is there a code to draw a circle? by supplying the center position and the diameter? for example cell "A1" and " A2" are for the center of the circle position and "A3" for the diameter? and whats the code for drawing a rectangular by supplying the starting position and short length and the long length?
View 6 Replies
I need a formula (or formulas) to give me the "coordinates" (Column & Row location) of a certain value in a large rectangular range. Intuitively this should be doable with a smart combination of VLOOKUP, HLOOKUP, INDEX, MATCH, ADDRESS and/or CELL functions (maybe in the form of "array formulas") but I can't seem to find the way...
Here is an example of what I need:
I have a large rectangular range (A10:F500), full of numerical values. Then in cell A1 I have one of the (many) values contained in the range, let's say, 3.14159. I need two formulas that give me the following:
a) A formula in cell B1 that tells me in which COLUMN of the range the value 3.14159 is located
a) A formula in cell C1 that tells me in which ROW of the range the value 3.14159 is located
If the range consisted of a single column (or a single row), this would be an easy INDEX and MATCH combination.... but I'm dealing with a *rectangular* range here...
I have a bit of code that I saved as an add-in. The code does a couple things: (1) Creates a right-click button that on action (2) draws a rectangular auto-shape that is the size of any selected range.
The add-in seems to loaded correctly.
However, when I launch a new excel sheet, my intent was to have the code (the right click option) be available whenever I opened Excel.
Is there another step to accomplish this?
Assume you have a rectangular range. Say A1:M18. There are values in some random cells (any number of cells) within the range. The rest of cells are blank. In cell M19 (ie cell below the bottom right corner of the range), I need a excel function that returns the nearest (ie physical location) non blank cell value. I have searched the internet for weeks. The closest formula is the following (see below) but it is flawed as it returns zero if there are values in rows below the row of the nearest cell with non blank...and also zero if there is value in a column greater than the column of the nearest cell with non blank.
Closest formula so far:
INDEX(A1:M18,LARGE(IF(ISBLANK(A1:M18),"",ROW(A1:M18)),1)-ROW(A1:M18)+1,LARGE(IF(ISBLANK(A1:M18),"",COLUMN(A1:M18)),1)-COLUMN(A1:M18)+1).
And the function should be relative not absolute as the range can be extended..but the location of the formula remain same relative to the array size. (ie. always at below the right bottom cell).
NOTE: Ignore the special case where two non blank cells are the nearest. That will not happen.
Is there anyway to create a checkbox or anything that if a condition were met, it would circle a value?
Simply put, I'm transferring an expense report from paper to excel, and this report is still entered by accounting from hard copies. The expense report requires that all credit card expenses be circled. Previously, I've created cell sized circles, left them unprotected so that they could be dragged over the credit card expense. I would like to add a checkbox somewhere that says, "Circle Expenses" or "Circle All Expenses".
Ive been trying to draw a circle in excel, although it only draws ovals - Is there a way to draw a circle in excel?
See attached photo. I need a formula to calculate the length of line “c1”. I know the diameter of the circle, and the number of segments. In the photo there are 8 segments but this will change.
View 2 Replies View RelatedI've been look for an excel tool to draw venn diagrams with the 'circle' size in propartion to the set (population) sizes and the correct degree of intersect.
Having no luck I've made one myself - it's not pretty (the code sure is ugly) but it get's the job done.
May not work in versions earlier than xl07 - haven't been able to test
So take a look - pull it to pieces all you want.
**Warning**
Attachment contains Macros
**********
Orginal text in thread:
Silly question..but that's never held me back.
I a protected workbook I have the rows and columns indicated below. Each letter in the 2nd row is in a single cell. When completingthe entire form I want to be able to have the appropriate letter circled. I am not permitted to change this selection process to a drop down list - it must remain as formatted.
View 2 Replies View RelatedI have 4 columns wherein the details are somewhat given below. Is there any way, wherein the figures under the column "No. of times" can be circled if it goes above 3.
Sheet1 CDEF19DateTimeMin.No. of times20Apr-0821Wed - 09-Apr-20082:42 & 2:494 & 23222Thu - 10-Apr-200803:215123Fri - 11-Apr-200810:27, 7:24 p.m., 7:39 & 7:401, 8, 1 & 12424Tue - 15-Apr-200810:26, 10:31, 10:32, 11:26 & 11:306, 2, 4, 4, 25 Excel tables to the web >> Excel Jeanie HTML 4
How do I change the color of the zero/0 circle in a radar chart (it runs from -20 to +25)?
I tried to do the adjustment through "format chart area" but seems like it's impossible to do it from there.
I'm trying to learn about class modules and how to create object that i can manipulate within a sheet.
i'd like to create a simple cirlce object that i can visibley see on a sheet.
is this possible and if so any idea on how i start?
I have this code and want to place text in shapes (circles).Text changes based on position in data table.
Code:
POINT_1 = Range("E" & j) * 7
NORTH = Range("E" & j) * 7
For j = 23 To 33
Dim CIRCLE_TEXT As String
CIRCLE_TEXT = Range("A" & j)
[Code] ............
Creating a formula that would generate a perfect and full circle - see attached picture example. The circle needs to remain centered in the X,Y axis. Also the circle diameter will either be 1, 2, 3, or 4 units large depending on user selection.
View 1 Replies View RelatedI had a Calendar Control (2007) but now stuck using 2013. I have to change all of codes related to my Calendar Control to a Month View Control. Problem is I had 4 command buttons beside my calendar to automatically add value to the calendar:
My Code is in a userform. Standard code for MonthView:
[Code] ....
Basically it was “highlighting” the todays date but if one of the cmd_button was clicked then it would highlight the today’s date plus 15 (making the highlighted date, if we take today as an example: 2014/05/22).
Now with the Month View is there a way to select the exact same thing? I mean I know if I deactivate the “Show Today” in the properties but is there a way to make the selected date to have the “Circle in Red” around the date IF I click on a command button?
I've recently got a new computer and this problem is driving me nuts.
When I click view!toolbars!drawing, nothing happens. No drawing toolbar appears at the bottom of the screen where it used to be. There's a small "drawing toolbar" icon on the main toolbar, but whether this is depressed or not makes no difference either.
I understand this may be changed in the 2007 version, but I’m using Excel 2000
I want to have 2 cells where I can enter 2 numbers (length & height) so that a grid can be plotted. For example, a big sheet of paper size is length 30" x height 8", if first number is 10" (length) is entered, it will plot 3 lines across 30" (cos 30" divided by 10" equals to 3) and if I enter 2" (height) on 8", it will then cut it into 4". Attached a file for better understanding.
View 14 Replies View RelatedIn my attached sheet I've to find out final result in Column "F" (green shaded). My boss many times a year increases salary by certain percentage (say 30% or 40%) which is given in "E" column. After that I need to adjust it according to Pay Scale given in right side. For example one Executive's salary reaches 19880 after % increase. Now in pay scale we see in executive (row no. 13) it crosses 19800 so his final salary should be next upper value i.e 20600 (if it reached to 20700 after % increase, then his final salary could be 21400). That is final salary should be multiple of designation's increment plus minimum gross salary (Here 800X10=8000+11800=19800, since it exceed by 800, so salary should be 800X11=8800+11800=20600)
So we can either pull data from right side table or we can give formula in "F" column to get the required result.
salary adjustment.xlsx‎
I want to use VBA to update a drawing object's color, such as a circle.
For example, pretend I am counting sheep and I need to know when I have reached the maximum count by the visual aide of a stoplight. The script in my head reads: If the max. count of the sheep is less than 5, then the stoplight is green. If the max. count of the sheep is equal to 5, then the stoplight is yellow. If the max. count of the sheep is greater than 5, then the stoplight is red.
Is there a way to do such a thing on excel and with VBA?
How would i have VBA draw a line between a two ranges? say i have a named range of "start" and another name range "stop". i want to draw a red line between them. how can i do that with code. this is beggining my education for a much larger project I want to do later in the future.
View 9 Replies View RelatedI want to draw circles from 3 points and other geometrical shapes. The points will be given from clicks on the background picture.
View 1 Replies View RelatedAny way to retrieve values from a combobox on a webpage (For my case there are two values in the combobox.) I know how to manipulate the webpage to choose the values in the combobox and so on but i want my user to be able to see the options they have from my userform.
View 8 Replies View RelatedI am having trouble writing a macro that will draw a line relative to what cell is currently selected. I can only get the macro to draw a line in one specific spot.
View 9 Replies View RelatedI have a sheet with 30 textboxes made with the drawing toolbar. The user enters data, then clicks on a button which formats the page to adjust row size to match amount of info. I am having trouble finding the code to store the currently selected textbox in a variable so that I can place the focus back to the same textbox when the macro ends. Can anyone help me with the code to get the active textbox?
View 9 Replies View RelatedI know you can draw a line on a userform by providing the start and end co-ordinate of where you want it, but is it possible to have a UserForm appear on call, with the 1st co-ordinate already set (by the programmer) and the user clicks on some point of the UserForm to indicate where they want the end co-ordinate to be, and that a line would then be drawn to that point ?
View 9 Replies View RelatedI want to draw a (time) line from the top left corner of a cell (say C3) to top left corner of a cell (say i10) in a Macro. Both start and end cells (column & rows) will vary depending on certain input values which I can convert into a cell reference. Line must overlap on both ends by two column widths.
View 9 Replies View RelatedI'm looking to write two small macros that will either hide or show all lines, freeform lines, and autoshapes on a page. In my extreme competence, I determined a for/next loop would be appropriate... but other than that, I can't figure out where to start.
View 4 Replies View RelatedCan we draw tangent to a curve in excel graphs..? If yes if i could have some demo....** this.. I am working on finding rate ** change at an instantaneous point and average rate ** change ie: secant line
View 1 Replies View RelatedI have a worksheet with 27,000+ rows. Item numbers are listed in column J and quantities in column E. The rest of the data on the sheet is not needed. An item number may be listed multiple times. I'm trying to create a new sheet that lists each item number once with the sum of all the quantities associated with that number. The data is sorted so all "like" item numbers are listed in consecutive rows.
View 5 Replies View RelatedI am working on a huge amount of data and want to analyse that data through charts because charts are quick representation of the data and save a lot of time. I got some code from my friend, to read each row in a worksheet and plotted the corresponding chart on the new worksheet each time i.e., each row has one chart which is plotted on new worksheet each time.
But I don't want it to plot the chart on the new worksheet. I want it to plot the chart on the same worksheet. In my case there are always more than 30 rows, so it should draw 30 charts on the same worksheet in which 30 rows are written.
Here is the code which plots charts on the multiple sheets
Code:
Sub LineCharts()
Dim Ws As Worksheet
Dim NewWs As Worksheet
Dim cht As Chart
Dim LastRow As Long
Dim CurrRow As Long
Set Ws = ThisWorkbook.Worksheets("Sheet3")
LastRow = Ws.Range("A65536").End(xlUp).Row
[Code] ....
