Circle The Cell If The Figure Exceeds 3
Jun 9, 2008
I have 4 columns wherein the details are somewhat given below. Is there any way, wherein the figures under the column "No. of times" can be circled if it goes above 3.
Sheet1 CDEF19DateTimeMin.No. of times20Apr-0821Wed - 09-Apr-20082:42 & 2:494 & 23222Thu - 10-Apr-200803:215123Fri - 11-Apr-200810:27, 7:24 p.m., 7:39 & 7:401, 8, 1 & 12424Tue - 15-Apr-200810:26, 10:31, 10:32, 11:26 & 11:306, 2, 4, 4, 25 Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
ADVERTISEMENT
Feb 18, 2013
I've got a spreadsheet with several rows and the numbers within those rows are totalled up at the bottom. Is there a way where i can highlight the cell within the spreadsheet and it takes it off the accumulative total at the bottom? or something similar to this effect? I just don't want to have to remove figures from this spreadsheet and highlighting will be a good way of seeing what has been done
View 1 Replies
View Related
Jul 8, 2013
I a protected workbook I have the rows and columns indicated below. Each letter in the 2nd row is in a single cell. When completingthe entire form I want to be able to have the appropriate letter circled. I am not permitted to change this selection process to a drop down list - it must remain as formatted.
View 2 Replies
View Related
May 14, 2014
The user enters data into Column E on Sheet1 and i want my code to display a pop-up box when a cell's value exceeds 500. I've tried the two codes below which i thought would work as Excel didn't highlight any breaks when i wrote the code, but no pop-up box is being generated when values > 500.
ATTEMPT 1:
Private Sub Threshold_Check2(ByVal Target As range)
Dim cell As range
For Each cell In ActiveSheet.UsedRange.Columns(5).Cells
If cell.Value > 500 Then
MsgBox "Value within 15% of Threshold"
Next cell
End Sub
ATTEMPT 2:
Sub Threshold_Check(ByVal Target As range)
Set Target = range("E1:E150")
For Each cell In range("E1:E150")
If Target.Value > 500# Then
MsgBox "Value within 15% of Threshold"
End If
End Sub
View 5 Replies
View Related
Jun 19, 2007
i have managed to pull together some code that will deny people adding data into cells if they have 5 of the same entry. the entries are entered in a range and are matched against a single cell outside of the range. heres the
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim greycell As Range, i As Long
If Not Intersect(Target, Me.[grey]) Is Nothing Then
Application.EnableEvents = False
For Each greycell In Target
If WorksheetFunction. CountIf(Me.[grey], greycell.Value) > 5 Then
i = greycell.Interior.ColorIndex
greycell.Interior.ColorIndex = 3 'red
greycell.Select
MsgBox "no cell entry past 5", vbCritical, "ERROR"
greycell.ClearContents: greycell.Interior.ColorIndex = i
End If
Next
Application.EnableEvents = True
End If
End Sub
what i need with is adapting this code to match two ranges as i cant use the worksheet_change event twice. i need it to be as if they were seperate events but are merged together. eg:.............
View 3 Replies
View Related
Oct 14, 2009
I learnt that " " & can combine the text and figure. However, when it comes to a negative numbers, i dont know how to maneouver it. Eg, Cell A1 is USD(50,000.00) and the comment in Cell B1 is Cost is USD(50,000.00). So the function in B1 = "Cost is "& what to put here?
View 3 Replies
View Related
May 25, 2008
If the user selects, annual bill on the calculation type box:
1. Then I need the spreadsheet to use the figure 365 in cell G14.
2. I also need it to times the figure put into G15 by four.
3. It also needs to divide the readings in cells D9,D10,D11 by how many days in cell D7 and them times by 365 and put the answer in E9.
If the user selects bill to date on the calculation type box:
1. I need to copy the figure in D7 to G14.
2. The number in G15 needs to be divded by 90 and times by how many days in cell D7.
View 10 Replies
View Related
Nov 18, 2008
Is there anyway to create a checkbox or anything that if a condition were met, it would circle a value?
Simply put, I'm transferring an expense report from paper to excel, and this report is still entered by accounting from hard copies. The expense report requires that all credit card expenses be circled. Previously, I've created cell sized circles, left them unprotected so that they could be dragged over the credit card expense. I would like to add a checkbox somewhere that says, "Circle Expenses" or "Circle All Expenses".
View 10 Replies
View Related
Apr 4, 2009
Ive been trying to draw a circle in excel, although it only draws ovals - Is there a way to draw a circle in excel?
View 9 Replies
View Related
Apr 6, 2014
I am trying hard to use excel macro to round up cell value to next complete figure when it reaches to 0.6, however it should show the first five "0.1, 0.2, 0.3, 0.4, 0.5 exactly. I am giving increment of 0.1 digit to A1 Cell, it is going well. I am unable to get the next complete figure when 0.6 comes. Is it possible in macro.
View 3 Replies
View Related
Sep 7, 2009
i have a figure of 1000 in cell a1. i want to divide it by a figure in cell b1 and have an answer in c1, or divide it by a figure in c1 and have an answer in b1.
in summary, cell a1 has i figure in it while cells b1 and c1 are empty until i enter a number into one or the other.
View 9 Replies
View Related
Feb 27, 2013
formula which uses 4 cells
the 4 cells are
Cell B2 - this is a set figure which is the initial base figure - currently set to 43
Cell C2 - This subtracts Cell B2 figure (which is 43) from Cell E34 [=SUM(B2-E34)]
Cell E34 - Is a cumulative total of 4 cells [=SUM(E4,E12,E19,E26)] and displays the total.
Cell D2 is a set figure of 49
The formula I am looking for is once C2 reaches zero, I need C2 to remain displaying zero and the remaining figure to be deducted from D2 and displayed in that cell so C2 figure would descend from 43 until it reaches zero. but would then start decreasing D2 whilst C2 would remain static at zero and carry that the remaining figure to D2 which would be deducted from the starting total of 49 and display the figure.
View 5 Replies
View Related
Sep 15, 2014
is there a code to draw a circle? by supplying the center position and the diameter? for example cell "A1" and " A2" are for the center of the circle position and "A3" for the diameter? and whats the code for drawing a rectangular by supplying the starting position and short length and the long length?
View 6 Replies
View Related
May 9, 2006
Am after the code to change a cell colour if the value is a minus figure. There is a formular within the cell that can either equate to an positive or negative figure .. and would like the cell changed to RED if the figure returns a negative answer.
View 4 Replies
View Related
Jan 11, 2007
This is not related to macro - it's an excel question regarding wrapped-around text within a cell (i.e.: text brought onto next line by <Alt>+<Enter>)...
SayI have the following in a cell :
Car<Alt>+<Enter>
Truck<Alt>+<Enter>
Van
and say I want to add a figure (in this example 1A) to the first part of the cell and then another to the second line of wrapped text and so on. How can I split the cell (or lookup the first 'wrapped' line) so that I can then perform changes (using formulas with '&' to combine etc or whatever) so that in the end cell have the following:
Car 1A<Alt>+<Enter>
Truck 2C<Alt>+<Enter>
Van 1B
View 7 Replies
View Related
May 10, 2009
See attached photo. I need a formula to calculate the length of line “c1”. I know the diameter of the circle, and the number of segments. In the photo there are 8 segments but this will change.
View 2 Replies
View Related
May 14, 2009
I've been look for an excel tool to draw venn diagrams with the 'circle' size in propartion to the set (population) sizes and the correct degree of intersect.
Having no luck I've made one myself - it's not pretty (the code sure is ugly) but it get's the job done.
May not work in versions earlier than xl07 - haven't been able to test
So take a look - pull it to pieces all you want.
**Warning**
Attachment contains Macros
**********
Orginal text in thread:
Silly question..but that's never held me back.
View 4 Replies
View Related
Mar 4, 2014
How do I change the color of the zero/0 circle in a radar chart (it runs from -20 to +25)?
I tried to do the adjustment through "format chart area" but seems like it's impossible to do it from there.
View 6 Replies
View Related
Oct 16, 2008
I'm trying to learn about class modules and how to create object that i can manipulate within a sheet.
i'd like to create a simple cirlce object that i can visibley see on a sheet.
is this possible and if so any idea on how i start?
View 3 Replies
View Related
Aug 9, 2013
I have this code and want to place text in shapes (circles).Text changes based on position in data table.
Code:
POINT_1 = Range("E" & j) * 7
NORTH = Range("E" & j) * 7
For j = 23 To 33
Dim CIRCLE_TEXT As String
CIRCLE_TEXT = Range("A" & j)
[Code] ............
View 7 Replies
View Related
Dec 1, 2005
My problem: get a cell to produce a pop up message when it exceeds a
certain value and do not restrict the entry value?
I tried Data - Validation but have had no luck.
The details (much simplified) are these:
I want to multiply B2 x A2 and if the answer exceeds $2499 have a pop up
message appear. Is it possible to have the pop up ocurr while inputting data
into B2 or only after "entering" or when B2 has been reselected.
A B
1 qty unit cost
2 1 $1250
WHAT IS THE METHOD OR FORMULA?
View 11 Replies
View Related
Jan 9, 2014
Creating a formula that would generate a perfect and full circle - see attached picture example. The circle needs to remain centered in the X,Y axis. Also the circle diameter will either be 1, 2, 3, or 4 units large depending on user selection.
View 1 Replies
View Related
Jul 8, 2009
There is probably a simple solution to my problem that I am just not seeing because I cannot believe I'm the only one trying to pull out the number of hours after summing a column of times when the total exceeds 24 hrs. I have attached a sample spreadsheet which has columns for start time, end time and time used (ie end - start time) Originally when I totalled the column of time used, I got 20:27 hrs instead of the correct 44:27 hrs. After doing some research I found out that I had to create a custom format of [h]:mm to get it show beyond 24 hrs. However, now that I can see the 44 hrs and 27 min as 44:27, I cannot seem to pull out the 44 hrs to use it in a calculation of multiplying total time against a charging rate ($/hr) to get a total cost in $. The sum using [h]:mm is in cell F68 and I was hoping to convert this [h]:mm into a number of hrs as a decimal (ie 44:27 to 44.45 hr) by =((HOUR(F68)+MINUTE(F68)/60)) but I get back to the 20 hrs of a h:mm format.
I was originally surprised that I couldn't sum a column of times and get the total time without creating a special format. But I am really surprised that it isn't intuitive to pull out the correct number of hours when it exceeds 24 hrs. I am sure that it's simple because it seems something that a lot of people would have going on in accounting type of spreadsheets. I am going to be doing a lot of summing times coming up and would appreciate suggestions. This forum helped me once before and I hope for the same results!
View 8 Replies
View Related
Sep 23, 2008
I have an excel, in which the user can input values and the sum will be computed for each column (i.e. =Sum (L2:L29)) . I want to alert the user when the computed sum exceeds a particular value, else it shud proceed.
It can also be done at while the save & close of the workbook.
View 10 Replies
View Related
Oct 3, 2009
If I already have lets say 90% on B9 and I try to enter 15% on D9 it wont allow me because of the total being over 100%, but how can I have an alert to say Please enter 10% or less.
Or
If I already have lets say 50% on B9 and I try to enter 20% on D9 and I try to enter 50% F9 it wont allow me because of the total being over 100%, but how can I have an alert to say Please enter 70% or less (the sum of B9+D9).
Can this be done using VBA?
I've attached the file that has the data validation.
View 11 Replies
View Related
Mar 28, 2011
Say I want to create a proxy hyperlink like this:
=HYPERLINK("http://www.google.com/search?q="&B3&...ctive","Search Google")
but the URL address I'm going to use is way too big for the cell (I think max is 255 characters).
View 4 Replies
View Related
Jan 23, 2007
I get my website's log files in a raw text format, delimited with hyphens.
That much I can deal with.
What I am having problems with is the fact that there are over 65,536 lines of data per log file (where each line represents one " event" in the history of the site), and therefore Exel is unable to import the entire log.
View 9 Replies
View Related
Oct 5, 2007
column A4-A9 equals the sum on A10. What I am trying to do is put a formula in H10 that will start out at 35 from no addition, but if cells A10-G10 go over 22 I want it to subtract from H10.
View 5 Replies
View Related
May 7, 2014
I had a Calendar Control (2007) but now stuck using 2013. I have to change all of codes related to my Calendar Control to a Month View Control. Problem is I had 4 command buttons beside my calendar to automatically add value to the calendar:
My Code is in a userform. Standard code for MonthView:
[Code] ....
Basically it was “highlighting” the todays date but if one of the cmd_button was clicked then it would highlight the today’s date plus 15 (making the highlighted date, if we take today as an example: 2014/05/22).
Now with the Month View is there a way to select the exact same thing? I mean I know if I deactivate the “Show Today” in the properties but is there a way to make the selected date to have the “Circle in Red” around the date IF I click on a command button?
View 4 Replies
View Related
Jul 19, 2010
My worksheet ends at cell AG650, and Control-End takes me there. I have deleted all columns and rows beyond that, saved, closed and re-opened.
But the scroll bar takes me to cell AG924500 -- more than 900,000 rows too far...
I tried setting the Scrollarea in VBA and got some unexpected results.
Private Sub Worksheet_Activate()
ScrollArea = "A1:AG700"
End Sub
The elevator bar did not shrink at all, and the visible portion of the worksheet reacted inconsistently, sometimes correctly, sometimes seeming frozen or stopping short of the 700 rows specified, which makes me think there's an Excel bug involved.
I've also tried Hiding the unused rows but get this message:
"Cannot shift objects off the sheet"
So I've gone into VBA and removed all objects using this code:
ActiveSheet.Shapes.SelectAll
Selection.Cut
But with no change at all...
I've also applied several commercial 'Excel tuning' programs, to no avail (FastExcel and CodeCleaner)
View 3 Replies
View Related
