Userform - Adding Textboxes (and Labels) By Clicking Command Button
Apr 18, 2012
I would like to make a userform where additional textboxes (and labels) can be added to the form by clicking a command button. Is this possible to do?
For example, a userform which has:
Contractor 1: (TextBox)
and underneath this have a command button which when clicked will add another text box e.g.
Contractor 2: (TextBox)
I'm new to vba so haven't got a clue how to go about making this userform or even if it is possible.
View 3 Replies
ADVERTISEMENT
Sep 26, 2006
What command should I use if I want to activate sheet1 by clicking a coomandbutton1 on sheet2?
View 5 Replies
View Related
Jun 11, 2009
I am trying to disable a command button if 4 textboxes are empty. I can make it work if one of the textboxes are empty but not all of them. this is what i have so far.
Private Sub TXT3_Change()
If TXT3.Value = "" Or TXT4.Value = "" Or TXT5 = "" Or TXT6 = "" Then
CommandButton13.Enabled = False
End If
If TXT3.Value "" Then
CommandButton13.Enabled = True
End If
End Sub
View 9 Replies
View Related
Feb 9, 2014
I need the code to calculate the average of 4 textboxes and then put them into the cells, and every time new calculation is given, it is put into the new cell :
i have textbox (1,2,3,4)
my commandbutton needs to the calculation average of the value that is put into those textboxes.
View 1 Replies
View Related
Jul 14, 2007
I have a userform1 on there a combobox1 and a frame1. In that frame1 I want a number of labels to be added named "name" & number. The number varies depending on the value in combobox1. If combobox1 = "1" then I want 20 labels to be added. if combobox1="2" then I want 60 labels to be displayed.
label height=12, width=102, top=6 and left=6
for each following label the top = top + 14
and after each 10th label left = left + 120
If there's more than 30 labels then I need a scrollbar on the bottom of the frame to be displayed and so be able to see the other labels.
If the first value in combobox1 is "1" is selected and all is displayed and then I select "2" that is deletes all the current labels in the frame and then add 60 new labels.
View 9 Replies
View Related
Jun 27, 2014
I have 4 text boxes in a user form where user type numbers. At the end i have another text box(yellow one) that adds these numbers using this code.
[Code]....
In another text box(grey one) user types another number. Then using this code
[Code] .....
I try to add the values of the two previous text boxes. I get wrong result when i use decimals numbers and i can not understand what is wrong.
Attached File : add text boxes.xlsm
View 7 Replies
View Related
Jul 16, 2012
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click()
unloadme
End Sub
Private Sub CommandButtonOK_Click()
With Workbooks("RETS results version 2.xlsm")
[Code] ......
View 1 Replies
View Related
Aug 3, 2007
I just stuck on the basics. I want to add a new sheet through a macro and a button in the same. I am unable to make it dynamic. it is giving me an error:
View 12 Replies
View Related
May 30, 2012
I have a monthly log that I need to keep to track expenses and customers visited. The log is segmented into 12 parts corresponding with each month.
I need to be able to add multiple lines via an input box while maintaining the formulas and formatting of the 2 rows directly above the forms command button (because both lines are filled with a different color) but not the contents?
There will be 12 command buttons in all and the new rows should be added at the bottom (directly above where the button is)
I found this and it works to some extent.
Sub FromFormsCommandBar2()
Dim Btn As Button
with ActiveSheet
Set Btn = .Buttons(application.caller)
btn.topleftcell.entirerow.insert
end with
End Sub
View 2 Replies
View Related
Feb 23, 2007
I have built a Form which displays data from a spreadsheet. The user opens the form by clicking on a command button from the spreadsheet. The Form initially opens with the data from Row 4 of the spreadsheet (because this is the first row of the spreadsheet which contains the data for the form). The user can then sequentially access other rows in the spreadsheet by clicking on buttons in the Form which advance the extraction by one row.
I would like to add a command button to each row of the spreadsheet that would open up the Form and set the values in the Form to the same row which the command sits on.
View 5 Replies
View Related
May 11, 2007
I have a macro which I use to do all sorts of routine things on a spreadsheet for my employees. (you guys helped me with that too. thanks)
I would like to add a command button to this sheet to run series of code and I want to add this to the final step of a macro.
Question, is there a series of code, which would
1. create the command button on the active sheet, and
2. add the required code to the command button, and
3. embed that button and code onto the active sheet all at once.
?
I need to do this regularly so it is a currently manual process I am trying to replace.
Ex. of code I want placed:
Rows("1:1").Select
Selection.Font.Bold = True
This is not the exact code which I will use, but it will help me to understand what I would have to do to make it work.
View 9 Replies
View Related
Nov 28, 2007
I have a user form with combo boxes. The user selects items from the combo box and when they click the command button the selection is written to the spreadsheet. Each time the button is clicked it adds an item to the sheet making a list of items. I am trying to assign a number to each item when the command button is clicked so I have numbered list. Here is my code so far:
Private Sub cmdbtnAdd_Click()
Dim RowCount As String
'Writes user inputs to Active Worksheet when Add Item Button is clicked.
RowCount = Worksheets("Sheet1").Range
("A1").CurrentRegion.Rows.Count
With Worksheets("Sheet1").Range("A1")
.Offset(RowCount, 0).Value = ' This is where I have been trying to code in the numbering
.Offset(RowCount, 1).Value = Me.Combobox1
.Offset(RowCount, 2).Value = Me.ComboBox2
End With
End Sub
View 6 Replies
View Related
Sep 6, 2013
CASH BK
CASHIERS
DATE
CASH
TOTAL
DIFF
SALES
GBP
AR
GBP
AR
GBP
[code]....
above is the sheet template we use on a monthly basis. I would to like to use a command button which will run a macro creating a new sheet with the sheet name each month. The idea is to have a text box and a command button,enter the month in the text box and click the button. A sheet for the month to create at end.
View 2 Replies
View Related
Apr 25, 2007
I'm adding a command button at run time using excels help code;
Worksheets(newWorksheetName). OLEObjects.Add ClassType:="Forms.CommandButton.1", Link:=False, DisplayAsIcon:=False, Left:=325, Top:=24, Width:=50, Height:=20
I want to change the buttons properties including its caption etc.. I've tried using'
Worksheet(newWorksheetName).OLEObjects("CommandButton1").Caption = "Do"
But i get a run time error. Also, the add method doesn't specify what the button is called, any clues?
View 2 Replies
View Related
May 13, 2006
i have a userform on sheet 1, is it possible to have a command button to take me to sheet 2 and leave the userform open in sheet 1, so when i go back to sheet 1 the userform is still open
View 4 Replies
View Related
Jun 23, 2012
How can I assign 2 different functions on one command button. For example, I want my save button on the form to save the data from the text into a worksheet as well as open a new form.
View 5 Replies
View Related
Nov 21, 2009
I can't find anything direct via the web and here so I will ask what will hopefully be an easy question.
I have a form called FIELD_MX and on this form I have a Command Button called Enter ONT Demand Requirements.
When I click the Enter ONT Demand Requirements, I want to display a form called ONT_Demand_Requirements.
I know the UserForm needs to be initialized, but where should it be or am I wrong?
View 9 Replies
View Related
Apr 6, 2009
I want to launch userform A when the user hits the command button on userform B, I already have a macro set up to launch UserForm A and tried adding it to the code but it doesn't work.
View 13 Replies
View Related
Oct 9, 2009
I have a userform from which I need to be able to print a PDF document when the command button is pressed.
User enters the document number in docnum textbox (eg. 123)
On pressing the commandbutton printdoc, I need to be able to print document 123.PDF to default printer
All PDF Documents reside in a network folder mapped to the S:PDFdrive.
If the document is not found I need to display an error message stating this and return focus back to the textbox.
If the document is found I need to display a message stating document sent to printer.
View 6 Replies
View Related
Mar 14, 2008
I have constructed a Userform with two button options - Run a Sub that I have already written and runs fine, the other to close the userform.
how to correctly assign the completed macro ( Name: "Run_Report") to the button click action. The code below is what I have, but it does not run:
' This is the run macro code
Private Sub CommandButton1_Click()
Run_Report
End Sub
' This is the quit UserForm code
Private Sub CommandButton2_Click()
Unload Me
End Sub
The quit command works, just not the run macro - do I need quote marks, parenthesis, or a .Run command or something?
View 5 Replies
View Related
Dec 23, 2013
Userform2 is popped up from another userform3.
How can I have userform 3 when clicked fill in a textbox on userform2 and then finally assign it to cell F3 on my worksheet.
VB:
Private Sub CommandButton2_Click()End Sub
So I need commandbutton2 (which needs to retain a value of 1` when clicked ) on Userform3 to assign the value of 1 to TextBox44 (Which is using control Source F3 so the value here ends up in F3
VB:
Private Sub TextBox44_Change()
If TextBox44 > 5 Then
MsgBox "Your entry must be part between 1 and 5", vbCritical
Exit Sub
End If
End Sub
View 2 Replies
View Related
Feb 18, 2009
I have a few subs that use userforms. They all work ok except that when they are filled out and the final click to close them is done , e.g. command button "OK" or "Cancel", the button is slow to respond. I usually end up having to click twice, or click and hold for a moment before it will register.
It appears to me that the program is hanging around in the last highlighted box the cursor was in and its slow to notice a command button has been pushed.
View 9 Replies
View Related
Mar 24, 2014
I have a combobox that is referenced to a named list 'ListReels'. There are only 8 choices (Reels 1 -8), and each has an accompanying worksheet in the workbook. The user selects a reel, then inputs other information. When an 'Enter' command button is clicked, I had like the data to be entered onto the next available row of the worksheet with the same reel name (eg, if reel 2 is selected from the combobox, then the data should be added to the Reel 2 worksheet on the next blank row.
View 4 Replies
View Related
Apr 8, 2009
I'm trying to make a command button copy the text from a text box on a multipage control to the active cell in the sheet. I have been able to make it paste the text once it is manually selected and copied to the clipboard but that is all. I've tried recording a macro but that doesn't seem to work in the userform. I need it to copy the text from the active multipage tab (from a textbox) and paste into the sheet's active cell.
View 9 Replies
View Related
Mar 11, 2009
I have a UserForm and what I'm trying too do is change the color property of all the labels on the form simultaneously.
View 9 Replies
View Related
Jul 8, 2014
I have created a UserForm that has a ComboBox and depending on the number selected I want it to show that number of Labels/TextBoxes...
So if I select "0" nothing is shown, if I select "1" one set of Labels/TextBoxes is shown, select "2" and two sets of Labels/TextBoxes are shown... but also if I have selected "2" and then select "1" I want the second set to be hidden again...
Also I know I should have renamed the Label/TexBoxes to make it easer but I was adding things and making it up as I went along...
I'm using Excel 2010 on windows 7.
Code:
Sub UnHide_NewRoutings()
If (Engineering.ComboBox2.value) = "0" Then
Engineering.Label4.Visible = False
Engineering.TextBox5.Visible = False
Engineering.Label9.Visible = False
Engineering.TextBox9.Visible = False
[Code] ..........
View 3 Replies
View Related
Apr 17, 2014
I have a userform with a command button which fires a macro.
everything works fine so far.
my problem is:
I would like to add a msgbox at the end of the macro which confirmes "successfully completed".
I cannnot simply add the msgbox at the end of the macro. don't know what I'm doing wrong.
(see below)
Private Sub CommandButtonOK_Click().
If Me.OptionButton1.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Government Securities"
ElseIf Me.OptionButton2.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Corporate Bonds"
[Code].....
Unload Me
Application.ScreenUpdating = False
Sheets("MySheet1").Select
Application.ScreenUpdating = False
'run macro
MyMacro1 (adds, hides and deletes various sheets)
MyMacro2
[Code]....
View 2 Replies
View Related
Jan 20, 2014
I have a userform and want to disable the command button unless a text box contains text. what I need to do?
View 2 Replies
View Related
Apr 14, 2009
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies
View Related
Apr 28, 2013
I have 3 text boxes. and a numpad of 9 command buttons.
I wish to click on one text box and then click each of the "numpad" command buttons to populate the actve textbox with the number buttons that i click. What VBA code would i use to do this?
I think i can code something like this quite easily, the bit i am struggling with is how to make it so that only the active textbox text is amended.
View 1 Replies
View Related