Macro Code To Trace Dependents/Precedents
Jun 17, 2008
I would like to trace dependents of all cells <> "" in column A of a sheet "Tickmarks". If there is a cell in column A which has a value, but does not have a dependent I would like that value to be stored. When the trace dependents check is done for all the cells with values in column A, I would like to display a msgbox with all the cell values collected above.
Eventually, I will be trying to locate the cells with no dependents but with values in Column A and replace them with cells with dependents and change the dependent links to the updated cells.
I have attached an example.
Sub Trace_Dependents_Tickmark_Sheet()
Dim RowCounter As Integer
RowCounter = 3
'Select firsct cell with t/m & show dependents
Range("A" & RowCounter).ShowDependents
' Loop until RowCounter = 200
Do
If Range("A" & RowCounter).Value = 0 Then
RowCounter = RowCounter + 1
View 7 Replies
ADVERTISEMENT
Aug 17, 2007
When tracing precedents (or dependents) and the worksheet icon is pointed to, I understand that it is referring to another worksheet. Is there a way to discover which worksheet and/or cell?
View 3 Replies
View Related
Jan 25, 2014
I am baffled because one worksheet I can cut/paste and none of the reference cells whether they are dependents or precedents change--in other words, all formulas remain exactly the same. I switch over to another tab in my back-end and the formulas change when cutting/pasting cells.
View 1 Replies
View Related
Feb 17, 2009
I am working on a tool to highlight cells that have dependents but no precedents. This would be useful for me as I build a number of models and handle models built by others.
I want to be able to easily see where model inputs are and inputs will always be cells that do not have precedents and do have at least one dependent.
I have played with a number of methods with very little success. Is there an easy way to test whether or not a cell has a precedent or dependent within the workbook?
for cell in range
if cell.does.not.have.precedent and cell.has.dependent then
cell.Interior.ColorIndex = 35
end iff
next cell
I found this in an older post but I cant get it to work at all.
Sub atest()
Dim rngA As Range
Dim sngA As Single
For Each rngA In Selection.Cells
If Len(rngA.Formula) > 0 Then
On Error Resume Next
sngA = rngA.DirectDependents.Count
If sngA = 0 Then
rngA.Style = "NoDeps"
End If
End If
Next
End Sub
View 9 Replies
View Related
May 30, 2008
I'm an experienced Excel user working with very large Excel files that contain many sheets with thousands of formulas referencing various cells on different worksheets. I've been searching for an advanced solution for Excel and I am actually having doubts as to whether it actually exists on the market. (If it doesn't take this idea for free!)
I need a program that could generate a visual map that displays different cells and the links among them. For example, such maps are used in social networking to show connections among people - an example here.
In the end I would have a similar map and it would show me which worksheets are more or less isolated (i.e. don't reference directly any other cells).
View 2 Replies
View Related
Jul 13, 2009
I have a two worksheets of workbook named LC worksheet and second one Account work sheet.
Data from LC worksheet likned into the Account worksheet at Column K and Column V.
I want to highlight cells in LC worksheet which have no dependents or have duplicate dependents at Column K and Column V into the Account worksheet. Built in trace dependents is time consuming and useless.
File attached for your further understanding
View 11 Replies
View Related
Aug 20, 2013
I have a challenge I haven't quite been able to figure out:
I need a 6 digit trace code to be automatically generated for each job based on the date, the product type and the job number.
The first 2 digits on the trace-code are alphanumeric and the sequence for each job is AA, AB, AC etc.
The last 4 digits are a date code (YYWW.... two digits for the year and two digits for the week number).
The criteria is that multiple jobs of the same product type within the same work week must not have identical trace codes. So Job 1 gets "AA" plus the date code... Job 2 gets "AB" plus the date code, etc. If Job 3 is done in the next work week, it cycles back to "AA" and gets the new date-code.
Generating the date-code was simple enough, but coming up with a function or rule to assign the two-digit alpha has been a challenge that I have not been able to beat.
Below is an example of how the Trace-code column should work....note that Trace code on one product type might be identical to the trace code on another product type.
A
B
C
D
1
Date
Product type
Lot number
Trace code
[Code] .........
View 3 Replies
View Related
Jul 18, 2007
I am trying to write some code to run through a workbook and identify dead ends i.e. cells with no dependents. I can isolate the cells I need to check and tried to count dependent cells to see which had none. My code to do this is:
If Cell.Dependents.Count < 1 Then
This creates "runtime error 1004: no cells found" when a cell with no dependents is found. I have tried using ISERROR and ISNUMBER and a few other things to either trap this error or turn it into something useful. It seems that whatever is returned from my expression is not an error code or a null or a number.
View 3 Replies
View Related
May 31, 2012
Excel 2010ABCDEFGH1EMPLeaderSamAsbertNoellaJackson2RosalineSam3LionelAsbert4KerryNoella5JohnnyNoella
6AliAsbert7RosalineSam8TimothyAsbert9TimothySam10ReginaldAsbert11PascualJackson12MichaelSam13ReginaldJackson
14MeganJackson15ShellySam16CandiceSam171819Sheet1
Here's my problem... Column A contains employee name & column B contains Team Leader name of the respective employee. Range D1:G1 should contain names of team leaders from column B. After that, depending on the name populated in D1, cells going downwards from cell D2 should contain name of employees of that team leader. Similar thing should be repeated for columns E, F, & G. If an employee shows up under two team leaders then it should be displayed under both lists.
Is there any formula/VBA code which can do this? Been after this for last 3-4 hours and now just lost in a maze of various Index Match combinations and array formulas..
View 9 Replies
View Related
Jul 24, 2014
I need to write an excel macro to trace the valid PO# in my daily report.
Below is the condition:
If the PO# is an empty cell, the result return at column B as Not Valid
If the PO# starts with any character (example: FISHNH123), the result return at column B as Not Valid
If PO# is not starts with 3000 or 490 or 450(example: 3000823041,3000823037), the result return at column B as Not Valid
PO#
Status
empty cell
Not Valid
PO# starts with any character (example: FISHNH123)
Not Valid
PO# is not start with 3000 or 490 or 450
Not Valid
I'm using excel 2010..
View 2 Replies
View Related
Dec 8, 2009
I have a worksheet where I've deleted data in cells and rows. I am left with alternating rows of data and blank rows however a macro that I've been running to delete blank rows does not work on some of the rows.
To delete the data I used the Find and Replace feature and it seems that afterward the cells where this data was is now somehow marked as not completely empty. It appears empty but if I use the Control-Right Arrow combination from Column A, it skips over some cells but stops on a cell that used to contain data. If I press the Delete key it clears the cell completely and if I do that on all the cells the Ctrl-Right Arrow stops on until the end of the row, the macro works on that row...but not the next row of seemingly empty cells.
It's not spaces and there's no apostrophes and the cells are all formatted as General (Number Style) and Normal (Styles). I've even copied the format of a row of all deleted cells but that still does not completely clean out the "empty" cells. I've also run the Inspect Document command to remove what may be there but same results.
Is there something I can do to locate and remove this mysterious data?
View 7 Replies
View Related
Feb 12, 2014
I have a document with a huge number of chained-together precedent cells, each changing vastly when a single input cell's value is changed (my x-value).
I need to look at the bottom line (my y-value) which is the result of a number of calculations based on the aforementioned cells, there is no linear relationship as there are a number of thresholds and roundups.
I have done this in mat-lab, however my company doesn't have that luxury and all the information is created by a standard estimating sheet that cannot change format.
How could I go about doing this? I've had a look through pettier however I can't see anything that doesn't either require a named cell with a huge formula in it or a table (which isn't practical in this instance - I need to chart the bottom line for 100 different values).
View 1 Replies
View Related
Mar 13, 2008
I'm disecting someone's spreadsheet to automate it.
I'm looking for some code that will make a list or table of cells with dependents (not on the active sheet) and show what the dependent is. I'm assuming the code would list all values or formulas on the active sheet that get used somewhere 'NOT' on the active sheet.
My results would be basically 2 columns. Column 1 would be a list of tab name & cell refrences from the active sheet when the macro was run and column 2 would be the tab name & cell reference of where the data goes within this book.
View 3 Replies
View Related
Nov 17, 2007
I need to select in a sheet the cells which have name reference to see if the whole sheet is dependent , i have tried to trace the dependents and precedents but that didnt work,
View 5 Replies
View Related
Dec 17, 2008
I have a macro that, when run, needs to read the contents of cell B5, and run the code that it contains.
Cell B5, for example, would contain the text:
Range("B13").Formula = "SUM(D12:D14)"
I need a macro to "execute this code", as if it were in the macro itself.
I have assigned the above to a variable, but am not sure how to execute it.
EG.
Dim the_calc
the_calc = Range("B5").value
Now, how do I run the_calc ?
View 9 Replies
View Related
Sep 9, 2007
What is the most efficient VBA code for the following macro recorded codes? I wish to write more efficient code versus the lengthy, cumbersome macro recorder code.
1) Macro Recorder Code to Copy One Sheet to Another
Sheets("Data Apple").Select
Cells.Select
Selection.Copy
Sheets("Banana").Select
Cells.Select
ActiveSheet.Paste
2) Macro Recorder Code for Replacement Purposes......................
View 9 Replies
View Related
Feb 22, 2008
I'm trying to add buttons to an excel spreadsheet at runtime. Each row in the spreadsheet should have its own buttons. I was able to create and edit them with the ActiveSheet. OLEObjects.Add() function, but after that, when i was trying to create code dynamically to react on the buttons' click events excel crashes (actually it works for one button, but not if my routine for adding a new button and event code is called more than once in a row!)
The code below works if the AddCmdbuttonWithCode() is called once, but crashes if it is called two or more times. Excel tries to restore the document after the crash and the first button and its corresponding click event code is visible and works... but NOT the second button and its event code...
The only way I can create multiple buttons right now is by calling my method once per click, opening the vba editor, changing the parameters for my AddCmdbuttonWithCode() routine and execute it again. After that I have mutliple buttons in different lines which all work fine (so the concept seems to work).
The problem seems to be the insertLine method, since everything seems to work if i leave it out (except for the code generation of course, since this is done by this part of the code :-) ). Is it possible that calling the insertLine Method can't be called multiple times? I don't know... any ideas? Feel free to test my code - it's small, easy to understand and has comments.
'this code calls the method which creates the buttons in specific cells with specific names
Private Sub CommandButton3_Click()
'the first call always works!
AddCmdbuttonWithCode "Edit_111_111_114", 23
'the second one crashes excel
AddCmdbuttonWithCode "Edit_111_111_115", 27
End Sub
View 3 Replies
View Related
Jul 10, 2012
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code:
Sub RSLDASHBOARDV2()
'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code:
objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code:
Sub STATSPIVOT()
'STATS PAGE BASED ON STATS DATA TAB
Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select
Range("A1").Select
[code]...
View 4 Replies
View Related
Jul 21, 2007
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Windows("estimate sheet one.xls").Activate
View 2 Replies
View Related
Aug 10, 2014
Refer to attached file.
I have below code which successfully create a macro button and assign the macro correctly.
This is only doing for one sheet and i need to modify the code so that it does for all sheets of the workbook.
[Code] ....
Test Macro_Botton.xlsm
View 3 Replies
View Related
Feb 7, 2008
I have recently grabbed the very helpful "Macro to delete VBA code" from this site, and it's working but with one small problem.
My worksheet runs a lot of code, then deletes all macro code and saves itself.
The problem is the next time i open I still get the macro security warning!
I've checked thoroughly and there is definatley no vba left anywhere.
If I open the document, enable macros, and save it, then open it again, I no longer get the warning.
View 9 Replies
View Related
Sep 11, 2006
I written VBA code to create a new sheet and embed a command button on it. I want to assign a macro to this button but when I click on the button the assign macro button is greyed out. I have plenty of macros saved and the VBA code has finished running so why should this be?
View 7 Replies
View Related
Jan 27, 2009
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies
View Related
Feb 8, 2007
I've developed a little software using Excel Macros & VB. To prevent people from accesing the code I protected the code blocking it from visualization. It seems not enough as an acquaintance of a friend cracked it in 25 minutes. Or so he says. So I'd like to know if there is a better way to protect the font code.
View 8 Replies
View Related
Aug 9, 2013
How to run the macro recorder and have even had a few minor successes with VBA.
I know it's a simple "if-then" code but I can't figure out how to write code that will run a particular macro if a cell contains a certain value.
For example, if the value in cell A1 is "1", then I would like a Macro I've called "Macro1" to run. If the value is "2", run "Macro2", etc.
View 2 Replies
View Related
Feb 3, 2009
I have a sort function in one of my macro. Sometimes it works, sometimes it does not. I can't figure out why. I am trying to sort columns A-F and each column has a header.
View 2 Replies
View Related
Mar 28, 2009
I've added the following code into macro i have assigned to the button on this attached worksheet which deletes any row where the cell in the A column is blank.
View 6 Replies
View Related
May 16, 2009
The following code attempt is in a userform with one print button, one cancel button and six checkboxes refering to which sheets that are needed to print.
View 2 Replies
View Related
Jul 22, 2011
I record macro and hit select all and that action won't record. what's the macro code for select all in excel. i assumed it was the same as word
selection.wholestory
but it's not
View 7 Replies
View Related
Mar 5, 2012
Is it possible to insert for example Private sub Workbook_open() into This workbook by executing macro?
View 8 Replies
View Related
