I am trying to find a macro that will clear duplicate entries in a column of data, and then move to the next column and repeat the process until it gets to a blank column.
There are blank cells between entries in a column. I need to keep the data unsorted as the cells are linked to others in the row, therefore I dont want to delete the cells, just clear the contents.
I have a button on my userform that I would like to clear all entries in column B in a sheet called "6 Entries" when pressed
Is there a code for this ?
how to reference the drang (named range) and the cell propertly as i keep getting an error.
Everything in the below code works except the parts below in blue
details:
I have in column X lots of names and in column Y (dynamic column
anges as the users chooses them as per the code) and I want to loop through all names in 'X' and if there are multiple of the same names then for the corresponding 'Y' row entry of each be checked and if they are equal (same $ value) then for one of them of cells in the Y column to be cleared.
Basically if the same name appears more than once it will most likley have the same $ value and if i do a calculation on the $'s it will be 2,3,10 times the amount it should be, hence the need for this .
As per the below code I am trying to use 2 for Each loops though I keep getting an error when trying to reference the drng range which has the values in them..
Checked for a while now for a match in my query but can't find one that matches. I have a column of data to which has multiple values in each cell separated by a comma I.e 1,1,12,37
I copy this column into a new sheet a:a then I'll run text to columns to separate the values into there own cells so the following columns now show this
a1 =1 b1=1 c1=12 etc
I'm now stuck as I need to clear the contents on the cells within range a1 to k1 that have duplicate values.
end result is a1=1 b1 is now blank c1 =12 etc
I have a spreadsheet that I have created as a door schedule for faculty members at our institution of higher education. The intention is for them to fill-in their office hours and courses along with a few other bits of information. One sheet should have their teaching and office hours and one sheet should not.
These are the cells that should be cleared once the sheet has been duplicated (F30, F31, G30, G31). Once the sheet is duplicated and those two cells' contents has been deleted, both sheets should be printed. Ideally, all of this would be initiated by clicking a hyperlink or something like that.
I have a workbook with 12 sheets, 1 for each month of the year. Each month has around 30,000 user IDs on it (this is a log of each time a user logs into our website). What I need to do is find out how many unique users have logged into our site for the whole year, or in other words, remove duplicate user ids accross the workbook. I realise that this will probably destroy my processor, so was wondering the best way to do it? I also have all this information in ONE spreadsheet if it would be easier? I just copied and pasted each month into a column (Jan is column A, feb in B, mar in C etc) I ran some code on this sheet to remove dupllicates from column A:E but this was taking AGES!
View 5 Replies View RelatedI have been trying a number of different functions!
I have the following countif function that is searching a worksheet (Cases Closed) for the name John in Column O and excluding Solutions in column x. The problem I have is there are duplicates cases in Column C that are being counted two and three times.
Is there anyway to have the following function exclude duplicates records in Column C? Just count unique records in Column C?
=(COUNTIF('Cases Closed'!O:O,"John"))-(COUNTIFS('Cases Closed'!O:O, "John", 'Cases Closed'!X:X, "*Solution*"))
excel.jpg
Basically I've made this up myself because what ill be working with has 100s if not 1000s of rows with many different product numbers that's quantities are different. What I've been able to do up to now is sort the spreadsheet by the product number so all the same rows are next to each other. My problem is however I need a speedy way of making these duplicate rows become one but add the total quantity basically everything in the left screenshot into the one on the right. What I've tried up to now is sorting them so there together and manually adding them up and putting them into one of the rows quantity, then delete the rest. takes to long. Another was to make a row underneath the rows I need into one but that takes more time than manually adding and deleting the rest.
I'm working on a employee evaluation form. I'm using a Pass/Fail system.
I have a cell designated for PASS & one for FAIL. In these cells, I would put
"YES" if they passed, "YES" if they failed that section.
How can I prevent someone from mistakingly entering Yes in both cells?
I would like to check column B and if any of these values match values in column J hightlight the cell on the same row as the match on column E green. I don't know much about excel but this would be a tremendous help because i'm looking through quite a bit of data. I've tried using conditional formatting and i can't seem to get that to work for my needs. Let me know if you need anymore information.
View 13 Replies View RelatedI have a table of data like this:
A , 1 , 1
B , 2 , 1
C , 3 , 4
D , 1 , 3
E , 3 , 3
I need to eliminate duplicate entries WITHIN a row. So, I need the table to become:
A , 1
B , 2 , 1
C , 3 , 4
D , 1 , 3
E , 3
Is there an easy way to do this for a large sample? Also, there are actually more like 8 columns of this data, if thats important.
I've generated a sheet where, based on the total run hours of a generator set using a given fuel type, we can determine which engine to run on what fuel when. The problem I've run into is that if more than one engine has the same runtime, the chart returns just the lowest numbered engine and eliminates the remaining engine(s). What I'm trying to do is make it so that when this occurs, the suggested engines show up in numerical order. For example instead of 1, 1, and 1 showing up on the chart, something like 1, 2, and 5 will show when they all have 0 run hours. I've attached my chart below with some engines having the same runtimes. RunOrder.xlsx
View 5 Replies View RelatedNew here, I wanna do a "Prevent Duplicate Entries" into my column i try the following: http://www.mrexcel.com/articles/prev...duplicates.php
http://www.theexceladdict.com/_t/t040818.htm
They all work well but if I'm using copy and paste It doesn't work! why is tat so?
Second issue will be i'm wanna do prevent duplication for the whole column not just one cell.
I have a spreadsheet that has account numbers listed multiple times. I need to eliminate all of the duplicate entries...Is there a formula for this...?
View 9 Replies View Related=COUNTIF($A$1:$D$100,A1)=1
however I don't know how to change that to suit my needs (or even if it is at all possible to change it to suit my needs)
I will try my best to explain how my spreadsheet is set up as unfortunately I am at work and I can not use the method to show you the spreadsheet.
My spreadsheet:
I already have Data Validation in use from a list that I created. I use the same validation list in Columns C, E, G, I, K-BA
I also use validation list in other cells, and it is OK if these are duplicated throughout the row.
The only cells that should not contain duplicate information are the ones from C, E, G, I, K-BA
Basically I want to stop someone accidentally chosing the same option from the list within the same ROW.
Just in case it makes any difference I should let you know that I have already had help from the forum regarding macros for this same spreadsheet, here is the macro that is currently running just in case it makes a difference if there is an answer to my current problem.
Option Compare Text 'A=a, B=b, ... Z=z
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Cell As Range
Dim Rng1 As Range
On Error Resume Next
Set Rng1 = ActiveSheet.Cells.SpecialCells(xlCellTypeFormulas, 1)
On Error GoTo 0
If Rng1 Is Nothing Then
Set Rng1 = Range(Target.Address).........................
I want to use (VBA) data vaildation to restrict duplicate entries.
Worksheet Name = "Metal Type"
NoDupe Cell = B15 (allowing text and numbers)
Range to check = (Sheet)="Metal Type" (Range)=A21:A100
Error = Message box "Enter Unique Name in Cell B15"
Then Exit Sub
there are unique entries like AU0896 etc. that are repeated in my list.
my job is to find how many unique entries there are and add the count at the end so, basically if there are 6 AU0896 entries, then I must create a AU08966 value.
In my spreadsheet, on ( sheet A) I pick up a value to a range (O2:O22) from other worksheet (sheet B), the value is validated when a cell in the same range but other column (A2:A10) reach a specific criteria.
But in the same column if the criteria is typed again I gone a have the same value on range( O ), and I dont want that, because this value represents a total for a day, and is to be added to other cell.
I'm using this, to pick up the data
Ex:
(A2:A10) Criteria
(O2:O10) value picked up
on SheetA, Sumif(sheetBA10:A40,A2,SheetBK10:K40)
How can I count only one of the values picked up from sheet B?
Got a workbook with 4 worksheets and sometimes we need to cut and paste a row from one worksheet to another, now thats easy now as we are all human and sometimes it gets copied and we have duplicate logs.
Now each sheet has usually not got that many rows in it, but that spreadsheet is getting sent to the highest people in the company and any mistakes look poor.
What i'm looking for is a way that i can highligh any rows that a duplicated in each worksheet. I can do it in each worksheet using conditional formatting with something like = COUNTIF($A8:$A$20,A8)>1. but don't know how to check that is not on any other worksheet. On every worksheet only need to check Col A for the duplicate information
Wihitn a large SS I have a column which has a number of entries that may include an amount of duplicate entries. Till now I have been using Sort and them manually deleting the duplicates is anyway that I can select just the Column and then without sorting go down and if a duplicate is found, then the duplicate would be deleted. Meant to say the dta is numeric.
View 2 Replies View RelatedI have a spreadsheet which has data in column A & B. I trying to do an if statement to state "YES" if data in both A and B has been duplicated. EG 111 in (A) & 222 in (B) are a PAIR, im need an if statemnet in Column (C) to say if this PAIR are duplicated in these two columns return "YES". I have tried THREE different methods to do acheive this which are in the attached document. The main issue I am having is the iff statement is returning yes for some of the number when thye are completely different. I have used concatenate, & and tried to multiply the two values to try to make it unique. I have an example of each in the separate tabs.
View 7 Replies View RelatedI am trying to determine wether there are duplicate entries within a range and have then counted also. Example:
I have a list if zip codes and I want to find out how many of each zip code are there. If I have a list with:
12345
12345
12345
12346
12346
12347
I want to have it tell me there are 3 of "12345" and 2 of "12346", possibly next to the entry?
12345 3
12345
12345
12346 2
12346
12347
I'm trying to get data totals for multiple entries and haven't been able to figure out how to do this using a pivot table.
For example:
A B
Ben 2
Bill 1
Jane 3
Bill 4
Dave 7
Jane 4
Would make it
Ben 2
Bill 5
Jane 7
etc.
this list is 3700 cells long.
Is there an easy macro or another way of doing this? I want to generate a list that gives all data totals but just lists each persons name once. I treid attaching the file but it wont let me! here is the link... [URL]
highlighting the duplicate entries in the same date comparing C:C data.
View 3 Replies View RelatedLet's say I have two mailing lists, A and B.
A:
bob@bob.com
jeff@jeff.com
tom@tom.com
cindy@cindy.com
jose@jose.com
B:
fred@fred.com
jeff@jeff.com
angus@angus.com
cindy@cindy.com
chuck@chuck.com
Now I want to create list C, a modified version of list B, which is made up of everybody in list B, EXCEPT for those people who are also present in list A (in this case, Jeff and Cindy).
So basically list C should look like this:
C:
fred@fred.com
angus@angus.com
chuck@chuck.com
What would be the fastest and most efficient way to create list C?
how i can set 'Data Validation' to stop me from entering duplicate values across multiple columns, i can set it for a single column i.e. A1 to A100 but i am after this but for something like A1 to H100.....?
I am currently using this formula in Data Validation:
=COUNTIF($A$1:$A$100,A1)=1
I need something to do this but for multiple columns.
I have a userform created to enter clients information which by submitting goes to sheet1 ..
Now the challenge is i want to make sure that no duplicate entries are entered thru userform.
And if duplicate company name is entered then all the client details of the other fields of the userform shall display the values of previous entry so that i can edit the latest changes to the sheet.
I currently have a sheet of 20,000+ items and 2 columns. My first column is an part number and the second is a date. Each part number can be show multiple times but will have a different date each time. What I want to do is that the first occurrence of each part number (and corresponding date) and put it in sheet 1, the second occurrence of each part number and date into cell 2, third in cell 3 and so on... not all part numbers are showing multiple times, only certain ones.
View 1 Replies View RelatedI am trying to create a drop down list from a named range that has duplicate names listed. I cannot delete any of the duplicate rows. Is there an easy way to create the list with each name represented only once?
View 14 Replies View RelatedI have 2 columns of data, apprx. ~25,000 rows.
Col 1 is user IDs and Col 2 is there status (pending, conditional, approved, rejected)
Col1 IDs are not unique because they can have multiple statuses associated with them in Col2. An ID can go from pending to conditional to either approved/rejected and all these are included in the raw data file. I want to remove all duplicate ID rows and keep the ID row with the last known status.
For example: