I am baffled because one worksheet I can cut/paste and none of the reference cells whether they are dependents or precedents change--in other words, all formulas remain exactly the same. I switch over to another tab in my back-end and the formulas change when cutting/pasting cells.
View 1 Replies
I am working on a tool to highlight cells that have dependents but no precedents. This would be useful for me as I build a number of models and handle models built by others.
I want to be able to easily see where model inputs are and inputs will always be cells that do not have precedents and do have at least one dependent.
I have played with a number of methods with very little success. Is there an easy way to test whether or not a cell has a precedent or dependent within the workbook?
for cell in range
if cell.does.not.have.precedent and cell.has.dependent then
cell.Interior.ColorIndex = 35
end iff
next cell
I found this in an older post but I cant get it to work at all.
Sub atest()
Dim rngA As Range
Dim sngA As Single
For Each rngA In Selection.Cells
If Len(rngA.Formula) > 0 Then
On Error Resume Next
sngA = rngA.DirectDependents.Count
If sngA = 0 Then
rngA.Style = "NoDeps"
End If
End If
Next
End Sub
I'm an experienced Excel user working with very large Excel files that contain many sheets with thousands of formulas referencing various cells on different worksheets. I've been searching for an advanced solution for Excel and I am actually having doubts as to whether it actually exists on the market. (If it doesn't take this idea for free!)
I need a program that could generate a visual map that displays different cells and the links among them. For example, such maps are used in social networking to show connections among people - an example here.
In the end I would have a similar map and it would show me which worksheets are more or less isolated (i.e. don't reference directly any other cells).
I would like to trace dependents of all cells <> "" in column A of a sheet "Tickmarks". If there is a cell in column A which has a value, but does not have a dependent I would like that value to be stored. When the trace dependents check is done for all the cells with values in column A, I would like to display a msgbox with all the cell values collected above.
Eventually, I will be trying to locate the cells with no dependents but with values in Column A and replace them with cells with dependents and change the dependent links to the updated cells.
I have attached an example.
Sub Trace_Dependents_Tickmark_Sheet()
Dim RowCounter As Integer
RowCounter = 3
'Select firsct cell with t/m & show dependents
Range("A" & RowCounter).ShowDependents
' Loop until RowCounter = 200
Do
If Range("A" & RowCounter).Value = 0 Then
RowCounter = RowCounter + 1
I am trying to develop a macro in excel that CUTS AND PASTES rows of data from one worksheet in to the next available row in a new worksheet if there is a date in a particular cell. If the cells that are being checked for a date are empty, then the routine would skip these rows of data.
Here is an example of the worksheet. All rows containing a date in the Scanned column, would be cut and pasted in to a new worksheet. And any rows that have an empty cell in the Scanned column are ignored. If the Scanned column is filled at a later date, then when the macro is run, the data in that row would be cut and pasted in to the next available row in the new worksheet.
TasksNameIDRespPhaseDueScannedImportedSamLLLLO119/04/201003/04/2010KM12/02/2010BMJoe123DH1JOD12/02/2010BMAnn456WS117/03/201003/03/2010JOD12/02/2010BMJohn789DH401/03/201015/02/2010JOD12/02/2010BM
I have a document with a huge number of chained-together precedent cells, each changing vastly when a single input cell's value is changed (my x-value).
I need to look at the bottom line (my y-value) which is the result of a number of calculations based on the aforementioned cells, there is no linear relationship as there are a number of thresholds and roundups.
I have done this in mat-lab, however my company doesn't have that luxury and all the information is created by a standard estimating sheet that cannot change format.
How could I go about doing this? I've had a look through pettier however I can't see anything that doesn't either require a named cell with a huge formula in it or a table (which isn't practical in this instance - I need to chart the bottom line for 100 different values).
I've set up a spreadsheet structure at work which is three workbooks linked together.
I created this initially within My documents saved locally to my machine. Now though, I need to move the folder containing these workbooks onto the server to be accessed by others. My problem is that when cutting and pasting the folder, the formulas within the three spreadsheets still refer to their original location within My Documents rather than following the folder to their new location.
AS you can see in the attached file, I have several collumns of data going form 2012 to 1992. I would like to know the quickest way to invert this so the data is presented 1992 to 2012.
View 5 Replies View RelatedI am trying to cut all rows with the date less than 2 days older than the current date. Cut and paste it into a new worksheet in same workbook and save it into a specific folder.
[Code] ....
I am getting an error on the line :
[Code] .....
Saying Object doesn't support this property or method.
In column A I have the age of a sale i have completed (compared against todays date) and from B - N of the same row i have the data that coresponds to the sale. As Column A changes daily by 1 i would like to only keep the rows whereby column A is between 1 - 10. For any that are above 10 I would like to cut and paste to a second sheet, strangely entitled "older than 10 days" !
as there are formulas after column N which calculates the data i would only like to cut columns B - N of the specific row.
I think I need to create a macro that first sorts column A so I have the oldest data at the top and then a loop to check if these are above 10, i then want to cut from B - N and paste into another sheet.
I have a two worksheets of workbook named LC worksheet and second one Account work sheet.
Data from LC worksheet likned into the Account worksheet at Column K and Column V.
I want to highlight cells in LC worksheet which have no dependents or have duplicate dependents at Column K and Column V into the Account worksheet. Built in trace dependents is time consuming and useless.
File attached for your further understanding
code to take jobs that are done on one spreadsheet and send them to the next available row of a specified range on another worksheet. I am also looking to incorporate a way to delete the empty rows that are left behind.
I have already made code to select the completed jobs, but am still unsure how to approach the next part. I can't even paste the selected range to another sheet without errors from range sizes.
The following code is done up to the point where I cut my selection.
Sub Update()
Worksheets("OpenGen").Activate
Dim c As Object
Dim rngA As Range
[Code]....
I'm trying to copy and paste this formula to multiple cells and am having difficulty doing so without everything in the formula changing.. SUMIF(Bankroll!Q14:Q6000,U143,Bankroll!Y14:Y6000)
I only want the U143 to change to U144, U145, etc. Yet when I copy and paste down the sheet it changes the Q14:Q6000 and the Y14:Y6000 values as well. I've been having to go through and paste the formula one line at a time and then manually change the U143 to the current U cell that I want it to represent in order to keep the rest of the values the same. Is there a faster way than this?
How to copy and paste conditional formatting with our changing the cell values. My first row of data starts in row 4 and here is what I have in D4
If D4 is less than or equal to AA4, AW4, BS4, CO4 then it will highlight D4
Now I want to copy that format and paste it for all rows in column D. The problem I'm having though is when I paste the formula it doesn't change to match the row I'm on. For example, when I paste it in D5 this is what I get
If D5 is less than or equal to AA4, AW4, BS4, CO4 then it will highlight D5
How do I paste it so that it will update to show AA5, AW5, BS5, and CO5. I want to be able to do this for 500 rows.
When tracing precedents (or dependents) and the worksheet icon is pointed to, I understand that it is referring to another worksheet. Is there a way to discover which worksheet and/or cell?
View 3 Replies View RelatedI am trying to write some code to run through a workbook and identify dead ends i.e. cells with no dependents. I can isolate the cells I need to check and tried to count dependent cells to see which had none. My code to do this is:
If Cell.Dependents.Count < 1 Then
This creates "runtime error 1004: no cells found" when a cell with no dependents is found. I have tried using ISERROR and ISNUMBER and a few other things to either trap this error or turn it into something useful. It seems that whatever is returned from my expression is not an error code or a null or a number.
I'm disecting someone's spreadsheet to automate it.
I'm looking for some code that will make a list or table of cells with dependents (not on the active sheet) and show what the dependent is. I'm assuming the code would list all values or formulas on the active sheet that get used somewhere 'NOT' on the active sheet.
My results would be basically 2 columns. Column 1 would be a list of tab name & cell refrences from the active sheet when the macro was run and column 2 would be the tab name & cell reference of where the data goes within this book.
I need to select in a sheet the cells which have name reference to see if the whole sheet is dependent , i have tried to trace the dependents and precedents but that didnt work,
View 5 Replies View RelatedExcel 2010ABCDEFGH1EMPLeaderSamAsbertNoellaJackson2RosalineSam3LionelAsbert4KerryNoella5JohnnyNoella
6AliAsbert7RosalineSam8TimothyAsbert9TimothySam10ReginaldAsbert11PascualJackson12MichaelSam13ReginaldJackson
14MeganJackson15ShellySam16CandiceSam171819Sheet1
Here's my problem... Column A contains employee name & column B contains Team Leader name of the respective employee. Range D1:G1 should contain names of team leaders from column B. After that, depending on the name populated in D1, cells going downwards from cell D2 should contain name of employees of that team leader. Similar thing should be repeated for columns E, F, & G. If an employee shows up under two team leaders then it should be displayed under both lists.
Is there any formula/VBA code which can do this? Been after this for last 3-4 hours and now just lost in a maze of various Index Match combinations and array formulas..
I have some files on disk where I need to copy a part of the file name to make a search in our database. The files are PDF. They can have a long name of short. The only thing that does not change is the last part.
The last part ends like this:
1234_vw golf_Es_1234567_20140321.pdf
I'm interested in the part in red to be taken out and put in a cell to the right of the file name.
I used the below code that I found googling. Now I just to cut the part out in red to be able use it in my search in a easier way.
[Code] .....
I have seen a worksheet/workbook in the past that only contains (for example) Columns A:H and Rows 1:150. The rest of the columns and rows do not show. Unfortunately I cannot find the example I was looking at and I cannot find any information on how to achieve it.
View 3 Replies View RelatedI have some values in column A which looks like those in table which is shown down bellow. I have somewhere in the middle of that column one empty cell. Of course i have empty cells after the last value. I want formulas or macro or anything which will cut that column in that empty cell and all cells bellow the empty one put in column B from A1, and all cells above the empty one put in column C from A1. I tried everything but i have problem because i dont know how to eliminate empty cells bellow the last cell with value.
ABC
117
228
339
44
55
7
8
9
I have info displayed like this in cell c3
Bat 6Fm C6Hc 1K
Asc 8Gd C13yG1 198K
Chs 10GS C13yG3 34K
What I want is in cell J3 to return the first 3 letters and the numbers next to them three letters so in the example above it would return
Bat 6
Asc 8
Chs 10
I've inherited this monster of a spreadsheet that is consistently being added to and updated. Everyweek a new column is added and data entered. When one row is done, it gets cut and pasted to the Inactive sheet; however, the problem I am encountering if that the rows all have different amounts of columns, depending on when they were added and how long the items were on the sheet.
For example:
A
B
C
D
E
F
G
H
I
[code]....
So when I go to move row 1, when it becomes inactive, to the Inactive sheet, I have 8 columns of data that I need to cut and paste to make it line up with that sheet, which goes monthly. Is there any way to automatically cut out the empty columns of data for each row so that it can be condensed, rather then going through each one?
I would like to do a find in a column for “yes,” and if it is True I want it to cut the row where it was found as well as the one above it to Sheet2. I need it to loop through the sheet appending to the ones that were found previously in Sheet2.
View 9 Replies View RelatedI'm pulling data from my servers (alarms) and have roughly 10 alarm points, reporting 9000 alarms. I've been able to pull them off the server on an excel file, have been able to sort them, but would like to venture into the hope that there is some sort of formula that would take the duplicate alarms(cell a1-a9000), delete them, and report how many duplicates were removed from the list in cell b1-b10
xyz
xyz
xyz
xyz
123
123
zzz
---
somehow it could be turned into
"xyz 4"
"123 2"
"zzz 1"
I have to look through an entire table and find certain criteria (eg. "STEVE'S PIZZA SHOP"). It might be in columns G or H, or it could also be in Columns C or something of that nature. What I'd like to do is search through the table, find each instance of said criteria and cut each row the criteria apperas in to a different sheet. I'd like to do this as a macro, so I can set it up for other criteria as well. In addition, if I can include in the macro a way to create a header row (which I'm pretty confident I can myself), as well as change the title of the sheet the information is moved to. I have looked up Do-While loops, For-Next loops, If-Then loops. I am at a total loss.
View 9 Replies View RelatedWhenever you insert / delete row or cut cells out in Mon/Tue sheets it's causing issues in the table in the Weekly view tab.
Is there any way to prevent it? I don't mind redoing whole spreadsheet, it was done ages ago in a very fast manner.
I gave you an idea by deleting a row range in Mon tab which causes #REF error.
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies View RelatedI am trying to auto-populate text in cells in area A, based on data I enter into other cells in area B. I want the area A cells to be for display only, as all editing will be done in area B. The problem is: how do I do this such that the text I write does not get cut off if is longer than the column width? See the attached document for a clear example and description of what I am trying to do...
Excel Q.xlsx‎
