i have a column of data, and from that list i want to choose the lowest value grater than a reference value.
for example
the list: 1 2 3 4 5 6
the reference: 2
what function should i use to get the lowest value grater than 2?
Formula to pull the lowest number that falls in Cells I2:L2 and the number must be 0 or Greater. Some of the numbers might be negatives and I am trying not to pull those numbers.
View 3 Replies View RelatedI have to make a table that shows that a if someone purchases
less than 5 items they receive no discount
5-10 items they receive 2% discount
11-20 items they receive 5% discount
21-50 items they receive 8% discount
over 50 items they receive 10%
and it has to be done in a way that the discount rate can be calculated using Vlookup I am struggling to find the best way to write this table. i tried numbering 1 to 50 and writing the corresponding discount rate in the second column but this looks untidy and can't calculate greater than 50 as i am not sure how to write it in the cell so it reads as >50 and not just 50.
I have created a form where people will take a survey, and the responses from that survey will be carried over to another worksheet that will analyze their results.
For each question in the survey, I want them to choose only 1 of 2 responses. For example:
Place and X next to the statement that describes your opinion most often:
__ I prefer to work with others.
__ I prefer to work alone.
The responder will choose either the first or second response, but I do not know how to limit it so they can't answer both. I want a way to limit the worksheet so if they type an X in the first field, they are unable to type one in the second field, and vice versa.
Is there any way to limit the responders ability so that if they choose to respond to the first statement, they are not able to also respond with the second statement, and vice versa, while not affecting the results page that uses the IF formula =IF(sheet1!A8="X","X","")
Any good formula for the following:
Item
Value
Result
[Code].....
The formula needs to first look at each item, select the max value in each group (there are three in the "1" group and four in the "2" group), then return ONLY one result per group. The problem I am having is only returning one value per group. I can write an array formula that returns 1200 or 1000 in each group in every row, but I need to only return one value.
I downloaded a dashboard template that has two tabs of data and I would like to add additional tabs.
I would have to modify the IF and CHOOSE functions?
Formula view:
Capture.jpg
Here's the pretty view:
Capture2.jpg
how I can make a calendar that pops up when the user mouse clicks or tabs/arrows over to a cell so they can choose a date instead of manually typing in the date?
View 6 Replies View RelatedIf you look at "B9" I have created a list of names and when I choose a name their ot hours appear in "K9". Now when I try to do the same in "H9" to bring back there qualification it gives me an error. I also tried to do the same in "M9" for the phone numbers and it didn't work.
View 7 Replies View RelatedThe choose function only works with separate values, but not with a range.
I'm looking for a formula that returns the value in a range based on a number.
e.g. CHOOSE(5, A1:A10) should return the value of A5.
I can program it as a function, but I expect there is a standard formula for this.
I've different rating matrix as below;
more than 90% - " Excellent"
80% to 89% - "Very Good"
65% to 79% - "Good"
below 64% - "Low"
hence if any of the rating falls in a cell need a formula to corresponds that (lets say in cell "A1" if the rating is 85% then result should be "Very Good")
I'm trying to count the number of times "Y" occurs in column H and one of four values occurs in column B. I'm new at writing arrays and what I have so far is:
{=SUM((Main!$H$4:$H$700="Y")*OR(Main$B$4:$B$700="FGZ","FHZ","FLZ","NAV"))}.
This is returning a #VALUE error. A
I have two formula's available for a cell. Its actual value, and a previously forecasted value. The actual value is found using an index formula and the forecasted value is a forecast function. i want to create a macro and link it to a button such that i can change which formula used in the cell accordingly. Is this possible?
View 1 Replies View Related"A1" has a number containing "1000"
I want column "B2" to choose the next number in sequence,(1001) so long as "A2" contains these letters "EHT". if it does not contain "EHT" i dont want excel to insert the number "1001"
But if cell A3 contains, "EHT" I want the next number in sequence to be instered automatically... (1001, 1002, 1003")
how you know which object library to add to references when you want to automate an application?
for example Adobe acrobat.
or internet explorer ( ie).
I know that the .dll for ie id shdocvw (an i know it's explicitly listed under internet controls) but how would i know this is it wasn't listed?
Also, correct me if i'm wrong, but usung the shdocvw.dll will only give you access to the main controls of Ie nd you would need to add a HTML library to do anything use full. How do you know if there are other libraries available can make the 'usefulness' of one library more useful?
I have an Excel file with a column a with names and a column d with numbers. Another Excel file needs the numbers from column d, but only always from the first two alphas, the first two betas, the first two deltas and the first two gammas.
The problem is that the amount of alpha, betas, deltas and gammes vary each month so i cannot choose a specific cell because this will change.
Column AColumn D
Alpha 100
Alpha 200
Alpha 300
Beta 400
Beta 500
Beta 600
Delta 700
Delta 800
Delta 900
Delta 1000
Gamma 1100
Gamma 1200
I am putting together a formula that will be able to choose the calculation. There is a couple of choices with the spreadsheet registry, non registry, and interfile. They have different standards per hour 56, 40 and so on. What I have so far is not working. It is =volume/(time*standard),Volume/(time*standard) with each standard being different to bring the correct percentage. How can I put the two to three formulas in one cell
View 2 Replies View RelatedI have 8 values in a drop-down list that I've created with excel " Validation" function. Each one of these values changes my data in the sheet. I'm trying to set up a macro that will choose each one of these values and print out the sheet when each new value is chosen.
View 3 Replies View RelatedI have = LOOKUP(REPT("z",255),CHOOSE({1,2},"",LOOKUP(C3,{1,2,3},{2,1,0}) )) in cell D3. C3=1 so I expected a result of D3=2. Instead I am getting a blank cell.
View 4 Replies View RelatedI would like a user of my program to choose the destination folder where a .txt file will be saved. I have code below which allows the chooser to browse through folders and choose a file:
Dim f1 As Variant, s1 As Variant
s1 = "#1: Choose the .txt file which contains montly data for the stock price."
f1 = Application _
. GetOpenFilename("TextFiles(*.txt),*.txt", , s1)
txt2.Text = f1
I want the user to browse folders and subfolders like they can with the above code. However the user will select a file path not a particular file. In the case of the code above, the text of Text Box txt2 would be set to the file path (i.e. "C:Documents and SettingsAdministratorDesktop")
I am trying to get the user to choose which disc the file structure should be stored in. Is it posible to get a dialog box which contains all the disc drives? I tried using the GetOpenFileDialog, but it seems I must choose a file. I must only choose Disc Drive.
View 5 Replies View RelatedI have used VBA and can do basic programming, but have no experience with popups beyond msgbox.
I've written a macro that I want to run, but it needs an input. This input is a worksheet name. What I want to do is run the macro, have a popup that has a combo box ask me to select which worksheet I want, either click ok and save that worksheet name to a variable or click cancel and exit the macro.
My Pseudo code looks like this:
Run Macro
Combo Box Popupoption1=sheet1option2=sheet2option3=sheet3If OK ThenSelection = Combo Box choiceElseIf Cancel ThenExit Sub
...Macro Code....
Is there a simpler formula I can use that combines IF and COUNT functions. CountIf, maybe?
I have, let's say, 17 items and I want to choose 5 items out of them. Each time I pick one I am told how many I have chosen. When I reach 5, I am told that I have chosen too many.
So for example I Have three suppliers for a given delivery depending on weight to point "A" to "B"
From To AA pallet AA semi AA fullload BB pallet BB semi BB fullload CC pallet CC semi CC fullload
A B 1 2 3 4 3 4 2 3 4
A C 2 3 4 3 4 5 3 3 4
Given weight parameters that
min max mode
0 < 4 pallet
4 =< 6 semi
6 =< 12 fullload
Now I need a a table like this
Weight From to Mode Cheapest supplier pri
My very large document uses the CHOOSE function in many places to paste content based on the value of a COMBOBOX at the beginning of the document.
My problem is that I now need to paste an entire table for a certain CHOOSE function value. Documentation for the CHOOSE function allows reference to a range of cells such as A1:B12, however, I cannot get it to paste the table in the document.
I am trying to create a spreadsheet for all the different Myers Briggs personality types. I want to pull down on a menu say ISFJ and in the next column will produce how to communicate to a person who has an ISFJ personality.
View 9 Replies View RelatedWhat i need is a 'drop down'-box or another method for choosing an image. And also to change the background in a next time:
for example I need to choose a thumbs up, going ok sign, or a cross. And in a way that if last it was ok, now it's a cross that the background turns orange; and if last it was a cross, and nog a thumbs up, the background changes green.
I'm looking for a easy solution that can be copied to several cells.
my spreadsheet attached, when you open it up you will see the tabs on the bottom, each of those tabs are departments.
This spreadsheet track all the jobs coming through my department, placed by other departments.
On the right hand side of each sheet are print numbers columns, and total hour columns.
at the end of a job I record how many hours the job took or how many dollars it cost. Then the job is close out and that line of information is sent to the archive page.
The archive page is where all the information is stored, print numbers hours and dollar amounts and so forth.
what I would like to do is, set up another sheet within the workbook that would sort all of the part numbers and associate them with hours or dollar cost.
I'd like to have it start the search when a new job is entered and I put the print number into a cell, in any of the department pages.
I am attaching a sample file wherein my requirement is that on clicking one button labelled (actually textBox) "show Data sheets" should display a list of all three data sheets which are hidden and other button labelled (actually textBox) "show Reports" should display a list of all three Report sheets which are also hidden.
Actually users will be able to put data in Datasheets whereas Report sheets contain formula etc and users will not be able to put any data on those report sheets.
Only one sheet should be displayed on the screen ie when user will move to Datasheet1 from Introduction sheet, only Datasheet1 should be displayed.When user will move from Datasheet 1 to Datasheet2 only Datasheet2 should be displayed and so on.
I created a calendar and made it so when I click on a cell, it pops up and allows me to choose the date. When I choose the date and press okay, it is supposed to put that date in the cell. I created the spreadsheet a while back and remember it working. Now however, it doesn't and I can't figure out how. When I made the calendar, I followed some help posted on here and copied the VBA from their calendar since I don't really know VBA at all. Here is the worksheet. It should have the calendar already created via VBA. I just need to know how to have the popup calendar to place the date selected in E5.
View 4 Replies View Related1. I would like to be able to play with it by choosing different categories, sub-categories etc (adding different ones etc.). I tried pivot table but to get this data in pivot table format is a very time consuming task to start with.
2. The sample file has only one month. I get this type of data every month. So have to annualize using other months etc. I could get different months in a column also. So for example column d could have Jan, Feb, March etc. for row of data. But that would mean I will have 1922 * 10 = 19220 rows. And when I update this every month row reference from formulae (If I had formulae) will need to be updated.
I have the flexibility of getting this source data rearranged little bit but not too much flexibility there.