Find Duplicate And Clear Possible Corresponding Matching Value
Feb 14, 2010
how to reference the drang (named range) and the cell propertly as i keep getting an error.
Everything in the below code works except the parts below in blue
details:
I have in column X lots of names and in column Y (dynamic column
anges as the users chooses them as per the code) and I want to loop through all names in 'X' and if there are multiple of the same names then for the corresponding 'Y' row entry of each be checked and if they are equal (same $ value) then for one of them of cells in the Y column to be cleared.
Basically if the same name appears more than once it will most likley have the same $ value and if i do a calculation on the $'s it will be 2,3,10 times the amount it should be, hence the need for this .
As per the below code I am trying to use 2 for Each loops though I keep getting an error when trying to reference the drng range which has the values in them..
View 12 Replies
ADVERTISEMENT
Jul 14, 2008
I am trying to find a macro that will clear duplicate entries in a column of data, and then move to the next column and repeat the process until it gets to a blank column.
There are blank cells between entries in a column. I need to keep the data unsorted as the cells are linked to others in the row, therefore I dont want to delete the cells, just clear the contents.
View 11 Replies
View Related
May 25, 2014
I have a column with various values in, string and numeric. The strings I want to keep have "," in and letters one side and "space" on the other. All the cells I want cleared do not have ","
The rest of what I'm using works fine accept this line which forces an error.
[Code]....
View 5 Replies
View Related
Dec 10, 2013
Checked for a while now for a match in my query but can't find one that matches. I have a column of data to which has multiple values in each cell separated by a comma I.e 1,1,12,37
I copy this column into a new sheet a:a then I'll run text to columns to separate the values into there own cells so the following columns now show this
a1 =1 b1=1 c1=12 etc
I'm now stuck as I need to clear the contents on the cells within range a1 to k1 that have duplicate values.
end result is a1=1 b1 is now blank c1 =12 etc
View 6 Replies
View Related
Jun 8, 2009
I have a spreadsheet that I have created as a door schedule for faculty members at our institution of higher education. The intention is for them to fill-in their office hours and courses along with a few other bits of information. One sheet should have their teaching and office hours and one sheet should not.
These are the cells that should be cleared once the sheet has been duplicated (F30, F31, G30, G31). Once the sheet is duplicated and those two cells' contents has been deleted, both sheets should be printed. Ideally, all of this would be initiated by clicking a hyperlink or something like that.
View 9 Replies
View Related
Apr 15, 2008
I have a workbook with 12 sheets, 1 for each month of the year. Each month has around 30,000 user IDs on it (this is a log of each time a user logs into our website). What I need to do is find out how many unique users have logged into our site for the whole year, or in other words, remove duplicate user ids accross the workbook. I realise that this will probably destroy my processor, so was wondering the best way to do it? I also have all this information in ONE spreadsheet if it would be easier? I just copied and pasted each month into a column (Jan is column A, feb in B, mar in C etc) I ran some code on this sheet to remove dupllicates from column A:E but this was taking AGES!
View 5 Replies
View Related
Nov 12, 2008
ColA
there was a dog that jumped over
there was a dog that jumped over the fence
Everything is in ColA. We are on excel 2007. We need to highlight these two are duplicates based on matching the first 40 characters.
View 4 Replies
View Related
Apr 2, 2007
In microsoft word you can clear find criteria like below.
With Selection.Find
.clearformatting
.Replacement.clearformatting
.Text = ""
.Replacement.Text = ""
.Forward = True
.Wrap = wdFindStop
.Format = False
.MatchCase = False
.MatchWholeWord = False
.MatchWildcards = False
.MatchSoundsLike = False
.MatchAllWordForms = False
End With
View 8 Replies
View Related
Sep 15, 2014
My tab ("dados"), has 21 columns, i need clear only column "L"
VB:
Sub CompareRemoveDupes() ' Stanley D. Grom, 04/06/2012
' [URL]http://www.ozgrid.com/forum/showthread.php?t=164160[/URL]
Dim wP As Worksheet, wN As Worksheet
[Code]....
View 1 Replies
View Related
May 17, 2008
I am currently trying to write a macro that will search a column for different strings. These strings are inside the cell (as in it is not the only value in the cell) and then copy the entire cell over to another column, then delete the two cells to the right of the originally found cell.
Heres an example of what I want to:
There are four columns, the first has a name with both the first and last (amanda white)the second just the first name (amanda), the third just the last name(white), and the forth an organization name. if the first column contains an organzation name, it has to clear out the first name and last name columns, and copy the name column to the organization column.
NAME | FIRST | LAST| ORG|
amanda white amanda white
mike jones mike Jones
pizza hut pizza hut
I have a list of organization keywords to search the first column (e.g. enterprise, variety, management, pizza). I want it to recongnise the "pizza", copy that entire cell over to the organization column and delete the first name and last name for that row.I've been trying to modify a code like this but i can't seem to make anything work.
VB:
FindWhat = "pizza"
For Each Cell In Range("B2", Range("B" & Rows.Count).End(xlUp)) [code]....
View 5 Replies
View Related
Feb 9, 2006
Col cCol dFormula
Lease TermCompany #6023%
3637%
4843%
6052%
12620%
247FALSE
368FALSE
48105%
609FALSE
Residual Table
Company #
127
438
569
10
Col b
Lease TermResidual %
1210%20%9%
245%9%6%
364%7%3%
483%5%2%
602%3%1% ......
View 10 Replies
View Related
Feb 20, 2008
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
View 4 Replies
View Related
Feb 20, 2008
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5
123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
View 2 Replies
View Related
Apr 10, 2014
I have a list for example...
Ian
Andy
John
David
Ian
Andy
John
David
Max
I want to search or filter the list and find the only non matched record in the list and put this in another sheet ie max as this is the only unique name in the list, all the others are matched. Everything I have tried eg filter for unique records returns ian andy john david max, which is not what I want.
View 4 Replies
View Related
Apr 19, 2014
I have a Meeting Place and Cities Table(too large).An example attached as a file and explained waht is wanted.
View 2 Replies
View Related
Oct 2, 2008
=MID(M11,FIND($V$6,M11),LEN($V$6))
I use the formula above to return the the matching word in v6, from text within m11. If theres is no match it returns #value. is it possible when theres no match to return "Not Match" in the cell instead
View 2 Replies
View Related
May 6, 2013
See the attached workbook.
Alright: Sheet2 is a list of lines that have a parallel match, sometimes more than one. This example has 3 lines with slope 0.18 and I've added a few extra at the bottom for the sake of the example.
Worksheet Intersect is a working page where in the Bordered Box, highlighted in Green is full of parallel lines from Sheet 2. Sometimes there's none so I have a column to the right that says true if the line is on sheet2 and false if not. There's a helper column to the right to count up the trues and false.
I need to have laid out below, all the matches on Sheet2 to the green highlighted lines but not the original line that made the True. There could be lots of them, there could be one, this example has two for the slope of 0.18 and one for all the rest.
How do I write formulas to pull the matching slopes (column A) and y-intercepts (column B) from sheet 2, if there's an unknown amount and then list them on the intersect page?
The results will look something like:
True 1...............True 2...............True 3..............True 4................True 5
.36........2.00.......18.......24.01.....-0.32.....3.00....1.04......4.00 .......0.83.......5.00
..........................18.......21.32
View 12 Replies
View Related
Jun 11, 2009
I want to loop through ID Column and find the matching number in Record No.column, and hightlight the entire row when match is found. The code I am running can only work for one cell at a time, but I want to run one time.
View 11 Replies
View Related
Feb 21, 2010
I have a total of six columns divided in to 3 columns. Each column has a number in it. I need a formula to tell me which number from the 2nd 3 columns match the number or numbers from the 1st 3 columns.
EX.
123 367 ..... the #3 is a match. the number 3 is in the 1st position. I need a column to relay this information
View 7 Replies
View Related
Oct 14, 2011
I have two worksheets each of which includes a left column of unique email addresses (at least, unique within each lsheet)
The data on each sheet is structured identically. What I want is to generate a list of records that appear on both sheets.
View 2 Replies
View Related
Sep 9, 2013
i have a worksheet that is about 100rows x 100columns.
i would like to create some code to find a certain record. for example..
a1 a2 a3 a4
the record might be " tony tony alex tony"
basically, this group of cells could be any where in the group and i need some code to search the worksheet and then outline it. i just want to be able to find a certain block of cells and outline it.
View 2 Replies
View Related
Dec 24, 2006
How do I create a formula that will count the occurrences on each row within the range F7:H106 where the single digit in FJ6 is paired with the 2 digit value in FF7. Match in any order.
example
If FF7=00 and FJ6=1 (Match 00 with 1 in any order)
f7:h7=010, match, count 1
f8:H8=059, no match
f9:h9=100, match, count 1
f10:h10=001, match, count 1
f11:h11=007, no match
Result=count=3
View 9 Replies
View Related
Feb 19, 2009
In a row on the spreadsheet I have a range of dates from 19/09/2008 to 19/06/2008 mainly with a weekly interval.
I want to incorporate into the macro a find function so that it can determine the first occurrence of a specific month and return the row number.
View 9 Replies
View Related
Apr 28, 2007
Using the Find Function in VBA with pattern matching, I want to find the End statements in my code. How do I stop it finding the End If statements, of which there are hundreds maybe thousands. I tried End[ ][ ][ ] and End[!I] etc but they exclude the End statements as well.
View 3 Replies
View Related
Jun 16, 2008
I have a spreadsheet with 65000 potential client surnames in column c, with contract details in neighbouring columns. I have also a spreadsheet of 6000 actual client surnames. I would like to search the large spreadsheet to make sure that none of the clients are contained in it, or if some are to highlight them.
Do I use advanced filter or vlookup? I use excel 2000 and due to the size of the first spreadsheet it takes 6 minutes to open/save e.t.c.
View 4 Replies
View Related
Nov 7, 2011
I have multiple items in the similar column. I need to find the row number of the last one. For eg. In column B1 to B5 I have Apple in the first 4 cells and Mango in the last cell.
Apple
Apple
Apple
Apple
Mango
I need the Row number of Last Apple i.e row 4. How can I achieve that using VBA?
View 9 Replies
View Related
Jan 28, 2014
I am an inventory specialist for a dish network company and as such I track inventory in and out of technicians vans, both serialized and not. I've done a great deal of work updating a broken excel sheet they use so that it functions again but I didn't build it. I've learned a lot but I'm only self taught with Excel and had never even heard of VBA code until I dived into this project. It's a huge puzzle and is now my "baby".
Anyway, basically I have one sheet that has a list of all the items I need to keep track of. One section of this Sheet1 I've designed to have cells with dependent drop down lists that are Named Ranges on Sheet2. The tech can choose item A B or C in the first dropdown box and then the next cell shows only the serial numbers from the named range on Sheet2 of A B or C. (Was that english?)
Since the receiver comes out of the techs van once its used I want to figure out a way to delete the serial number that the tech has chosen without deleting the row or cell, just the value in it so that it can then have another serial number typed in. How can I do that?
Also, since I'm here, my 2nd drop down list seems to always start scrolled down and I have to scroll up to see my serial numbers. Why is that? The receiver list starts at the top but the dependent one doesn't...
View 2 Replies
View Related
Feb 26, 2014
I've got a problem which I'd like to do without using VBA if possible. I have 2 rows, one with text and one with numbers. I need to go through all the text, find the text that matches and add the number in that row.
That's very poorly explained so I've given an example below:
text 1 20
text 1 10
text 2 10
text 1 20
text 2 10
I need the formula to do this:
text 1 50
text 2 20
View 6 Replies
View Related
Apr 5, 2009
Need to find average (see attached file) of certain rows of column C that correspond to letters on column B that match any letter on column A. Basically if column B has the same text as in one of the cells in column A then number across in column C should be used to calculate the average. In column D I have entered(manually) all values that satisfy the above condition and obviously the average should be 1 if formula is correct.
I have tried to use AverageIF function but not able to do it as there are many conditions. Another thing to consider is that conditions change (column A content) so I need to use cells that have information rather then actual text in it.
View 5 Replies
View Related
Feb 27, 2012
Macro: Copy selected cell to another sheet next blank row
I'll just make this simple to understand.
*Again, I have first sheet, named "SUMMARY"
*On Column A, I have list of names
A1: Star
A2: Moon
A3: Sun
A4: Clouds
*these cells corresponds to the Cells of different sheets
A1: Star = E3 of Sheet 1
A2: Moon = E3 of Sheet 2
A3: Sun = E3 of Sheet 3
A4: Clouds = E3 of Sheet 4
this is what I should get:
1. I select the cell A1 as an active cell
2. press the button (with the macro on it)
3. I will automatically go to the sheet where "Star" is located
View 2 Replies
View Related
