I need to make the Red X at the top firght of my user form "End" rather than "Exit Sub" which I think it is trying to do now, as simply exitting the sub returns it to the previous sub which opens the form again.
View 4 RepliesWhen I click on the userform that opens when the workbook does I get this error:
Run-time error '13':
Type Mismatch
This is the code highlighted
DT=UserForm1.TextBox3.Text
I was wondering it were possible to reference an error. I'd like a cell to have white text if $O19 produces a #N/A error. I tried formula
=($O19=#N/A)
and the formula
=($O19="#N/A")
I'm getting a 'Run Time Error 91' saying that 'Object Variable or With Block not set'.
Error lies here:
Code:
Me.lstCategpry.Column = CustRec.GetRows(Fields:=Array("name"))
Userform Initialize:
Code:
Private Sub UserForm_Initialize()
[Code].....
I am getting a run time error # 9 when I run a macro that calls a Userform or when I try to run code in a Userform module. The code performs beautifully on my computer, but it did not work on a coworker's computer. It ended up working on 3 out of the 5 computers I have tried it on.
I have tried changing security settings to low, and a bunch of other stuff, but I cannot get the code to run on the computers that get the run time error on them when I try running the code on them.
I get the run time error when I try to load or show any userform in the workbook and I get it if I try to run code that is in the userform module. However, if I paste the code into a regular module and run it, the code runs fine.
Does anyone know what could be causing this? I don't think my code is causing the problem since it runs on some machines, I am guessing there is a setting that is preventing Excel from calling Userforms.
I have a button, Private Sub CommandButton1_Click, on a sheet that shows a userform. This is the bit of code that gets tagged with the run time error. The userform has a refedit control on it allows the user to select a cell and then hit ok to run the code or cancel to, well, cancel it.
Code for the button that gets tagged with the run time error:
Private Sub CommandButton1_Click()
frmLoadTrade.Show 'calls userform
End Sub
Code in the Userform Module:
Private Sub cmdCancel_Click()
TradeTicketSpreadsheetName = ThisWorkbook.Name
Unload Me
Workbooks(TradeTicketSpreadsheetName).Activate
End Sub
I included a couple screen prints showing that the form exists, and that it is not misspelled in the code. What should I look for?
View 4 Replies View Relatedi got the userform to popup when the workbook is open and the buttons work fine... only problem is when i click on a button, it will ask the user yes or no... if the user press yes, it performs the required macro without any problem... but when the user press no, not only it will close the question, but also closes the userform... I would like the 'no' to close the question but not the userform...
View 4 Replies View Relatedhow to get a userform by double clicking a cell.
I have created a userform, (my first one)-very simple form, i have created a massive textbox, so when i doubleclick a cell in Sheet 1, userform pops up and I can write comments.
I am not sure how to write a code for this? I know it will have Private Sub Doubleclick, not sure on the rest?
I would like to make a userform where additional textboxes (and labels) can be added to the form by clicking a command button. Is this possible to do?
For example, a userform which has:
Contractor 1: (TextBox)
and underneath this have a command button which when clicked will add another text box e.g.
Contractor 2: (TextBox)
I'm new to vba so haven't got a clue how to go about making this userform or even if it is possible.
I get a "Run-time error '9': subscript out of range" error when calling a userform.
The code opens a reference spreadsheet then shows a userform with a combobox and two command buttons (Continue and Quit). The userform has a private initialization sub-routine to populate the combobox with values from a list on the reference spreadsheet. When the userform is called the error comes up.
Here's my problem: The code was written on my computer and saved as an Add-in. The add-in has since been installed on a number of other computers and works properly. Recently I tried to run the code and this error started popping up, don't know what changed. All versions of Excel are the same and haven't changed.
BRF = ActiveWorkbook.Name
If BRF = "Blank upload.xls" Then
Workbooks.Open path & "QC Data AnalysisQCDA ref.XLS"
OtherBRF.Show
Workbooks("QCDA ref").Close SaveChanges:=False
Goto 1
End If
I have a worksheet where I created a button for the user to click on when they want to generate the chart, but when the button is pushed, it goes to my code in the VBA editor and gives me the error I've attached below. I have no idea what that means and none of my code seems to be highlighted.
View 3 Replies View Relatedthe spreadsheet needs to be copied to a directory called "C:downloads" as it contains a ODBC query to itself (In reality, this is a query to an External Oracle Database)
On loading, it should pop up a simple userform, with a combo and two command buttons, which when pressed takes you to a (hidden) tab that displays a pivottable.
All works well until I try to close /save when 60% of the time, Excel encounters problems and closes and will not load up the file the next time until either quit excel or disable macros. Messages include "file/path access error", "I/O Error" or get restarts excel.
On a casual run through, I expect you might report back that "All worked ok for me". Please can you give it a bit of a thrashing, comment out the userform show, save the file (frequently) becuase i assure you it will break ultimately!
This is a brand-new file and I've tried it on about 5 different PC running different versions of Excel and generally get the same result.
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
My
I am using this formula:
=IF(O6>0,"",(VLOOKUP(A6,Material!A2:G43,7,FALSE)))/2000*O6
and it produces #N/A in the cell that contains this formula. If cell A6 has an item selected in it I made from data validation-list then the output is $0.00.
How can eliminate anything from showing if the list is blank in cell A6?
I have data in range J2:J365 , H368:H401 & J403:J827. i want to check wether this range have negative values or not if yes load all negative values in the listbox1 by clicking checkbox.
View 3 Replies View RelatedI have a userform that has a time field on it and then the userform displays the time as a number.
Ex. I entered 11:00 AM in the Time of Contact field and the form displays it as 0.458333333333333.
I have a userform that time stamps on my userform as soon as i open the form, is there a way that when I submit, that the amount of time that I was on the call to be put in my column on my worksheet as minutes?
View 2 Replies View RelatedI am trying to retrieve the top 10 or so data from a large list from mutliple columns and if there is a value the same I will recieve a #N/A error by using Index and Match. Is there anotherway of sorting the most rated without using Autofilter which is not pratical considering the setup of the spreadsheet. I have attached and example of what happens with duplicate values from a file I found on this forum and adapted.
View 7 Replies View RelatedI have a column using Vlookup to find values that I want to SUM.
Some of the look up values produce a #N/A and result in a total sum of #N/A.
How do I get the SUM of a column of numbers when all of the cell values are not in fact numbers.
How can I generate all the combinations a 3 digit number produces? Example 123 can be written as the following:
123
321
213
312
132
231
I THINK this is all the combinations it will produce.
I'm not sure why this is happening, but every other time I run this one specific macro, I get a "Run-time error '1004': Paste method of Worksheet class failed". I even tried running this macro, then running a different one, then running this again, but I still got the error every other time.
Every time I get the error, it highlights this line of
Sheets("Regenerate Request").Paste
This is all of the code up to where I get the error:
Sub YesRegen()
' after user has hit Yes on the RegenerateRequest macro, this posts the new request to
' the log, generates the new file and attaches it to an email
Application.Run "LogUnprotect"
Range(Range("A" & ActiveCell.Row), Range("K" & ActiveCell.Row)).Copy
'Selection.Copy
Sheets("Regenerate Request").Activate
Application.Run "RegenFormUnprotect"
Range("A40:K40").Select
Range("A40").Activate
Sheets("Regenerate Request").Paste
I'm outputting some cells to a CSV. At first I tried using the SaveAs function but that renamed my worksheet and didn't work for ranges (as far as I know)
Sub Export()
'Set myADPFile = "C:ADPPCPWADPDATAPRSHWEPI.CSV"
Dim myADPFile As String
myADPFile = "C:PRSHWEPI.CSV"
Dim x As Byte
x = 5
Open myADPFile For Output As 1
While (Not (Sheet3.Range("A" & x).Value = NA))
Print #1, Trim(Sheet3.Range("B" & x).Value), ",", _
Trim(Sheet3.Range("C" & x).Value), ",", _
Sheet3.Range("D" & x).Value, ",", _ ..........................
The values are correct. However, the excess amount of spaces is not. Using the Write function just encases everything in quotation marks. Replacing spaces isn't a good solution because the first row MUST be in that format, and removing all spaces would require more code to put spaces back in. Is there a way to get rid of all the excess spaces surrounding each value?
When I publishing from Excel document to PDF it produces differently sized pages as shown in attached. Is there a way I can achieve a same size page view without having to change the font size and page layout of the source Excel document?
View 4 Replies View RelatedThis is my formula with concatenation: =K3/K1*100 & "c" & " Each"
This is the result of the values in K3 divided by K1: 6.41666666666667c Each
I would like to limit the decimal places to two: 6.41c Each.
I have tried to format the cell and none of the formatting options have any effect.
If possible I would like to use the rounding function but I do not know how to combine the formula + text + rounding.
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
Excel 2010
I have the following SUMIFS formula that produces the desired results until I get the the last qualifier, displayed in red:
=SUMIFS(JBHAMOUNT,JBHMONTH,C18,BNSFCATEGORY,B20,BNSFLOCATION,"Alliance")
The result of this formula is: #VALUE!
After doing some searching I found a macro here which imports multiple text files into one workbook, keeping each text file as a seperate worksheet, each worksheet named the same as the original file name (minus the .txt extension).
However, it adds a blank line between each line of text. So I get this:
Pinging 172.27.133.29 with 32 bytes of data:
Reply from 172.27.133.29: bytes=32 time=232ms TTL=62
Reply from 172.27.133.29: bytes=32 time=62ms TTL=62
Reply from 172.27.133.29: bytes=32 time=65ms TTL=62
instead of this:........
Pinging 172.27.133.29 with 32 bytes of data:
Reply from 172.27.133.29: bytes=32 time=232ms TTL=62
Reply from 172.27.133.29: bytes=32 time=62ms TTL=62
Reply from 172.27.133.29: bytes=32 time=65ms TTL=62
This doesn't happen when I use the import wizard, or when I just open the file from the File -> Open menu.
My text files are always the same format (number of lines, etc.), so it's easy to delimit and insert forumlae as needed, but those extra lines are breaking a macro I've previously written to parse the data.
I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...
VB:
Sub GetRangeName()
Sheets("TOTAL").Select
[Code].....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username
Run-time error '1004' Application-defined or object-defined error. I am trying to use this
View 2 Replies View Related