Find/Search Code Tweak In Cells
Jun 12, 2009
The code below will locate and select cells containing Kenny. What I want to do is create a little search cells(C5) on my spreadsheet and have the code reference whatever is typed into the search cell. I'm sure it's a simple adjustment. I've tried changing the What:="Kenny" to What:="=C5" & What:=C5 all without success.
Sub find()
Cells.find(What:="Kenny", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
True).Activate
End Sub
View 2 Replies
ADVERTISEMENT
Jul 8, 2009
I want this code to only stop on rows where cell K has the value "planned"
Though only if you have the checkbox "Only show planned" checked...
I have all the pieces though no idea how to get started?
Private Sub NextRecord_Click()
Dim r As Long
If IsNumeric(RowNumber.Text) Then
r = CLng(RowNumber.Text)
r = r + 1
If r > 1 And r
View 9 Replies
View Related
Mar 18, 2009
I am using the following code to change colors in set of autoshapes (Thanks Colin_L and Norie) and it works fine for the first autoshape but has it has no effect on the subsequent autoshapes. I plan on using the code for about 200 autoshapes, I thought I could just copy the first code and keep adding it on for each autoshape... I am guessing that the code is stopping after the first set and not continuing?
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$C$46" Then
'Change autoshape color to red depending upon cell value, or blank of no value is entered.
With ActiveSheet.Shapes("Rectangle 1").Fill.ForeColor
If Target.Value = "" Then
.SchemeColor = 1
ElseIf Target.Value >= 422 Then
.SchemeColor = 50
ElseIf Target.Value >= 1 Then
.SchemeColor = 10
Else
'it must be less than 1
End If
End With
End If......
View 9 Replies
View Related
Jan 25, 2007
Code such as the one below carries formulas in columns 3 and 10 down to new rows when inserted. However, I need to allow a user to overwrite the formula in col 3 with any text value. But if the user overwrites the formula on the last row, and then manually enters a new record below, then the code in the last row of col 3 does not get copied down. Is there a way to search upward in columns 3 and 10 until reaching the last cells with formulas, and apply the formulas to the new cells in cols 3 and 10 on the new row? Or, is there a way to store the formulas:
=IF(A21<>"",B21,"") in column 3
=IF(B21<>0,IF(C21<>B21,A21&", "&LEFT(C21,2),A21&", "&LEFT(B21,1)),"") in column 10
Storing these somehow would be good if the user overwrites the formulas in the very top row of data (row 2).
If Intersect(Target, Me.Range("A:A")) Is Nothing Then Exit Sub
On Error Goto CleanUp:
With Target
If .Value <> "" Then
Application.EnableEvents = False
.Offset(0, 3).FormulaR1C1 = "=RC[-1]=R2C3"
.Offset(0, 10).FormulaR1C1 = "=RC[-1]=R2C10"
End If
End With
CleanUp:
Application.EnableEvents = True
View 3 Replies
View Related
Jun 26, 2007
The below code works well if it is on the proper sheet, if the active sheet is not active then it errors- Why? I think I have properly qualified the path to the desired sheet I wish to search on.
Error msg: Activate method of Range class failed
And how do I handle this?
Set Ws = Workbooks("ViewRenameDeleteFiles.xls").Sheets("Item Record List")
What = InputBox("Enter the Name You are Searching for its Record#", "Item Name Searching On")
Ws.Cells.Find(What:=What, After:=ActiveCell, LookAt:=xlPart, _
SearchOrder:=xlByRows, SearchDirection:=xlNext).Activate
View 9 Replies
View Related
Jan 4, 2010
With the code below it searches my entire workbook.
What do I need to change so it will ONLY search UnProtected cells in my workbook?
Code: ....
View 9 Replies
View Related
Dec 14, 2006
I want to find a content of ActiveCell only in column "C", beginning from cell C4.What must be in Look in, and Look at?How to accomplish to match whole number,ex. "1" in cell with "1",no to find "1" in "123"
This function searches in whole sheet,but i need only in C column!
Cells.Find(What:=ActiveCell, After:=[c4], LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
View 9 Replies
View Related
Aug 10, 2014
I created a user form that has two textboxes on it. One is to enter a person's name that gets put into column A, starting at row 4, and the other is to enter a number into column B, starting at row 4.
What I would like to do is for the form to search the names that have been entered in column A for duplicates in the same range. If the name is not there already, then I would like it to operate as normal. If it already exists, then I would like the number in the text box to go into column C in the same row as the name.
Here is the code I have already on the Submit button:
Private Sub SubmitButton_click()
Dim emptyRow As Long
Sheet1.Activate
emptyRow = WorksheetFunction.CountA(Range("A:A")) + 4
Cells(emptyRow, 1).Value = Guestname.Value
Cells(emptyRow, 2).Value = Roomnum.Value
Unload Name_usrfrm
End Sub
Is this possible? I have to make it more complicated, but once I get the basics, I might be able to figure it out myself.
View 14 Replies
View Related
Jan 6, 2014
I am trying to code a macro that will search through a selected range of cells for key letters, for instance this cell may contain any combination of B, C, Te, Tc, RH, or LH. I would preferably like to search with capitalization being a factor but it is not a deal breaker. Below is a sample of what i have if the cell has a B, C it works for B but ignores the C i need it t o recognize both.
Code:
If InStr(1, ActiveCell.Text, "B") Then Range("O" + CStr(ActiveCell.Row)).Select
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.color = 65535
.TintAndShade = 0
.PatternTintAndShade = 0
[Code] ........
View 9 Replies
View Related
Jan 30, 2014
Any method to determine the number of instances a value ("4" for example) appears next to a specific value ("x" for example). I don't have a workbook; I'm just looking for any formula that can search for specific values and find the total number of instances that an adjoining cell contains data.
View 14 Replies
View Related
Jun 12, 2014
My Excel program (Excel 2010) currently has several columns and each column looks for and pulls data from a specific file on my computer. Then I need to delete any duplicate data entries, count the number of unique entries and track the changes through a chart. I have everything done except I cannot figure out (or find on the internet) a way to search in multiple columns (more than 2) and delete just the duplicate cells. I want to delete the cells in a way where there is one left. For example if the code 12gf is duplicated three time, I want to be left with one 12gf (it doesnt matter what column the original one is left in). Additionally, column length changes and they are not sorted. I have attempted to attach an image of an example file below.
View 14 Replies
View Related
Nov 12, 2009
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
View 9 Replies
View Related
Jul 5, 2007
How do I count the number of cells in a range that has text, even though all cells has a link....
View 9 Replies
View Related
Mar 5, 2007
I currently have a spreadsheet that i am using to track invoice pages when I receive them. I have added a conditional format on the worksheet that turns the Date red when each invoice is due and i manually shade each cell grey when the invoice is received, however as i have many invoices due on the spreadsheet its a bit dificult to track all of them... i have been told that a VB code will help. (I am new to this)...
I want to put a Command button on the spreadsheet that will take me to the next cell that has the text highlighted as red and the background color is white i.e not shaded.
View 9 Replies
View Related
Jul 18, 2007
I am trying to write some code to run through a workbook and identify dead ends i.e. cells with no dependents. I can isolate the cells I need to check and tried to count dependent cells to see which had none. My code to do this is:
If Cell.Dependents.Count < 1 Then
This creates "runtime error 1004: no cells found" when a cell with no dependents is found. I have tried using ISERROR and ISNUMBER and a few other things to either trap this error or turn it into something useful. It seems that whatever is returned from my expression is not an error code or a null or a number.
View 3 Replies
View Related
Nov 17, 2008
just need a hand tweaking the syntax on a names range.
Range 1
=INDEX(Sheet2!$C:$C,5):INDEX(Sheet2!$C:$C,ROW(LRow)-1)
LRow: Is a named active row for the last row. [say row 10]
This named range only selects ONE Column
How can I get it to select TWO columns [ie C & D] as in the example below does. It does it by the last number 2, goes two columns wide?
Range 2
=OFFSET(Sheet2!$C$5,0,0,COUNTA(Sheet2!$C:$C),2)
I can't figure out how to express that in the Range 1?
View 9 Replies
View Related
Sep 10, 2008
I have 26 ranges defined on my worksheet sheet3. Each range is 10 rows high and 4 columns wide. On my sheet1, I'd like to be able to go automatically to a specific range on sheet3 (I need to provide the choice to go to any of the 26 ranges), selected perhaps by a combobox. The ranges are building occupancy groups like A1, A2, B, E, R1, R2, etc. (26 of them). Then I'd like the user to look at each row in that particular range, select one, and then have the four values in that row placed in corresponding cells on sheet1.
I have this set up now using a four column combobox, and it works just like I want, except that only the first column of data is displayed after a row is selected. If I could get those four cells of data as they appear in the combobox inserted on sheet1, I'd be fine. But I can't. So I'm looking for a work-around. Basically, my goal is to get a specific row of data (4 cells wide) from my named ranges copied into cells on sheet1. But I need to be able to get to the correct range automatically.
View 9 Replies
View Related
Nov 17, 2009
I have attached two files, one the sample txt file imported to excel but the top area is highlighed with some notes and section break. RED deleted don't need amd un highlighted is actual data. The other file is what I would like to see the data look like after parse.
View 5 Replies
View Related
Dec 26, 2013
I have a spreadsheet where a date is entered in column A with data in B-F. I am trying to write code to look in column A for a specific date and enter additional data into columns G-L on the same row. It needs to be able to skip the rows that are blank. So I have the dates of 12/1, 12/2 and 12/3 in column A rows 1,2 and 3 and I want to enter data for 12/2 on row 2 skipping the blank cells in row 1 for 12/1. Here is the code I have below.
VB:
Private Sub CBSecure_Click()
Dim my_name As String
Dim r As Variant
Dim l As Long
sFind = DockDoorCal.Value
If Trim(sFind) = "" Then Exit Sub
[Code]....
View 4 Replies
View Related
May 23, 2006
I am having trouble getting my IF statement to test if the cell contains the text "sale" return "X" if not "Y". I need it to search through the text string in that cell and find a certain word, and if it finds that word, retrn a value. I am really having difficulty with is what symbol or function do I use for the logical test? (i.e. =, <>, MATCH, INDEX?)
View 4 Replies
View Related
Aug 21, 2009
I' having trouble using the =IF(ISNUMBER(SEARCH formula to search multiple cells.
I can get it to work to search one cell (as below):
=IF(ISNUMBER(SEARCH("Same",G10)),"No Change",'Aug 09 Matrix'!F10)
(In this case the respone is No Change as Cell G10 contains "Same")
However cannot get it to work for several cells. I have pasted below and highlighted the function I would like it to perform:
=IF(ISNUMBER(SEARCH("Same",G10:R10)),"No Change",'Aug 09 Matrix'!F10)
Essentially the other cells in that row (G10:R10) all contain "Same", however for some reason it is identifying this as FALSE and putting in the data from the 'Aug 09 Matrix' sheet.
View 9 Replies
View Related
Oct 9, 2006
I'm using the below VBA
Dim c, DataRow
With Data
Set c = . Range("A5:A350"). Find(KPI, LookIn:=xlValues)
If Not c Is Nothing Then
DataRow = c.Row
End If
End With
Now,If KPI is for example = "Favourite Hotel" and if i have data that looks like :
Favourite Hotel - London
Favourite Hotel - Cardiff
Favourite Hotel
Favourite Hotel - Birmingham
Then it seems to not look be looking for an exact match (e.g. Favourite Hotel) and rather is finding the first item in the list that contains the KPI string (E.g. Favourite Hotel - London).
How do i make it search for an exact match?
View 4 Replies
View Related
Mar 6, 2014
Create a search engine in vba for a worksheet, a macro to be assigned to a button. The 'search engine' to that 'Find button' that I have in mind is on these parameters:
- search any result, complete or partial, non-case sensitive;
- the text to search is typed in B2;
- after the text to search is typed, it only works by pressing that 'Find button';
- it only searches column D in the current worksheet;
- tells the total number of matches found in C2;
- when that Find button is clicked, it goes automatically to the first result found and stops;
- if that Find button is clicked again then it goes to the next found match and stops, and so on;
- when it reaches the end of the document, it just restarts to search from the beginning;
- if there are no matches, it just makes a sound and does nothing; and types zero (0) in C2.
View 11 Replies
View Related
Jul 2, 2009
How can I reduce the code to perform this task ?
View 3 Replies
View Related
Apr 12, 2007
way to code in Excel 2000 a macro that would on "workbook open" search for a specific macro and if its there run it?
View 9 Replies
View Related
Jan 3, 2014
I have attached the excel files which contains the type of format I use.
I need to calculate the received when..
search by client name using "*"&Cell reference&"*" then match the expiration date then transaction type. if all conditions are true, then calculate the difference between i.e. Subtract expiration date - recieived date..
View 4 Replies
View Related
Jan 19, 2010
At attachment when we enter value to f11 and h11 together, certificate number must be come up in cell of f13
View 14 Replies
View Related
Jan 10, 2008
i have is that at current i have a load of data (6000 cells worth)
What i need to do is to go through the data and highlight anywhere where it may have the word "in/outsourcing" (The data is based in cell AA which is just a description of text)
Other than doing Ctrl F through each cell is there a faster way in which excel can search through the cells and even highlighting the cell where the word occurs.
I thought if the word "sourc" is searched this would then pick up both
View 9 Replies
View Related
Mar 20, 2009
i made another thread about this but this one is more detailed.
all my questions are in the attachment excel thing, on the main page.
View 9 Replies
View Related
Jul 17, 2009
when the information cannot be found, it breaks the code and did not continue the search.
View 6 Replies
View Related
