Accessing Message Editor Of Web Based Email
Jan 10, 2008
I am trying to fill out my yahoo email's 'Compose email' Form using VBA. I have a workbook with a list of email addresses and text messages to be send. I am primarily using getElementsByTagName(), and able to open a new yahoo page, log in, create a new email, populate the addressfields,and subject field.
However, I am not able to write anything in the message editor ( the part where we write the actual message). The following is a part of the HTML code related to the message editor. Please suggest what I should do?
View 9 Replies
ADVERTISEMENT
Oct 18, 2013
I have an excel sheet that on the macro is saves and then sends a pdf via email. but outlook wants me to click to allow the application to send an email. Is there a way to bypass this?
View 6 Replies
View Related
Nov 25, 2009
I have built the following macro by but get the message 'For without Next' indicated on the End Sub line. I can't seem to figure out what the problem is using 'Help', any ideas on why this is tripping out?
View 9 Replies
View Related
Dec 5, 2008
I have a macro that sends a worksheet via email [Outlook] to a list of recipients.
Everytime an email is created, outlook pops up a confirmation window and waits for user input "yes".
Can I set up vba or outlook to skip that step?
I really want to create a macro with a loop to go through a list of files, execute a macro in each one, save the files and send emails to various people. This process will create about 40 emails and I don'd want the admin person to have to sit there and confirm each message going out.
View 9 Replies
View Related
Feb 1, 2013
Is it possible to have a cell when selected create an auto-generated email message to a recipient in column A with information taken from other columns inserted into the email. I understand it may be a bit vague at this moment, but I'm just wondering if this would be an alley to investigate further or not.
View 1 Replies
View Related
Jul 19, 2013
I am having trouble with copy-paste-from-outlook-to-excel routine. Is there a way where I can get a certain text (or numbers, perhaps) from an outlook email message and transfer it to an excel? It is fine to copy and paste one or a hundred emails, but it already exceeds 30 thousand email messages. I just wanted to know is there is a way for me to simplify my work through VBA.
Here is a sample of the email body:
"The lead with phone number 1231234567 is in the federal DNC list and has been rejected. We apologize for any inconvenience this may have caused. This email was automatically generated, please do not reply to it."
In this email body, i wanted to get only the number 1231234567 and paste it in the excel.
View 2 Replies
View Related
Nov 29, 2012
I did this 10 years ago so I admit I am rusty at this but here are what I had in my notes that worked with Excel XP. I am currently using Excel 2010
With ThisWorkbook
.HasRoutingSlip = True
With .RoutingSlip
[Code]....
The last line will send the workbook but I need a Subject and Message to go with it.
View 9 Replies
View Related
May 9, 2013
My task here is to generate email automatically. When i enter x to run the sub findvalue macro.
Any cells on the column D that has the value of 10 should generate email with the message body, subject and email address automatically.
Example if there are 3 task that are 10 days to deadline, 3 email will be generated after entering "x"
I have edited the Sendmail sub to locate the email's body, subject line and email from the excel.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Target = "x" Then
If Not Intersect(Target, Target.Worksheet.Range("G2")) Is Nothing Then
Call Findvalue
End If
End If
End Sub
Code:
Sub Findvalue()
Dim Rng1 As Range
Dim foundemail As Range
Dim a As Variant
Set Rng1 = Range("D2:D10")
For Each a In Rng1
If a.Value = 10 Then
Set foundemail = Sheets("Email").Range("A:A").Find(What:=Cells(Target.Row, 1), _
[Code] .......
View 4 Replies
View Related
Mar 16, 2014
I've set up an email to be sent via a macro (excel 2007 and outlook) and I expanded the body of the message and it now comes up with an error "Compile error: invalid outside procedure"
It was working when I only had 4 lines and now it's not working.
strbody = "Hi," & vbNewLine &_
"abc." & vbNewLine &_
"def." & vbNewLine & vbNewLine & _
"ghi" & InputBox("Enter Response date (dd/mm/yyyy)") & vbNewLine & vbNewLine & _
"jlk." & vbNewLine & vbNewLine & _
"lmn" & vbNewLine & vbNewLine & _
"ABC" & vbNewLine & vbNewLine & _
"XYZ" & vbNewLine & _
[code]....
View 3 Replies
View Related
Sep 5, 2006
This Sample is the code that I've adopted for my use.
My problem is this. My normal target .zip files are in the neighborhood of 75 - 80 Mb in size. Yes I know that they are huge..... (They are backup files for mainframe extracts ) Each zip file contains in the neighborhood of 2000 files. Currently, I have coded two ways of extracting data. Well really only 1.
1) I specify a location to extract all files. Which is time consuming ast it takes in the neighborhood of ( 5 min I thing for all files to get extracted ).
2) If I let the user specify a file filter parameter ( part of a file name ) while the WinZip shell is extracting files I'm searching all the file names in the dest directory and deleting the files that I don't want.
So what I want to know is it possible ( without buying software ) to be able to get the filenames of the files in a WinZip file.......
View 9 Replies
View Related
Mar 21, 2007
I have a ListBox in my worksheet "A", and I'm tryin to acces to it... I want to use that ListBox like a log to print the error i have found while running my code. The name of that ListBox is "IncongruenciesListBox".
now if that ListBox was in a userform, i can access to it easily, but if it is in the worksheet how can i change (add more rows) to it?
I tried:
Dim WS As WorkSheet
Set WS = ThisWorkBook.WorkSheets("A")
If added = False Then WS.IncongruenciesListBox.AddItem ("error")
And there is a message saying it cant find "IncongruenciesListBox".
View 6 Replies
View Related
Apr 6, 2007
Is the following valid code in Excel VBA?
If Application.WorksheetFunction.isblank( Cells(RowIndex, ColIndex)) Then
View 3 Replies
View Related
Apr 26, 2007
I would like to know if it's possible to access a worksheet in an Excel spreadsheet using a pre-prepared string or character-set? Usage is for years consecutive, so worksheets are '1990', '1991', '1992', etc.
In which case I'd like to be able access these with a prepared string '1990', instead of using the hard-coded method for hundreds of data accesses.
View 7 Replies
View Related
Jul 10, 2006
My Cell C3 is a numeric value..I have set conditional formatting to make the text red and bold when the number is equal or less than 10,000 is there a way I can make cell E3 display a message when the C3 condition is true?? or if not a message is there a way to make a message box pop up when my C3 condition of less then or equal to 10,000 is true?
View 6 Replies
View Related
Feb 12, 2007
I am having problems with the VBA Editor freezing at the most inconvenient of times when writing code and then clicking to the Sheet I'm working on, it just freezes up the whole of Excel and it has to be shut down and opened up again.
It seems like a memory problem at first, but there is sufficient memory
( 768Mgs, OS is XP Pro, Excel 2000, 9.02).
The work is not lost becuase I'm able to Save even at PC Re-boot, fortunately.
I've tested on 2 different PC's and the same happens. The only way to avoid the freeze it seems, is before I switch to view a worksheet, is to Save then click off VBA Editor and re-open.
When doing so, another symptom is it seems a huge amount of memory is freed up, ( pardon the terminology)
There is also a message that pops up when re-opening that same workbook that there are Formulas Linked to another workbook, but unable to find any after tediously searching every worksheet by using "Find, Look in Formula" there is nothing found, yet.
This freezing may happen twice a minute whilst pointing the mouse cursor from any VBA Edit window or worksheet and it's getting to a point of repetitiously having to Save, click off VBA Editor, and Click back on again each time I need to look at a respective Worksheet.
View 8 Replies
View Related
Jan 10, 2010
I am currently accessing data from one worksheet to another using: =INDEX(AD!C:C, MATCH($B9,AD!$B:$B, 0)). Ie from my current worksheet ‘Claim’, I’m going specifically to sheet ‘AD’. My full workbook contains 18 sheets, one for each of 18 engineers and of which, the name of the worksheet is the engineers initials. What I would like to do, is to use a lookup table located on ‘Claim’ which will hold a list of all 18 Initials, so that when an engineer selects himself from a drop down list, his initials automatically populate cell K7.
My question therefore is, is there a way of substituting the ‘AD’ in the formula: =INDEX(AD!C:C, MATCH($B9,AD!$B:$B, 0)) with the contents of K7? Or, if you can see what Im trying to do here, is there any other way of accessing specific sheets by inserting the sheet name into a formula?
View 4 Replies
View Related
Apr 2, 2009
How does one access the properties of a shape? For instance getting the text on a button ( from the forms toolbar ) on a worksheet. This works
View 4 Replies
View Related
Nov 10, 2009
I've been teaching myself VBA for the purpose of processing some time resolved data from an instrument. I've come up against a problem and I just can't work out why the code is failing. (using excel 2007, VBA 6.5)
I declare some arrays as dynamic, then ReDim them to a user defined number (with Option Base 1) and input data from a spreadsheet into the array. I can then output the data into the spreadsheet again and the lbound and ubound functions return the correct values for the array. What I cannot do is actually access individual elements. If I specify array(i) I get the "Subscript is out of range" error. The code relevant to this problem is as below (simplified as there are more arrays):
View 5 Replies
View Related
Dec 14, 2006
I have designed a spreadsheet that updates automatically and shows the company's perfomance on several sheets.
To add to the use of the sheet I would like to offer the user a preference set up. So they choose the sheet it opens on for example.
I am happy with how to do all the above except for the fact that the sheet is required to be available to all staff! so only one employee can have it open in read/write everyone else will eb read only!
I was thinking the only way around this would be to have a second sheet that saves their environ user name and preferences.
That would require using the sheet closed though would it not?
View 9 Replies
View Related
Apr 21, 2008
i have a simple PO tracking system, i have a workbook with multiple sheets at any one time approximately 20, projects come and go and i need to add a sheet periodically, rename the tab to the project ID - 4x numeric.
All this i have managed to do, and sort the sheets numerically, i now need to copy the last (added) row on the Project specific sheet to the last clear row on the summary sheet.
I have also achieved this, but in order to do it properly i need to switch between the specific Project sheet i am adding the current PO to, (any one of 20) and the summary data sheet, the sheet i am copying to.
To achieve this i thought i could assign the TabName (of the Project) to a variable and then refer to it
Sheets(TabName).Select. using msgbox throughout appears to provide the correct results, however, this produces a {subscript out of range error no9} on this particular line. Any suggestions welcome. Same issue i believe i could address my problem if i could whilst in the Project specific sheet i could determine the codename of the sheet which i believe i could then use to switch between sheets programatically.
View 9 Replies
View Related
May 25, 2007
i am trying to access buttons like ' Format - Column - Hide'
View 5 Replies
View Related
Jan 17, 2008
How can i access data from other workbook i have opened.?
I am new in VBA.So little code snippet would be good to show.
I want to get the cell data from workbook2 to workbook1
View 9 Replies
View Related
Aug 23, 2013
I want a message box to pop up when a "certain" value(example "guest") is enter in a range(ex- a1:a20).
How can i accomplish this with a vba code?
View 9 Replies
View Related
Mar 18, 2012
I am working on a spread sheet for work were we have to test certain items on certain days, e.g. one item needs to be tested every Tuesday & Thursday, when the test is completed you click on a drop down box and click on completed or in progress.
What I would like are a couple of things to happen as follows:
A message box would pop up when you open the file to inform the employee that the test is due today only on Tuesday & Thursday if not completed or in progress from the drop down box. Once you select completed or in progress from the drop down box the message box no longer appears. Every Tuesday & Thursday when it's first open it deletes the cell content, thus triggering the message box test is due today, and once completed or in progress it no longer appears until next Tuesday or Thursday.
The spread sheet is on shared drive and used by several users, let's just say cell A1 is the cell I have the drop down box
View 1 Replies
View Related
Jun 24, 2014
I have a workbook that can open a URL into IE when a project number is entered in an input box.
What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.
The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch
Code:
Sub SearchPidsMessageBox()
Dim Answer As String
Dim MyNote As String
[Code]....
View 2 Replies
View Related
Feb 22, 2009
I have been reading the different post here on the forum.
I have found a snippet of code that will open a pop-up message from a value of a cell. I would llike to do this on one of my reports. Here is the scenario.
Range (R5:S5) 0.15 them MsgBox "Note Must Be Entered For +/- 15% change"
But There are 14 different cells that I want this to work for. The value differs from day to day, and this should pop-up happen without a user having any actions other then the calculated value. But ones the note is entered in the "Notes: cell the message will not return.
Hope I explained it correctly.
The value of the cells in question are calculated in each cell with a formula example "=IF(ISERROR(Z20/H5),0,IF(ISERROR(Z20/H23),0,(Z20/H23)))"
View 9 Replies
View Related
Jun 18, 2014
When I open my excel file and go to the VBA editor there is a pop up telling me that there is a dll error. So, I can't access none of my code or run any of them.
In the tools menu and references it says : "MISSING : Microsoft PowerPoint 14.0 Object Library". When I unchech this box and close the menu, it checks itself back.
Edit : I have Microsoft PowerPoint 12.0 Object Library also in my references list.
View 2 Replies
View Related
Jan 26, 2008
Any way that the VBA Editor Immediate window from within VBA code?
View 9 Replies
View Related
Feb 21, 2013
Sometimes I inadvertently remove/hide the menu bar and Icon bar from the VBA Editor. Not sure what I've done and not sure how I get it back.
View 4 Replies
View Related
Dec 20, 2008
What would be a code to open notepad and paste infomation from column cells A3 to A30 when ever a command button is clicked.
View 9 Replies
View Related
