ask regarding checkbox checking. I have 1 master checkbox and 3 sub checkboxes on the userform, and my target is that if the master checkbox is selected then I want to receive a msg if one of 3 checkbox are not selected when I hit the "Confirm" commandbutton.
View 3 Replies View RelatedCopy And Paste Selected Checkbox
Mar 17, 2012I was asked about if i can copy defined cells when i checked its checkbox by using vba button , and another button in another book to paste those cells .
Mention that i may select more than one checkbox in copying and when i would paste these checkboxes , they would be in queue.
How To Have Only One Checkbox In A Group Of 3 Selected At A Time
Mar 23, 2008I have a spreadsheet that consists for 30 rows of groups of three checkboxes on each row. I want to have only one checkbox per row checked at a time. If the user checks one box while another it already checked then I want that checbox to be unchecked.
I want checkboxes to work like groups of option buttons. Actually, option buttons would be fine but with option buttons there is always one clicked but I need them all clear until the user clicks one. They will start off clear but if the user clicks one by mistake there is no way that I know of to clear it again. Checkboxes will clear again if you click it again so I thought I would use them.
how to have a group of three option buttons or checkboxes that will begin unchecked and be able to uncheck all three is one is checked in error,
Ensure Only 1 OptionButton Or CheckBox Selected
Aug 22, 2008I have a workbook containing several sheets, each sheet has a large number of ActiveX check box controls on it.
The controls are presented in groups of three to capture responses to a question (Y/N/NA). If one of the three check boxes is set to True, the other two associated check boxes must be set to False.
What I want to do is avoid having to have an On_Click event sub for every single check box.
I have written a function that will handle updating the related check boxes but I am unsure how to call this function, passing it the name of the clicked Check Box whenever any check box is clicked.
Here is my current code with an On_Click event being used to call the function:
Private Sub chk100_01Y_Click()
' Want to replace this with a dynamic sub that will be invoked
' when any Check Box is clicked and pass the name of that Check
' box to the function
Call Update(ActiveSheet.OLEObjects("chk100_01Y"))
End Sub
Counter In Userform - Increment If Checkbox Is Not Selected
Oct 17, 2011I currently have a user form and am trying to make a counter to that will increment if the check box is not selected, but will not increment if the check box is selected.
I am assuming I could use an if then statement for this, under the command_click OK. but I cant get it to work.
Only Allowing 1 Checkbox A Time To Be Selected On A Page
May 30, 2007I have up to 6 checkboxes on a work sheet but I only want one of them to be allowed to be checked at any given time. Is there a way to make sure this happens? As an example if the first check box is marked and then the user checks Checkbox4 checkbox1 would automatically be unmarked.
View 6 Replies View RelatedSum Multiple Checkbox Values In Single Cell
Jul 1, 2014I have an assigned value of 10 to each checkbox that is checked. If the checkbox is selected I want to automatically sum the totals in a cell on my active sheet. Checkboxes are activeX placed directly on a worksheet. I currently have a work around but considering the number of checkboxes I have, coding is going to be a nightmare as I would have to code each one separately. Right now I am summing each box on another sheet and linking the summed total back to active sheet.
[Code] ....
I would like to do all check boxes with one code and sum the total in the active sheet in cell "I7". The set of checkboxes is 1 to 26.
Hide/Unhide Checkbox Using Another Checkbox
Dec 14, 2008How can i hide and unhide one checkbox using another one? Can it be done using IF formula?
And also i am using this checkbox to function something else as TRUE/FALSE.
Copy Range And Paste Depending On The Selected Checkbox?
May 30, 2014Im looking for a macro that can get a cell RANGE, the data in the RANGE will be copied then if the checkbox is selected it will copy the same data in the RANGE and add the selected checkbox in next column
I have column A and Column B < this is my selected range
Capture1.PNG
I will have a form that has checkbox and buton.
When all the checkbox is selected. when the button is click. the result will be.
Checkbox Vba: The Amount From The Subtotal Cell Will Auto Go To The Cell Next To The Checkbox
May 9, 2006I have been using different keywords to find what I need. I have 3 checkboxes: cash, amex, other. I have a subtotal cell. When the appropriate checkbox is checked, the amount from the subtotal cell will auto go to the cell next to the checkbox. Is this VB?
View 6 Replies View RelatedVBA - Displaying Values In Multiple Lines If Multiple Checkbox's Are Selected
Sep 10, 2012In my userform I have a list of check box's that can be selected. Currently if more than one is selected, they will appear in the spread sheet in the same line one after another with a space between them. How do I make it so they either appear with a comma appearing after each, so the next value appears on the next line below or most perferably the cell turning to a drop down list with the values?
Current code
VB:
If CheckBox1.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox1.Caption
If CheckBox2.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox2.Caption
If CheckBox3.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox3.Caption
If CheckBox4.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox4.Caption
If CheckBox5.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox5.Caption
If CheckBox6.Value = True Then ws.Cells(iRow, 2).Value = ws.Cells(iRow, 2).Value & " " & CheckBox6.Caption
Spreadsheet current cell appearence if all 6 are selected ' Chinnook EH101 Lynx Puma Sea King Fixed Wing'
Required appearence:
Chinnook
EH101
Lynx
Puma
Sea King
Fixed Wing
Allow Only One Checkbox To Be Used At A Time
Jul 6, 2013On the attached Dynamic chart I have attached there are 3 checkboxes to display certain data. My issue is this, if I click the outside checkbox and the ISE checkbox at the same time that is OK, it gives me a comparison of the two data sets in a bar chart. Perfect. If I click just the total checkbox it gives me the total info of the outside and ISE, again perfect.
But, If I click all 3, it doubles all the numbers because total is total and outside + ISE also equals the total.
My Question,
-Is there a way to lock out a checkbox if another is active?
if 1 then no 2 or 3. if 2, 3 is OK but 1 is not. if 3 then 2 is ok but 1 is not?
-If it can't be locked can it do something like; If #1 has a check and you try to enter #2 a red error message could come up saying these two choices together the data will be inaccurate. I'm thinking this might be done in conditional formatting.
If option one is doable and easy, is it also possible to have an error message like in my second idea so people will know why they can't click that second box? This would be my preferred fix but I am open to any other option you may have to accomplish this.
Turning On A Checkbox
Apr 13, 2008I want to turn on (tick) a check box from within a macro.
Checkbox Reference...
Mar 11, 2009Checkbox reference. I am using the following code
View 4 Replies View RelatedSelect All Checkbox
Oct 28, 2009I have 20 check/tick boxes on my worksheet (CheckBox1-20), each of the 20 tickboxs has its own linked cell A1-A20 - I wish to have another checkbox (checkbox21) that, when ticked will tick all of them.
Also, if unticked it will untick the 20. I'd like this to be a kind of "onclick" command - so that if I wanted to tick 5 of the 20 on their own, the "master" tick box won't interfere with this. If a command button is easier to code than this is just as good.
I've been looking online on on here for the last 2 hours with no joy, not even getting close.
I am using Form Controls rather than ActiveX controls.
Check The Value Of A Checkbox In VBA
Jan 7, 2010I'm trying to check the value of a checkbox that I created in my workbook, but both of the if statements below say "Object does not support this property or method"
View 6 Replies View RelatedCheckbox In RibbonX
Jul 13, 2012I have a RibbonX checkbox that I have added to my ribbon. I am able to attach code to the OnAction callback and when the user clicks the box, the code executes properly. Now for my issue. How can I change the checkbox from checked to unchecked and vice versa within VBA?
My situation is this:
I store a list of employees with certain elements such as start date, department, title, etc. in a table. One of the fields is Inactive which shows whether they are active or inactive. I may want to see all the employees, or just the active ones. My checkbox will allow the showing of both inactive and active employees. The user may wish to save the default setting for this and so I have created a table that holds a Boolean True or False for whether to show inactive employees or not by default. The checkbox always shows unchecked by default when the workbook loads, and I want to change the textbox's checked state based upon the value in the table.
Checkbox Event
Dec 10, 2006I need to have a check box, that when it is checked the user must fill in a cell.
View 9 Replies View RelatedSet Checkbox In The Next File
Aug 25, 2009Create a macros, which sets any checkbox in the next excel file
fist link
http://narod.ru/disk/12388811000/car_test.xls.html
or another link of the same file
http://rapidshare.com/files/271305333/car_test.xls
I can't find the name of any checkbox.
Disable Checkbox In VBA
Oct 6, 2009I have a sheet with a number of checkboxes, and I need to conditionally enable/disable some of them.
For example, if the user checks Box1, then the question for Box2 becomes relevant and Box2 becomes available. If Box1 is unchecked, Box2 needs to be unchecked and disabled.
Use Of Checkbox On Userform
Nov 2, 2009Can it be made in VBA as follows:
I have made a userform with the initialize routine. On this there are checkboxes which I would like to be selected for a YES.
When the YES (checkbox) is being selected I than would like to see in the active userform an already made and "hidden" textbox to enter a value for confirmation of a quantity to order.
I have been loking for some sort of Private Sub Userform Change() routine, but can not find this type of routines
Checkbox At Chart
Dec 8, 2009i want to create a chart ,the chart have a checkbox beside it.
so i can check which line to display....
example
test1 (group112data,group113data)
test2 (group112data,group113data)
then the chart selection is to select 1 then it will diplay group112 result (test 1 and test2),this is to make comparison
can i do it for normal chart?
or must use pivot chart?
Refer To A Checkbox Value By Vba
May 10, 2007I have a check box whithin a worksheet. This CheckBox doesn't have any linked cell, and doesn't have any macro asigned. know I would like to refer to the value of the checkbox by vba kind of: ?ActiveSheet.Shapes("CheckBox1").value=true 'from the vba's inmediate window
View 4 Replies View RelatedSelect All Checkbox In A Sheet
Dec 27, 2013I have a sheet that have 100 checkbox. i want to select(not check) all checkbox for change their property.
How can I select all? (by macro or other way)
How To Check If Checkbox Has Been Right Clicked
May 14, 2014I have a userform1 with textbox1, checkbox1, checkbox2, checkbox3 and checkbox4. What i want to accomplish is
[Code]....
How To Change The Properties Of A CheckBox Using VBA
Aug 4, 2014I am trying to use VBA to change the caption of checkboxes in "Sheet 2" when I change the value of a cell "A1" in "Sheet 1".
This code is working:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
Worksheets("Sheet 2").CheckBox1.Caption = "New Caption"End Sub
But there are 6 checkboxes in Sheet 2 and I would like to do something like this:
Private Sub Worksheet_Change(ByVal Target As Range)If Intersect(Target, ActiveSheet.Range("A1")) Is Nothing Then Exit Sub
For i = 0 to 5Worksheets("Sheet 2").Control("CheckBox" & i+1).Caption = "Box" & i+1Next iEnd Sub
This doesn't work.. So I guess the Control-function is wrong.
