I am trying to write some code to run through a workbook and identify dead ends i.e. cells with no dependents. I can isolate the cells I need to check and tried to count dependent cells to see which had none. My code to do this is:
If Cell.Dependents.Count < 1 Then
This creates "runtime error 1004: no cells found" when a cell with no dependents is found. I have tried using ISERROR and ISNUMBER and a few other things to either trap this error or turn it into something useful. It seems that whatever is returned from my expression is not an error code or a null or a number.
I have a two worksheets of workbook named LC worksheet and second one Account work sheet.
Data from LC worksheet likned into the Account worksheet at Column K and Column V.
I want to highlight cells in LC worksheet which have no dependents or have duplicate dependents at Column K and Column V into the Account worksheet. Built in trace dependents is time consuming and useless.
I would like to trace dependents of all cells <> "" in column A of a sheet "Tickmarks". If there is a cell in column A which has a value, but does not have a dependent I would like that value to be stored. When the trace dependents check is done for all the cells with values in column A, I would like to display a msgbox with all the cell values collected above.
Eventually, I will be trying to locate the cells with no dependents but with values in Column A and replace them with cells with dependents and change the dependent links to the updated cells.
I have attached an example.
Sub Trace_Dependents_Tickmark_Sheet()
Dim RowCounter As Integer RowCounter = 3
'Select firsct cell with t/m & show dependents Range("A" & RowCounter).ShowDependents
' Loop until RowCounter = 200 Do If Range("A" & RowCounter).Value = 0 Then RowCounter = RowCounter + 1
Here's my problem... Column A contains employee name & column B contains Team Leader name of the respective employee. Range D1:G1 should contain names of team leaders from column B. After that, depending on the name populated in D1, cells going downwards from cell D2 should contain name of employees of that team leader. Similar thing should be repeated for columns E, F, & G. If an employee shows up under two team leaders then it should be displayed under both lists.
Is there any formula/VBA code which can do this? Been after this for last 3-4 hours and now just lost in a maze of various Index Match combinations and array formulas..
I am working on a tool to highlight cells that have dependents but no precedents. This would be useful for me as I build a number of models and handle models built by others.
I want to be able to easily see where model inputs are and inputs will always be cells that do not have precedents and do have at least one dependent.
I have played with a number of methods with very little success. Is there an easy way to test whether or not a cell has a precedent or dependent within the workbook?
for cell in range
if cell.does.not.have.precedent and cell.has.dependent then cell.Interior.ColorIndex = 35 end iff
next cell
I found this in an older post but I cant get it to work at all.
Sub atest()
Dim rngA As Range Dim sngA As Single
For Each rngA In Selection.Cells If Len(rngA.Formula) > 0 Then On Error Resume Next sngA = rngA.DirectDependents.Count If sngA = 0 Then rngA.Style = "NoDeps" End If End If Next End Sub
I currently have a spreadsheet that i am using to track invoice pages when I receive them. I have added a conditional format on the worksheet that turns the Date red when each invoice is due and i manually shade each cell grey when the invoice is received, however as i have many invoices due on the spreadsheet its a bit dificult to track all of them... i have been told that a VB code will help. (I am new to this)...
I want to put a Command button on the spreadsheet that will take me to the next cell that has the text highlighted as red and the background color is white i.e not shaded.
The code below will locate and select cells containing Kenny. What I want to do is create a little search cells(C5) on my spreadsheet and have the code reference whatever is typed into the search cell. I'm sure it's a simple adjustment. I've tried changing the What:="Kenny" to What:="=C5" & What:=C5 all without success.
Sub find() Cells.find(What:="Kenny", After:=ActiveCell, LookIn:=xlValues, LookAt _ :=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _ True).Activate End Sub
I have 26 ranges defined on my worksheet sheet3. Each range is 10 rows high and 4 columns wide. On my sheet1, I'd like to be able to go automatically to a specific range on sheet3 (I need to provide the choice to go to any of the 26 ranges), selected perhaps by a combobox. The ranges are building occupancy groups like A1, A2, B, E, R1, R2, etc. (26 of them). Then I'd like the user to look at each row in that particular range, select one, and then have the four values in that row placed in corresponding cells on sheet1.
I have this set up now using a four column combobox, and it works just like I want, except that only the first column of data is displayed after a row is selected. If I could get those four cells of data as they appear in the combobox inserted on sheet1, I'd be fine. But I can't. So I'm looking for a work-around. Basically, my goal is to get a specific row of data (4 cells wide) from my named ranges copied into cells on sheet1. But I need to be able to get to the correct range automatically.
I have a spreadsheet where a date is entered in column A with data in B-F. I am trying to write code to look in column A for a specific date and enter additional data into columns G-L on the same row. It needs to be able to skip the rows that are blank. So I have the dates of 12/1, 12/2 and 12/3 in column A rows 1,2 and 3 and I want to enter data for 12/2 on row 2 skipping the blank cells in row 1 for 12/1. Here is the code I have below.
VB:
Private Sub CBSecure_Click() Dim my_name As String Dim r As Variant Dim l As Long sFind = DockDoorCal.Value If Trim(sFind) = "" Then Exit Sub
When tracing precedents (or dependents) and the worksheet icon is pointed to, I understand that it is referring to another worksheet. Is there a way to discover which worksheet and/or cell?
I'm disecting someone's spreadsheet to automate it.
I'm looking for some code that will make a list or table of cells with dependents (not on the active sheet) and show what the dependent is. I'm assuming the code would list all values or formulas on the active sheet that get used somewhere 'NOT' on the active sheet.
My results would be basically 2 columns. Column 1 would be a list of tab name & cell refrences from the active sheet when the macro was run and column 2 would be the tab name & cell reference of where the data goes within this book.
I am baffled because one worksheet I can cut/paste and none of the reference cells whether they are dependents or precedents change--in other words, all formulas remain exactly the same. I switch over to another tab in my back-end and the formulas change when cutting/pasting cells.
I'm an experienced Excel user working with very large Excel files that contain many sheets with thousands of formulas referencing various cells on different worksheets. I've been searching for an advanced solution for Excel and I am actually having doubts as to whether it actually exists on the market. (If it doesn't take this idea for free!)
I need a program that could generate a visual map that displays different cells and the links among them. For example, such maps are used in social networking to show connections among people - an example here.
In the end I would have a similar map and it would show me which worksheets are more or less isolated (i.e. don't reference directly any other cells).
I need to select in a sheet the cells which have name reference to see if the whole sheet is dependent , i have tried to trace the dependents and precedents but that didnt work,
Dim c, DataRow With Data Set c = . Range("A5:A350"). Find(KPI, LookIn:=xlValues) If Not c Is Nothing Then DataRow = c.Row End If End With
Now,If KPI is for example = "Favourite Hotel" and if i have data that looks like :
Favourite Hotel - London Favourite Hotel - Cardiff Favourite Hotel Favourite Hotel - Birmingham
Then it seems to not look be looking for an exact match (e.g. Favourite Hotel) and rather is finding the first item in the list that contains the KPI string (E.g. Favourite Hotel - London).
I’m looking for a code that finds all duplicate words in column A & B and change the font of the found duplicate word in column B to ColorIndex = 11 and .FontStyle = “Bold”
I need this code to run frequently and possibly we can combine it with http://www.mrexcel.com/board2/viewto...272792#1272792
The wb is a dictionary and as I’m adding new words in new rows the wb needs to update. It is of course mostly important it updates when I open the wb, but it would be interesting if it could update for every new row (word) added as I might not want to close and re-open the wb just for this.
i need a macro that will look in column B and find the following rec codes, if found then keep these codes else delete (Entire row) for all other rec codes in this column,
I have a workbook with several sheets that get info from sheet"Main BOM". I use a =Main BOM(a6) type formula on the top row of other sheets where info is needed and I drag that down to the end of info on the Main BOM to get the info into other shhets of the workbook. How would I alter this code to find the last row of data on the Main BOM tab and only drag down that far? Or would I need a completly user written macro? This is a recorded macro.
Sub DragDown() ' ' DragDown Macro ' Macro recorded 2/25/2009 by David D ' Sheets("David,Jimmy--To Proto").Select Range("A16:E16").Select Selection.AutoFill Destination:=Range("A16:E47"), Type:=xlFillDefault Range("A16:E47").Select End Sub
Have a cmd button and text box. I need to enter a word in the text box, hit the button, and have excel show me where that text is at on the worksheets (numerous sheets). I have tried unsuccessfully suggestions, but all want to replace the text with something. I do not need to replace the text, just find it.
I am writing a vba code in which the user can change their old password with the new password. For Eg- User A has password B. He wants to change his password to C, so everytime he logs in with new password, he is able to enter into the file. However, i have no idea what exactly i could do(i mean the codes in vba).
I would like to obtain a table in the following format where I can find
ID HostLocation NDaysinHost marina.silva USA, Norway, Bolivia, Italy, Ecuador... 100,45,67,8,9... tatiana.gottig Venezuela, Chile, Peru, Canada 89,54,32,6
Searching in the net I found the following code:
VB: Sub groupConcat()Dim dc As Object Dim inputArray As Variant Dim i As Integer Set dc = CreateObject("Scripting.Dictionary") inputArray = WorksheetFunction.Transpose(Sheets(1).Range("A2:C9").Value)
[Code]....
However I only obtain the first two columns concatenated. It says that for more columns repeat the loop, however I did and the result was not the expected, it returned me the same two columns again concatenated. How can I arrange this to fit my criteria?
I am using the Vlookup function to find a particular code in one sheet then give me the cost data that is associated with that code and put it into a similar cell in another sheet. It will work fine if I use (for example) A2 to E39 as my table_array. This would be fine if I only had 38 rows of data to look for the code on. However I have thousands of rows of data that need to be checked. Therefore when I change the table array to anything greater than E40, the vlookup will not work and it will only return a value of zero instead of the actual cost data. This is very weird and does not make sense that anything is wrong.
The only thing I can think of is that the vlookup function has a limit on the number of rows that it can look for data in. However, I did not think that it had a limit at all.
In the attached file I have two tables Table A illustrates the dates with start, end and code, Table B where I want the formulas that they would find how many days a code is in the month.
From F4:I37 I manually entered the day, I would calculate automatically.
I am writing some code where one column is selected and a value is searched for in that column. If found the code continues on its way manipulating the data. The issue is that the value being searched for will not always be there which results in an error. Is there a way that I can just tell the macro to continue running if the value is not found.
On a second question is there some code I could write that would select all the rows with the number 1 in column V and delete them rather than doing the way I am here?
