Clear VBA Editor Immediate Window
Jan 26, 2008Any way that the VBA Editor Immediate window from within VBA code?
View 9 RepliesAny way that the VBA Editor Immediate window from within VBA code?
View 9 RepliesI am having problems with the VBA Editor freezing at the most inconvenient of times when writing code and then clicking to the Sheet I'm working on, it just freezes up the whole of Excel and it has to be shut down and opened up again.
It seems like a memory problem at first, but there is sufficient memory
( 768Mgs, OS is XP Pro, Excel 2000, 9.02).
The work is not lost becuase I'm able to Save even at PC Re-boot, fortunately.
I've tested on 2 different PC's and the same happens. The only way to avoid the freeze it seems, is before I switch to view a worksheet, is to Save then click off VBA Editor and re-open.
When doing so, another symptom is it seems a huge amount of memory is freed up, ( pardon the terminology)
There is also a message that pops up when re-opening that same workbook that there are Formulas Linked to another workbook, but unable to find any after tediously searching every worksheet by using "Find, Look in Formula" there is nothing found, yet.
This freezing may happen twice a minute whilst pointing the mouse cursor from any VBA Edit window or worksheet and it's getting to a point of repetitiously having to Save, click off VBA Editor, and Click back on again each time I need to look at a respective Worksheet.
When I open my excel file and go to the VBA editor there is a pop up telling me that there is a dll error. So, I can't access none of my code or run any of them.
In the tools menu and references it says : "MISSING : Microsoft PowerPoint 14.0 Object Library". When I unchech this box and close the menu, it checks itself back.
Edit : I have Microsoft PowerPoint 12.0 Object Library also in my references list.
Sometimes I inadvertently remove/hide the menu bar and Icon bar from the VBA Editor. Not sure what I've done and not sure how I get it back.
View 4 Replies View RelatedWhat would be a code to open notepad and paste infomation from column cells A3 to A30 when ever a command button is clicked.
is it possible to remove a VBE project from the VBE editor? This is a project that is opened as a read-only workbook, and then converted into an addin (essentially just to hide the worksheets). It therefore shows in the VBE editor but is in neither the add-ins or workbooks collections. This file is basically used as a source for data for another charts workbook. I need to clear this out of the VBE editor so as to reload an updated version of this workbook every so often.
View 6 Replies View Relatedis there a quick and easy way to rename the Sheets In VBA Editor (they are currently all mixed up), i.e. I have Sheet221 followed by Sheet11 etc. Is there a way to reorganise them so that I get Sheet01 followed by Sheet02 etc.
View 5 Replies View RelatedI have a query in Excel 2003.
My question is:
I have a macro created for my Excel. I have a short cut key to run this macro. When i run the macro, the VB editor is opened where i have written the code. My requirement is, I don't want the VB editor to be opened when i run the macro. I want the macro to be executed but the VB editor should not be visible to the user.
I can't seem to tell if my formula isn't correct in concept, or if this is a known problem with Excel 2000?
I have written a short formula that is pretty straightforward, but is giving a different result in Excel's "Formula Editor" box (when you hit the = button) than is showing in the cell itself. The Formula Editor's result is showing as "TRUE" which is what I believe is the correct value, but the cell itself is showing the "FALSE" result of a different incorrect value.
i have a sheet with lots of macros.
for some reason whenever i run this one specific macro the vba editor screen comes up.. there is no errors. dont understand why it keep coming up.
also when i run this specific macro the first time it works really quickly.. and the next time i run it, the code takes a lot longer execute any ideas why?
Is it possible to check, with VBA code running some sort of "If" function in the background in an open workbook within which the VBA code is placed, whether a user is opening (or attempting to open) the VBA Editor? This should see any attempt being made, whether the user uses Tools>Macro>Visual Basic Editor, Alt + F11 or right clicking on the Excel icon top left to "View Code".
View 2 Replies View RelatedI have made TAB using Custom ID Editor but it is available in particular file how to make appear that TAB in all excel ?
View 3 Replies View RelatedI am working on a report where if an icon or button is clicked it should open rich text editor or text box with current date and time in the box so that the managers can enter their remarks next to them. On clicking submit it should save the remarks and next time when opened it must have previous comments with date and also should prompt todays date for new comments.
View 2 Replies View RelatedI am trying to fill out my yahoo email's 'Compose email' Form using VBA. I have a workbook with a list of email addresses and text messages to be send. I am primarily using getElementsByTagName(), and able to open a new yahoo page, log in, create a new email, populate the addressfields,and subject field.
However, I am not able to write anything in the message editor ( the part where we write the actual message). The following is a part of the HTML code related to the message editor. Please suggest what I should do?
'The following code creates a new commandbar name Visual Basic Editor, which on event delete the VBE module1. How can I tie the built in visual basic editor commandbar to this.
Sub bar()
Set mybar = CommandBars("Tools").Controls("Macro")
Set mycontrol = mybar.Controls _
.Add(Type:=msoControlButton)
With mycontrol
.Caption = "Visual Basic Editor"
.FaceId = 1
.OnAction = "MySub"
End With
mycontrol.Visible = True
End Sub
Function mysub()
With ThisWorkbook.VBProject.VBComponents("ThisWorkbook").CodeModule
.DeleteLines 1, .CountOfLines
End With
End Function
I have a problem with my VBA Editor. I have the Projects Window at the top left of the screen, the Properties underneath it and, normally, the Userform/Code window fillint the rest. However, The userform/code window is not behaving as before. When you try to get one or the other they open in another window whereas I'm pretty sure that they just opened in the same window.
View 4 Replies View RelatedI am having trouble entering all the text in a single line in the Microsoft VB editor (the application that opens when "view code" is selected in Excel.
The code I am trying to enter is:
vUser3 = Array("Login", "CLREL Client Relations Sum.", "CLRMGT Client Relations Mgmt.", "Client Relations Admin", "Sales Support", "Admin Officer", "Admin Support", "Trade Show Mgmt","Client Rel Prof Serv", "Client Rel Imp.", "Sec. Mkt & Inv. Clients", "SALES - Sales Summary", "Sales Admin", "Cross Selling", "Loan Fulfil. Service Sales", "Channel Management", "Corp Div. Mgmt.", "Strategic Sales", "SALN - Sales Northern Region", "SS-Gleason", "SS-Collins", "SS-Hodum", "SS-Pluchino", "SS-Robbins", "SS-Sandbach", "SS-Johnson", "SS-Conner", "SALW - Sales Western Region", "SS-
I realize that this is very long, but the VB editor does not see it all as the same line, and therefore I get a Compile error: Expected: list separator or ). Is there a way to have this all on the same line?
When you create a userform in the vba editor, then go to another module, then return to the userform, you see the userform object by default and in order to show the code you have to right-click on the userform and select "view code".
How can I make the "view code" view the default view for the form in the VBA editor? (i.e. so that when the form is selected, I am presented with the code, not the object).
I have an Excel file in Shared Mode...
Now, when it starts, I have a popup form asking for password for access for it. The problem is that for one person - AND ONLY THAT PERSON - the VBA Editor window opens and she has to press the "Play" button for it to hide and be able to enter the password to access the application.
The editor is not showing on any other computer. All computers are running Excel 2010.
I'm having difficulty integrating two nearly-identical codes into one with Visual Basic Editor. Here is the coding that is leading me to trouble.
[Code] .....
I've been helping another user create a workbook that dynamically adds, renames and deletes worksheets from a "Main Sheet".
I have got the whole thing figured out and running to satisfaction, except...
The macro runs fine if the Visual Basic Editor is open. If the editor is closed while the macro is run, I get "Runtime Error '9': Subscript out of range"
Any ideas what could be casing this? The errors occur when attempting to add sheets.
how to run a userform with a macro that opens the visual basic editor and runs the userform1 in it; rather than using userform1.show.
View 9 Replies View RelatedI have the VB Editor open and am manually activating different workbooks in Excel (with 20/25 modules each), the VB Editor goes through a process of maximising each and every module in the workbook I have selected before I can edit any code or, indeed, do anything in the workbook. This process takes about 8-10 seconds every time I select a different workbook in excel! I have played around with the settings "Full Module View" in the options section of the VB editor, but to no effect.
View 3 Replies View RelatedI have created macros before, but it was a step by step, easy to follow, guide from out textbook. Now I have to create one on my own from these directions.
So my first task was to create a macro that went to a specific worksheet, and made A1 the active cell. I created that macro.
Now it comes to where I have to open the macro in Visual Basic Editor and I am completely lost. I know absolutely nothing about this. This is what it looks like now:
Sub Show_Report()
'
' Show_Report Macro
' Macro recorded 4/25/2007 by *******
'
' Keyboard Shortcut: Ctrl+w
'
Sheets("Jeff").Select
Range("A1").Select
End Sub
So now these are the next directions. "Edit the Show_Report macro in the VBE so that the macro prompts the user for the name of the report to view (indicating that the user should enter "Jeff", "Sally", "Jane", "Jim", and "Harry") and then displays that worksheet. (HINT: You should run the edited macro to make sure that it runs correctly.) Include an If-Then-Else control structure to detect an error if the user enters an incorrect report name. If an error occurs, the macro should display a message box informing the user of the error.
So what Im thinking is I need a code so what when I hit my macro hotkey, it opens up a pop-up box and then I get to type in a worksheet name and it takes me to that worksheet.
I'm having a problem with a macro clearing a formula in a cell. I have the same type of cell that doesn't have the problem but I can't find the difference between the 2 cells or difference in vb that's making it happen. I have to intentionally cause this to happen but don't see why it's happening. Do I need to attach workbook and describe what's happening? I have been copying and pasting from different sources as well as paying to have it created/started but it was expensive(for me) and I make nothing off of it, just use it at work. I am not proficient in Excel or vb but I'm desperately trying to learn as I go so as not to fork out a few hundred dollars again.
here's atleast the vb for the macros:
VB:
Sub clearclientinfo() '
'
'
'
Sheet5.Select
[Code].....
Is there any way I can display line numbers against the code in the Visual Basic Editor?
Or can I see in the current line number in the status bar?
or GoTo Line number?
Is there a way to make a macro fire when you close the VB editor. For example,
I would like one of my pre- recorded macros to start as soon as I close the VB editor.
Can a event be triggered when the Visaul Basic Editor command button is clicked in Excel?
I only want to change some Visual Basic Editor (VBE) font settings on the active workbook, but whenever I do so within the Editor tab of the Options dialog it changes the VBE font settings for all workbooks.
Is it possible to change just the active workbook VBE font settings or do these settings reside in some *.ini file that once changed, globally changes the setting(s).
I am Generating Excel file with Macro using my asp.net (c#) application.
I am able to generate Excel file in development environment, but in Production it gives following error:
"Programmatic access to Visual Basic Project is not trusted Line: Microsoft Office Excel"
I did googling a bit and found that I have to open Excel file physically make few security related changes in macro as below.
1. Open the Office application in question. On the Tools menu, click Macro, and then click Security to open the Macro Security dialog box.
2. On the Trusted Sources tab, click to select the Trust access to Visual Basic Project check box to turn on access.
3. Click OK to apply the setting. You may need to restart the application for the code to run properly if you automate from a Component Object Model (COM) add-in or template.
Can i do above changes at runtime (using some code)?