When I open my excel file and go to the VBA editor there is a pop up telling me that there is a dll error. So, I can't access none of my code or run any of them.
In the tools menu and references it says : "MISSING : Microsoft PowerPoint 14.0 Object Library". When I unchech this box and close the menu, it checks itself back.
Edit : I have Microsoft PowerPoint 12.0 Object Library also in my references list.
Sub OpenCalendarForm()
frmCalendar.Show vbModeless
End Sub
When I run this I get this halt "System error&H80070057 (-2147024809). The parameter is incorrect. I havn't been doing VBA in a while as I am retired now but I have used this particular statement many times in the past and never had this error before. I have made sure there no typos. I open another workbook which has forms opening and copy pasted the the routine into my other workbook but I get the same error.
I am working on a worksheet with quite a few advisors who will be using the sheet, because of this reason I am trying to cover my back with as much error handling with my VBA script as possible. Where I am struggling is the following line:
Code:
Set cb = Workbooks.Open("wilm-dchome"UserName"DesktopCurrent projectPipeline Grouped.xlsm")
I want to have an error handler that says if this file cannot be found use the following line of code instead:
Code:
Set cb = Workbooks.Open(Application.GetOpenFilename())
It may even be just a simple if statement instead but I cant seem to find the answer.
I do not understand why my code returns a Run Time Error"9" Subscript out of range. With the following code, I opened a workbook and then wish to close that same workbook without saving. Eventually I will be pulling information from the workbook but for now I just want it to open and then close right away.
Private Sub cb_NewDate_Change()
ListIndex = cb_NewDate.ListIndex
If ListIndex = 0 Then
Application. ScreenUpdating = False
Workbooks.Open Filename:="I:JoeNetwork Conversion FactorsNetworkConversionFactors_Ver_2_0_0.xls"
Application.Workbooks("I:JoeNetwork Conversion FactorsNetworkConversionFactors_Ver_2_0_0.xls").Close False
End Sub
I am getting a runtime error 32809, Application-defined or Object-defined error when I try to open my workbook. I remember someone posting code to set the VBA References when the Workbook is opened and I think this is what I need, because the file will run on Excel 2000 and not on Excel 2003. I know the References are different, but I don't know how to change them.
View 9 Replies View RelatedHaving a problem with a simple udf to calculate values across multiple sheets using the calling cell as a reference point. It works great until you open another workbook and then switch back. At that point all cells calling this udf return a #value! error. If I type anywhere on the sheet all of the values will recalculate but this is less than ideal for the end users here. below is example of concept
Function TestMe()
Application.Volatile (True)
Dim strCallAddress As String
Dim intSubTotal As Integer
strCallAddress = Application.Caller.Address
intSubTotal = Worksheets(2).Range(strCallAddress).Value
intSubTotal = intSubTotal + Worksheets(3).Range(strCallAddress).Value
TestMe = intSubtotal
End Function
I'm using excel 2010 and pdf creator to make a pdf (and open it automatically). It works with the following code:
[Code] .....
path and filename are previously defined objects.
I'm using pdfcreator because the code also has to be used with excel2003 on another pc. The problem is that I get an error (probably for trying to open the newly creating pdf-file).
Error 2417024894 (80070002) during execution. Method run of Object IWshSell 3 failed.
Apparently my program quits after i try to open an excel file. If you open the file manually you get an error upon opening the file...something like this:
"File you are tyring to open is in a different format than specified by the file extension".
The problem is i am using an excel macro using VBA and once the file is opened the VBA execution quits.
The excel file turns out to be an xml file which excel can open the file and have the VBA continue running if i RENAME the file with an "xlsx" extension. The problem is that i cant ask the user to rename the file.........how do i get VBA to open the file without an issue?
I have a list of workbooks on a sheet that i am trying to open with vba one by one. If a workbook in my list does not exist or was deleted then excel displays a runtime error. Is there a way to bypass this error and have the code skip the non existant workbook and open the next one?
View 8 Replies View RelatedI am basically using a combobox in word that opens an excel spreadsheet and pulls information about the people entered in the combobox. The information pulled from excel is then pasted into the original word document.
The problem that I am having is that the macro may be needed to run twice (ex. suppose the user forgot to include an individual in the first run) and on the second run the excel document cannot be opened and it gets stuck on the loop. The macro will only work again if the word document is closed and reopend. I suspect that the excel document is not completly closing on the first runthrough.
I've included my code below. The initialize combobox code is on the bottom. I
PHP Code:
Dim WordApp As Word.ApplicationDim xlApp As Excel.Application
'Dim xlWB As Excel.WorkbookPrivate Sub CommandButton1_Click()Bios
= ActiveWorkbook.NameNewWBookName
= ActiveWindow.CaptionSet WrdDoc
= ActiveDocumentlastrow = Range("A1").End(xlDown).RowS
[Code]....
whats happening to my workbook. On a worksheet called Data, i'm pulling in a lot og data from a database. Then on another worksheet i'm looking for certain things on the data sheet and counting how many there are.
This all goes along find until i close the workbook, and then re-open.I click the automatically update button that appearsand once it finishs updating all my values are replaced with #Value.
This is the formula i'm using.
= SUMPRODUCT(--(Data!$X$1:$X$49871="4")+(Data!$X$1:$X$49871=4),--(Data!$M$1:$M$49873="FTS-Unix"))
I have a user form with a TextBox (TextBox1), the user enters a filename and presses CommandButton1, this then opens the file. I have set an error trap so that if the file does not exist a MsgBox prompts the user to re-enter. So far so good, however if the error trap operates any further files entered are declared as non-existent even if I know they exist. I thought this would be quite easy but once again VBA bites me back!!
here is my code
Sub CommandButton1_Click()
stPath = ThisWorkbook.Path
stFilename = "Retention" & "" & TextBox1 & ".xls"
stFullname = stPath & "" & stFilename 'completes full path of for TextBox1
On Error Goto Errorhandler: 'go to this if file does not exist
Workbooks.Open stFullname
ActiveWorkbook.RunAutoMacros xlAutoOpen
The following script runs fine the first time I click the command button on an Access form but after I close the Excel workbook and click the command button again to edit a new spreadsheet, I get the follow error message:
Run-time error '1004': Method "Columns' of object'_Global failed.
It fails here:
Code:
Columns("H:H").Select
The script is being run from Access 2007 and is opening a spreadsheet in Excel 2007 (but using xls extension)
Code:
Private Sub IdahotoExcel_Click()
Dim dlg As FileDialog
Dim idahofile As String
[Code].....
The macro (used to) go down the list of spreadsheets and copy certain data from them into this master workbook. Now I'm getting a "'C:Users310108841DesktopTestFolder' could not be found" error and don't know why.
[Code].....
The error appears to happen here:
[Code] ....
What's more infuriating is that this appears to happen at random. I have been trying all afternoon to get it to work, and had no luck. I have literally just run it now, and it works fine. I can't believe it just works at random.
I cannot figure out how to get my error handler to work, or actually, not work. It seems to work fine when there is an error, but the code still gets read even when there was not an error. Basically, I am trying to open a file, which may or may not be there. When it is not there I want a message to pop up informing the user. However, when the file is there and it opens, the error handler still gives the message box. Any ideas what I am doing wrong?
Private Sub btnOK_Click()
Application. ScreenUpdating = False
Dim LCSfile As String
LCSfile = frmSelectFile.Listbox1.Value
On Error Goto ErrHandler
Workbooks.Open Filename:=sPath & sDate & "" & LCSfile & "QUANT.CSV"
ErrHandler:
MsgBox ("File is not quantitated. Please select another file.")
Application.ScreenUpdating = True
End Sub
Suddenly when I open a ExcelWorkbook Microsoft Visual Basic shows a messagebox stating: "Runtime faillure 9 Subscript out of reach" only the closebtn is enabled. After closing the box the workbook opens normally.
View 2 Replies View RelatedI can't open a file anymore. On opening an exclamation mark message appears telling me the file contains "Too many different cell formats". After clicking "Ok" Excel doesn't continue the opening proces. However I need the info in the file. how to retreive the info in the file?
View 2 Replies View RelatedI am having problems with the VBA Editor freezing at the most inconvenient of times when writing code and then clicking to the Sheet I'm working on, it just freezes up the whole of Excel and it has to be shut down and opened up again.
It seems like a memory problem at first, but there is sufficient memory
( 768Mgs, OS is XP Pro, Excel 2000, 9.02).
The work is not lost becuase I'm able to Save even at PC Re-boot, fortunately.
I've tested on 2 different PC's and the same happens. The only way to avoid the freeze it seems, is before I switch to view a worksheet, is to Save then click off VBA Editor and re-open.
When doing so, another symptom is it seems a huge amount of memory is freed up, ( pardon the terminology)
There is also a message that pops up when re-opening that same workbook that there are Formulas Linked to another workbook, but unable to find any after tediously searching every worksheet by using "Find, Look in Formula" there is nothing found, yet.
This freezing may happen twice a minute whilst pointing the mouse cursor from any VBA Edit window or worksheet and it's getting to a point of repetitiously having to Save, click off VBA Editor, and Click back on again each time I need to look at a respective Worksheet.
Any way that the VBA Editor Immediate window from within VBA code?
View 9 Replies View RelatedSometimes I inadvertently remove/hide the menu bar and Icon bar from the VBA Editor. Not sure what I've done and not sure how I get it back.
View 4 Replies View RelatedWhat would be a code to open notepad and paste infomation from column cells A3 to A30 when ever a command button is clicked.
is it possible to remove a VBE project from the VBE editor? This is a project that is opened as a read-only workbook, and then converted into an addin (essentially just to hide the worksheets). It therefore shows in the VBE editor but is in neither the add-ins or workbooks collections. This file is basically used as a source for data for another charts workbook. I need to clear this out of the VBE editor so as to reload an updated version of this workbook every so often.
View 6 Replies View Relatedis there a quick and easy way to rename the Sheets In VBA Editor (they are currently all mixed up), i.e. I have Sheet221 followed by Sheet11 etc. Is there a way to reorganise them so that I get Sheet01 followed by Sheet02 etc.
View 5 Replies View RelatedI have a query in Excel 2003.
My question is:
I have a macro created for my Excel. I have a short cut key to run this macro. When i run the macro, the VB editor is opened where i have written the code. My requirement is, I don't want the VB editor to be opened when i run the macro. I want the macro to be executed but the VB editor should not be visible to the user.
I can't seem to tell if my formula isn't correct in concept, or if this is a known problem with Excel 2000?
I have written a short formula that is pretty straightforward, but is giving a different result in Excel's "Formula Editor" box (when you hit the = button) than is showing in the cell itself. The Formula Editor's result is showing as "TRUE" which is what I believe is the correct value, but the cell itself is showing the "FALSE" result of a different incorrect value.
i have a sheet with lots of macros.
for some reason whenever i run this one specific macro the vba editor screen comes up.. there is no errors. dont understand why it keep coming up.
also when i run this specific macro the first time it works really quickly.. and the next time i run it, the code takes a lot longer execute any ideas why?
Is it possible to check, with VBA code running some sort of "If" function in the background in an open workbook within which the VBA code is placed, whether a user is opening (or attempting to open) the VBA Editor? This should see any attempt being made, whether the user uses Tools>Macro>Visual Basic Editor, Alt + F11 or right clicking on the Excel icon top left to "View Code".
View 2 Replies View RelatedI have made TAB using Custom ID Editor but it is available in particular file how to make appear that TAB in all excel ?
View 3 Replies View RelatedI am working on a report where if an icon or button is clicked it should open rich text editor or text box with current date and time in the box so that the managers can enter their remarks next to them. On clicking submit it should save the remarks and next time when opened it must have previous comments with date and also should prompt todays date for new comments.
View 2 Replies View RelatedI am trying to fill out my yahoo email's 'Compose email' Form using VBA. I have a workbook with a list of email addresses and text messages to be send. I am primarily using getElementsByTagName(), and able to open a new yahoo page, log in, create a new email, populate the addressfields,and subject field.
However, I am not able to write anything in the message editor ( the part where we write the actual message). The following is a part of the HTML code related to the message editor. Please suggest what I should do?