Choose Destination Folder With Vba
Nov 27, 2007
I would like a user of my program to choose the destination folder where a .txt file will be saved. I have code below which allows the chooser to browse through folders and choose a file:
Dim f1 As Variant, s1 As Variant
s1 = "#1: Choose the .txt file which contains montly data for the stock price."
f1 = Application _
. GetOpenFilename("TextFiles(*.txt),*.txt", , s1)
txt2.Text = f1
I want the user to browse folders and subfolders like they can with the above code. However the user will select a file path not a particular file. In the case of the code above, the text of Text Box txt2 would be set to the file path (i.e. "C:Documents and SettingsAdministratorDesktop")
View 3 Replies
ADVERTISEMENT
Feb 22, 2008
I am trying to get the user to choose which disc the file structure should be stored in. Is it posible to get a dialog box which contains all the disc drives? I tried using the GetOpenFileDialog, but it seems I must choose a file. I must only choose Disc Drive.
View 5 Replies
View Related
Apr 18, 2008
I am trying to open a folder so I may choose the workbook to open. I am able to open a workbook but I want to open the folder which contains the workbook.
View 6 Replies
View Related
Apr 14, 2013
I want to fill all a column bottom-up but without specify cells in format "A1500:A2" like
VB:
Range("H1578").Select
Selection.AutoFill Destination:=Range("H2:H1578")
{H1578 have a formula so...}
I have data in the first 7 columns, with a variable(Range) for the first 5 columns
VB:
Dim oRange As Range
Set oRange = ActiveSheet.Range(ActiveCell.Offset(0, 0), ActiveCell.Offset(89, 4))
{The first cell in it is A1}
My question is : How to fill Range("H2:H1578") using my ''oRange'' variable?
I try with OffSet but my code didn't work. I need to do the same with the 6 columns to the right and then plot in a chart.
View 4 Replies
View Related
May 14, 2014
I have alot of project folders on my harddrive.
All in format: I:/12345-costumer-projectname/
The five digits are unique for each project.
I make calculations for these projects using an excel file. In this excel I also type the projectnumber (cell J2)
Now i would like to make a button. When pressed, it checks the projectnumber cell J2, looksup the corresponding folder and saves the excelfile in PDF format in this folder.
I have found macro to find files in folders, but none which do the above.
View 4 Replies
View Related
Mar 15, 2013
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
View 9 Replies
View Related
Apr 21, 2014
I have up to 50 workbooks in one folder with data in a specific range. I also have one workbook which includes additional data, including conditional formatting and dropdowns. I need to copy the desired range from the first workbook in the source folder to the second workbook, then save the latter to my destination folder, using the same name as the first. I need to repeat this process for all workbooks in the source folder.
View 2 Replies
View Related
Jul 23, 2014
I have an Excel VBA Macro for creating/logging drawing numbers. Each drawing belongs to a job number. Each job number has a folder name containing the job number followed by a description (ie 999999 - bracket assembly) for storing drawing pdf's. The job number is only known as a 6 figure number in the drawing creation process BUT for the PDF saving process it is a string value...as my example above
I have to change my process by pre-creating the Job Number folder, then have the macro look for the appropriate folder by searching the parent folder for a sub folder containing the job number (always the first 6 figures).
I want to insert in my macro some code that searches...
The parent folder for a folder containing the job number. The macro value for the parent folder is P:engineeringdrawings (this never changes). the macro value for the job number is iOpenair (it's an entry that is entered as start the macro). Imagine the value for the job number is "999999"...so the search would be for "999999*.*" The code needs to search the parent folder, find the folder name that begins with a six digit number. Capture the complete name of the folder and store that name as a Dim value that I can call up elsewhere in my macro.
View 9 Replies
View Related
Jul 23, 2012
I am creating a document for work that automatically generates hyperlinks to pdf files in a given sub folder. Currently I have a section of code that opens a window to choose the folder location.
Code:
'Prompt user to select a directory
Do
Problem = False
Set ShellApp = CreateObject("Shell.Application"). _
Browseforfolder(0, "Please choose a folder", 0, "c:\")
On Error Resume Next
[Code] ........
What I actually want is to not have the window open, but excel automatically choose the sub folder location.
The directory looks like this
Z:ClientProjectDRAWINGS-2 RECORD COPIESPDF
The xlsm file is stored in the DRAWINGS folder, and I need it to point to the PDF folder.
View 9 Replies
View Related
Jul 18, 2014
I have a list of items in an excel sheet... 500 of them... and there are images for them in an other folder... The problem is those images are in 1000's and I only need those 500 images.. Images are saved as "SKU.jpg eg NS2354.jpg and we have an SKU column in excel as well .. SKU and their images have same name...
Is there any solution to pick up only those 500 images from those thousands of images?
Is it possible to save those 500 images in an other folder?
View 2 Replies
View Related
Apr 13, 2009
looking for some code to save to a destination
destination address is
C:Documents and SettingsstDesktopOJF
now the problem is OJF has folders named 1 to 500
so if cell d5 = 487 it will need to look in the above desination and then open the folder and save it there.
View 10 Replies
View Related
May 14, 2009
I would like to Copy the cell value from A1 into the next available empty cell in a column (in this case sheet2 A) so that I can create a list of values from A1 over time and graph it.
View 6 Replies
View Related
Apr 21, 2007
I am attempting to copy the contents of one workbook (Project) to another (NotesName)
Windows(Project).Activate
Sheets("Matrix Calx").Copy Destination:=Workbooks(NotesName).Sheets("Matrix Calx")
I can't get Destination: or Before: to get the desired result and can't find any info on the variables.
What would be the best way to copy from one workbook to another when the data has to be transfered to the correct/corresponding worksheet?
View 9 Replies
View Related
Oct 17, 2008
I am attempting to create a macro that opens a file named "shrinkage-billing.xls", searches for a variable "PTOSH" in column A, copies the adjacent cell and pastes the data in another worksheet named "Shrinkage Report 2009.xls"
The code follows ...
View 8 Replies
View Related
Aug 30, 2009
I have the following code that was achieved using the macro recorder. The only problem I am running into is that during the autofill command, there are never the same amount of rows to autofill. It could be as few as 5 rows and as many as there are rows on the spreadsheet. When I recorded the macro there were 953 lines, and unfortunately I cannot figure out how to change the specific destination of 953 to a variable destination determined by when data ends. Here is the code I currently have:
View 5 Replies
View Related
Dec 20, 2009
How exactly do I autofill by columns? In this example I recorded a macro and cleaned it up autofilling through E1 but it could be a number up to 50.
View 2 Replies
View Related
Apr 20, 2012
Since you can copy to someplace with one line of code like this:
Sheets(1).Range("A1:Z5000").Copy Destination:=Sheets(2).Range("A1")
is there any way of doing this with formatting, or are things like paste special features only possible by selecting something?
Ie: Values, column widths, formats, etc. Does the copy destination argument only allow simple copying?
View 2 Replies
View Related
May 1, 2012
Is there any way to use the formula below and send only the values?
FY07.Copy Destination:=Sheets("Age Roll Up").Range("A1")
I know that I can copy and paste special, but was wondering if I could tweak the above line in any way to?
View 7 Replies
View Related
Jun 22, 2006
How do I change the destination Cell in a workbook from data entered in a macro?
As an example If I press the command button the first time the Textbox1.value is sent to Cells(11, 5).
The next time I press the Same command button the data Textbox1.value is sent to Cells (12, 5)
Mainly is the rows I want to change not the coloums!
Struggled with this for weeks now which I am sure is a simple issue to code.
I am struggling to make people understand the problem though so I hope this works!
View 9 Replies
View Related
Jul 10, 2006
I am trying to do is when a certain criteria is met I want to pull some information from the net using a web query, and then pasting it into a variable location. I have this code -
Sub Check_Matches()
Dim XLoop As Integer, XPlay_Row As Integer, Loop_Length As Integer
Dim Match_Ref As String, Team_Addr As String, Match_ID As String, Import_Addr As String
XLoop = 1
XPlay_Row = 5
Loop_Length = Range("j1").Value + 1
Do While XLoop < Loop_Length
Team_Addr = "S" & XPlay_Row 'A variable that stores the reference to the cell containing the team ID.....................
View 7 Replies
View Related
Feb 14, 2008
I have the following code to copy a range to another destination. I would like only the value to go to the destination. How to implement this?
Set rngtocopy = Nothing
On Error Resume Next
Set rngtocopy = Range(rngdata(2, 9), rngdata(lngrows - 2, 9)).SpecialCells(xlCellTypeVisible)
On Error Goto 0
If Not rngtocopy Is Nothing Then
rngtocopy.Copy Destination:=Cells(5, 14 + cc + (t - 1) * 3 + (i - 1) * 17)
View 3 Replies
View Related
May 3, 2008
How to create a hyperlink that when copied refers to a new cell?
View 3 Replies
View Related
Jan 9, 2014
Im trying to adapt a formula destination to cell.
I have a formula on cell B2 that is directed do other excel file, It appears like [1.xlsx] 1 being the name of the other file.
What I am trying to is make something like:
cell A2 = 1
and ["A2".xlsx]
so whenever I change the A2 cell, the destination also changes.
View 4 Replies
View Related
Mar 28, 2009
There is a big range of cells with normal numbers (ex. 100, 150 .. etc), but I need to convert them in the following formulas that give the same numbers as a result: for example if the cell value is 100, I need to convert it in =if(iserror(100);0;100) and so on with all other values. Is it possible this to be done automatically for all cells?
View 5 Replies
View Related
Jul 13, 2009
I want to prevent other users when pasting data, to overwrite the formatting of the destination cell.
Since, it is a shared file, i don't want to bother the people explaining use paste special.
I want this to happen automatically.
I don't know VB, and I tried copying what I found in the internet for similar codes, and none have worked. I only copied as they said either in Thisworkbook, and this is all I can do.
I need very easily explained if there is something more than just copying the code in VB view.
View 9 Replies
View Related
Dec 10, 2009
I am sure this is simple but cant get me head around it (tried paste & paste link).. I am wanting to copy formulas in file (A) to file (B) with data source linked in the file (A).
i want is when i copy the formulas to file (B) sheet 2 and it should retain the original path say H:excelfile A[sheet1]$G$1+....xls and source from which the data is being used.
View 7 Replies
View Related
Jul 13, 2011
For a Datastream request table, I need to set up a Data Destination in a blank worksheet. Instead of rows, I need columns with headers. For the rows I can drag-down the cells, but Excel doesn't seem to get the row drag-down:
For rows:
Sheet1'!$A$1
Sheet1'!$A$2
"select & drag-down"
Sheet1'!$A$3
Sheet1'!$A$4
Sheet1'!$A$5
etc.
But if I want to use columns I get this:
Sheet1'!$A$1
Sheet1'!$B$1
"drag-down"
Sheet1'!$A$2
Sheet1'!$B$2
instead of
Sheet1'!$C$1
Sheet1'!$D$1
Sheet1'!$E$1
etc.
It doesn't get that I want to use columns, not rows again.
View 9 Replies
View Related
Apr 29, 2014
I have a existing code which copies data from one 6 workbooks to Main workbook.
Copying data from workbook 1:
It has Header at 2nd row and Data starts from 3rd row.
From A column to AG
Destination workbook: In this workbook. I have Header at 26th row From A to AG copied Data needs to be pasted at 27th row.
And like wise while continuing to copy datas from other workbook it will get added at last.
My code is working fine. But my requirement here is at Destination area.
Now i have moved Header in Destination workbook. Header is at 26th row
From A To Ag to D to AJ
Data needs to get added at bottom of each paste.
HTML Code:
rowofcopysheet = 3
Set copyrng = wkb.Sheets(1).Range(Cells(rowofcopysheet, 1), Cells(Cells(Rows.Count, 1).End(xlUp).Row, Cells(1, Columns.Count).End(xlToRight).Column))
Set Dest = shtDest.Range("A" & shtDest.Cells(Rows.Count, 1).End(xlUp).Row + 1)
copyrng.Copy
Dest.PasteSpecial xlPasteValuesAndNumberFormats
View 1 Replies
View Related
Oct 24, 2008
I have 2 functions that extract SubAddress and SheetName from hyperlink. Unfortunetly, it does not want to work with all links. Sometime I get wrong destination address.
View 2 Replies
View Related
Oct 1, 2009
ws5 and ws7 are defined and working due to other parts of the code already using them. ive copied the syntax from some of my other copy destination codes the only difference here is instead of ("A2:J10") ive got "(Cells(2,1):Cells(iRow, 10)" as the row number for this is variable, and it is calculating the correct value for iRow and iRow2. its probably something stupid im missing but i cant figure it.
View 7 Replies
View Related
