Is it possible to check, with VBA code running some sort of "If" function in the background in an open workbook within which the VBA code is placed, whether a user is opening (or attempting to open) the VBA Editor? This should see any attempt being made, whether the user uses Tools>Macro>Visual Basic Editor, Alt + F11 or right clicking on the Excel icon top left to "View Code".
I have a row on a tab that I always want to hide before I print or save. Is it possible to get a message to pop up if I try and print the page while row 33 is not hidden?
When you create a userform in the vba editor, then go to another module, then return to the userform, you see the userform object by default and in order to show the code you have to right-click on the userform and select "view code".
How can I make the "view code" view the default view for the form in the VBA editor? (i.e. so that when the form is selected, I am presented with the code, not the object).
I have 3 Work books - one (WB1) checks its version number against an online record and if they dont match it opens WB2 which then proceeds to download the updated version copy information from WB1 to its self which it then pastes into WB3
WB1 then gets deleted and WB3 Renamed to the old name of WB1
the issue i have is when i open WB2 using the button that also checks for updates on WB1.
WB2's code seems to just stop when it gets to the point of updating WB3 no error messages or nothing it just stops!
Two workbook, A & B. Code in B copies some data over to a sheet in workbook A.
It does this not problems if A has remained open, but if it has just been opened, I get a "subscript out of range" error at the "With Workbooks" line.
The bit in red is what I have recently added to allow workbook A to be closed unless needed. Since adding this, the debug error has emerged, even though there was no problem when workbook A remained permanently open.
I want the code to run when we open excel workbook "TEST" and it should open up all the workbooks one by one in the folder J:ABC and copy cells C2 and C4 values in the A and B columns of TEST workbook.
e.g There are 5 workbooks in the folder J:ABC so when the TEST workbook is opened then the code should run and open 1st workbook and copy values in cells C2 and C4 to it and close the workbook.
The code should run as below:
1st workbook:
C2 value will go in Test workbook B1 C4 value will go in Test workbook A1
Close 1st workbook
2nd workbook:
C2 value will go in Test workbook B2 C4 value will go in Test workbook A2
close 2nd workbook.
3rd workbook:
C2 value will go in Test workbook B3 C4 value will go in Test workbook A3
close 3rd workbook.
and so on It will be going to next rows in A and B columns.
I nedd to first log in and then specify the wanted time period ( i. e. week) before I extract the information. Is it possible to get the source code (as string) from the last focused IE-window.
The user is supposed to use output from xl to manually fill in new values on recently mentioned webpage.
a code, that looks at range "A" (xls down) and then goes over that amount of columns in "I" and warns if there are any blank cells and ends the macro if so.
Right now I have a script that will highlight any rows where columns "Unit1" and "Unit2" share the same value.
The script is below:
[Code] .....
How to modify this so that it only highlights rows where the same data is duplicated twice?
For example if both columns had "The dog runs" as their value in the same row, then this would only get highlighted if two or more rows on the sheet also had "The dog runs" for both their value.
I am having difficulty getting a script to work that manages duplicates being added to a worksheet from a userform. Each record is assigned a unique ID when it is added to the worksheet initially. The problem that I am having is that the user wants to add non-unique information to the worksheet in unique records periodically. I can do that, but I am looking to make the application more user-friendly by reducing the number of msgboxes he has to respond to in order to do this. I have some code below which works, but it needs to be smarter.
Private Sub UpdateContact() Dim strAnswer As String 'Copy values from Customer Form controls to Data array tbxWrkTel.Text = Format(tbxWrkTel, "000 000 0000") tbxMobile.Text = Format(tbxMobile, "000 000 0000") tbxHomeTel.Text = Format(tbxHomeTel, "000 000 0000") If Not WorksheetFunction.CountIf(Sheet1.Columns(1), tbxCompany) > 0 Or _ Not WorksheetFunction.CountIf(Sheet1.Columns(2), tbxContact) > 0 Then 'To avoid duplicate data If tbxCompany = "" Then tbxCompany = "-".........................
I want to combine the following two procedures, but I can’t figure out how . The purpose of the procedures is to warn the user to save data before importing and overwriting data that was already there.
Sub Is_sheet_empty() If Range("your range") = vbNullString Then Call Add_New_Data Else: Call Sheet_Not_Empty End If End Sub
Sub Sheet_Not_Empty () Dim Response As VbMsgBoxResult Response = MsgBox("Do you want to replace this data?", vbYesNo + vbQuestion) If Response = vbYes Then Call Add_New_Data Else: Response = vbNo ‘Do Nothing End If End Sub
I am having problems with the VBA Editor freezing at the most inconvenient of times when writing code and then clicking to the Sheet I'm working on, it just freezes up the whole of Excel and it has to be shut down and opened up again.
It seems like a memory problem at first, but there is sufficient memory ( 768Mgs, OS is XP Pro, Excel 2000, 9.02).
The work is not lost becuase I'm able to Save even at PC Re-boot, fortunately.
I've tested on 2 different PC's and the same happens. The only way to avoid the freeze it seems, is before I switch to view a worksheet, is to Save then click off VBA Editor and re-open. When doing so, another symptom is it seems a huge amount of memory is freed up, ( pardon the terminology)
There is also a message that pops up when re-opening that same workbook that there are Formulas Linked to another workbook, but unable to find any after tediously searching every worksheet by using "Find, Look in Formula" there is nothing found, yet.
This freezing may happen twice a minute whilst pointing the mouse cursor from any VBA Edit window or worksheet and it's getting to a point of repetitiously having to Save, click off VBA Editor, and Click back on again each time I need to look at a respective Worksheet.
When I open my excel file and go to the VBA editor there is a pop up telling me that there is a dll error. So, I can't access none of my code or run any of them.
In the tools menu and references it says : "MISSING : Microsoft PowerPoint 14.0 Object Library". When I unchech this box and close the menu, it checks itself back.
Edit : I have Microsoft PowerPoint 12.0 Object Library also in my references list.
is it possible to remove a VBE project from the VBE editor? This is a project that is opened as a read-only workbook, and then converted into an addin (essentially just to hide the worksheets). It therefore shows in the VBE editor but is in neither the add-ins or workbooks collections. This file is basically used as a source for data for another charts workbook. I need to clear this out of the VBE editor so as to reload an updated version of this workbook every so often.
is there a quick and easy way to rename the Sheets In VBA Editor (they are currently all mixed up), i.e. I have Sheet221 followed by Sheet11 etc. Is there a way to reorganise them so that I get Sheet01 followed by Sheet02 etc.
My question is: I have a macro created for my Excel. I have a short cut key to run this macro. When i run the macro, the VB editor is opened where i have written the code. My requirement is, I don't want the VB editor to be opened when i run the macro. I want the macro to be executed but the VB editor should not be visible to the user.
I can't seem to tell if my formula isn't correct in concept, or if this is a known problem with Excel 2000?
I have written a short formula that is pretty straightforward, but is giving a different result in Excel's "Formula Editor" box (when you hit the = button) than is showing in the cell itself. The Formula Editor's result is showing as "TRUE" which is what I believe is the correct value, but the cell itself is showing the "FALSE" result of a different incorrect value.
for some reason whenever i run this one specific macro the vba editor screen comes up.. there is no errors. dont understand why it keep coming up.
also when i run this specific macro the first time it works really quickly.. and the next time i run it, the code takes a lot longer execute any ideas why?
I am working on a report where if an icon or button is clicked it should open rich text editor or text box with current date and time in the box so that the managers can enter their remarks next to them. On clicking submit it should save the remarks and next time when opened it must have previous comments with date and also should prompt todays date for new comments.
I am trying to fill out my yahoo email's 'Compose email' Form using VBA. I have a workbook with a list of email addresses and text messages to be send. I am primarily using getElementsByTagName(), and able to open a new yahoo page, log in, create a new email, populate the addressfields,and subject field.
However, I am not able to write anything in the message editor ( the part where we write the actual message). The following is a part of the HTML code related to the message editor. Please suggest what I should do?
'The following code creates a new commandbar name Visual Basic Editor, which on event delete the VBE module1. How can I tie the built in visual basic editor commandbar to this.
Sub bar() Set mybar = CommandBars("Tools").Controls("Macro") Set mycontrol = mybar.Controls _ .Add(Type:=msoControlButton) With mycontrol .Caption = "Visual Basic Editor" .FaceId = 1 .OnAction = "MySub" End With mycontrol.Visible = True End Sub
Function mysub() With ThisWorkbook.VBProject.VBComponents("ThisWorkbook").CodeModule .DeleteLines 1, .CountOfLines End With End Function