Code To Position Toolbar
Jun 5, 2008
using excel 2003.
I have the following code to display a toolbar everytime my template is open
'Show Custom Toolbar "Trade Log" on Workbook Open
On Error Resume Next
With Application.CommandBars("Trade Log")
.Position = msoBarFloating
.Left = 5000
.Top = 600
.Visible = True
End With
End Sub
(hope i wrapped the code quotes correctly this time ))))
I noticed that when you drag a custom toolbar to the far right of your screen - it locks in to a vertical toolbar space.
How can i position my toolbar in this place automatically by modifying the above code.
View 9 Replies
ADVERTISEMENT
Dec 21, 2006
I have added a toolbar to an excel application that the company uses. I need this toolbar only to be accessed to this application and not any time that you open excel. I have used the following
Private Sub Workbook_Open()
Application.CommandBars("Rithin-Toolbar2006").Enabled = True
Application.CommandBars("Rithin-Toolbar2006").Visible = True
go_cover
End Sub
Private Sub Workbook_close()
Application.CommandBars("Rithin-Toolbar2006").Delete
Application.CommandBars("Rithin-Toolbar2006").Enabled = False
Application.CommandBars("Rithin-Toolbar2006").Visible = False
End Sub
This works but only If I accept yes when it prompts me to save changes to the workbook. Each time I open the workbook and close it, it prompts me to save changes to the workbook. I dont want to force a save on the workbook, meaning have code that will save the workbook before closing. I want it such that if the user opens the workbook, and makes no changes, he/she should just close it with no questions asked.
View 6 Replies
View Related
Jan 22, 2009
I have code which creates a tool bar which works Ok, however I can't get the statement correct to assign code to it.
View 8 Replies
View Related
Oct 19, 2006
which of these toolbars provides the better 'controls' to paste onto worksheets (as opposed to UserForms)? For those wondering, both toolbars contain some apparently similar controls, e.g., combo box, radio button, spinner etc. but there are differences in their behaviour it would seem...
View 2 Replies
View Related
May 29, 2012
I'm using a bit of code (below) which is not amazing but which does seem to work, the idea being that entering a number then the active cell relating to that number will be highlighted and the sheeet position will "goto" it to move it into view on the screen. I have adapted this from something in one of my old Workbooks, and I admit it's probably a bit messy!
The problem is, it doesn't seem to always put the returned active cell in the same place, sometimes it's nicely central to the screen, but at others it's right at the top. As the numbers corrrespond to the top line of each little area of 30 rows, I'd like it to to come about 10-12 rows down. I can't seem to get this to work!
Code:
Sub FindSection()
Dim nm As Integer, txtnum As String, Found As Range
txtnum = Application.InputBox(prompt:="Enter a Number")
Set myRange = Worksheets("T&M SHEET").Range("K:K")
[Code]....
View 5 Replies
View Related
Aug 25, 2008
How can I create a commandbutton with code & position it.
View 4 Replies
View Related
Mar 11, 2008
This seems really basic, but I can't seem to find it...
Using Visual Basic, if I have a named range, lets say like "NAMEDRANGE", how can I refer to cells in that range by their position in the range? For example, if I want to refer to the cell in the 2nd row and 3rd column of the range.
Also is their an easy way to refer to the first(top-left) cell in a named range?
View 3 Replies
View Related
Jan 7, 2009
Is it possible to position a predetermined cell (e.g. A42) in the top left corner of the screen. (Not every screen users use has the same size)
View 3 Replies
View Related
Jun 24, 2009
I have this code below that deletes any single occurrence of a customer number but the "Customer Numbers" must be in column A.
I would like to change the code below to instead look for the "Customer Number" column by name, rather than by column A. My "Customer Number" column will always be in row 1, but yet, it will be in a different column letter every time I run the report.
View 2 Replies
View Related
May 22, 2007
I've recently got a new computer and this problem is driving me nuts.
When I click view!toolbars!drawing, nothing happens. No drawing toolbar appears at the bottom of the screen where it used to be. There's a small "drawing toolbar" icon on the main toolbar, but whether this is depressed or not makes no difference either.
I understand this may be changed in the 2007 version, but I’m using Excel 2000
View 10 Replies
View Related
Oct 12, 2009
There is something that is bothering me in excel. Every time I open a workbook, on my toolbar appears the "Reviewing" one. I tried to unchecked it from the customize toolbar option but still appears on opening a new workbook ((.
View 2 Replies
View Related
Nov 25, 2006
I downloaded the calculator toolbar, and for some reason it doesn't look right, it doesn't resemble a calculator layout at all.
The numbers are skewed, as though the layout is in landscape view instead of portrate. I've tried repeately to delete it from the toolbars menu option, with no success. It's become annoying.
View 9 Replies
View Related
Apr 20, 2007
I have a project management workbook I created that tracks the status of projects and their associated "grocery list" of items being pursued to complete each project. The user needs to indicate the status of each grocery item by setting the item red, yellow, green, or blue; each color has an associated number (1, 2, 3, 4) so the overall project status can be averaged. I am currently using a command button and Select Case statements to allow the user to toggle through the various status colors with a single button. The problem is, I still have to have a separate command button on each sheet which takes up a lot of space.
I would like to have a single toolbar that is available on all sheets, much like an Add In creating a menu, but it is impossible for me to personally install a custome toolbar or an Add In on each user's PC. I need something imbedded in the actual workbook that will propogate the toolbar on its own.
View 9 Replies
View Related
Feb 14, 2007
how i can create a replacement toolbar within excel, that will run once the file is opened. replacing the file, edit, etc.
View 3 Replies
View Related
Oct 5, 2012
I have a macro and I want a button on the toolbar, once clicked on the button, I want the macro to run.
Is there any way to do this. If this can be done using add-ins, I doesn't know how to create a button for the same.
View 4 Replies
View Related
Oct 2, 2008
I use Excel 2000.
I want to hide all toolbars when I work.
I know how to hide them during a session, but when I exit and reboot Excel, the "standard" toolbar always returns.
Is there some way to hide the "standard" toolbar permanently?
View 8 Replies
View Related
Aug 20, 2008
I am running Excel 2003 and in my workbook I created a macro and assigned it to a toolbar comman button, "Copy Filtered Data". This macro copies the visible data into a new workbook.
This works well but others in my company will also be accessing this workbook from a sharepoint and I discovered that when they open it this command button is not on their toolbar.
Would anyone know what I need to do to have this button load on the toolbar when the workbook opens?
Also, I would like this button to either unload or greyout when the workbook that this button is intended for is closed.
View 9 Replies
View Related
Feb 17, 2009
I have created a toolbar button to save a file as a specific name based on a cell value. The macro runs fine, but the button changes priority when the new file is saved.
i.e. the original file is called "quoting_tool" and the newly created file is called "quoting_tool_'B3'". However, the next time I click this button in the original file, it requests the new file as the home of the toolbar button. I have tried saving the original file after adding the button, but that doesn't work.
View 2 Replies
View Related
Mar 25, 2009
Is there a way to name a combo box from the form's toolbar? I know you can give a name a combo box from the activex control toolbar but I am puzzled with the attached spreadsheet. The code is referencing a name "Combo Box 2" and I am wondering how they assigned a name to a combo box from the forms toolbar. See attached file for more detail.
View 3 Replies
View Related
Jul 2, 2009
I coppied this code from: http://www.contextures.com/xlToolbar02.html. Modified it to show menus but how to add sub menus? (This is the only code I found that works on Excel 2000, so far).
View 4 Replies
View Related
Jul 10, 2009
Cross-Post
http://www.mrexcel.com/forum/showthr...=1#post1994747
I need a way in VBA to disable the Mini Toolbar from the right-click menu.
View 6 Replies
View Related
Apr 3, 2008
I've got the bare bones of a toolbox control on my userform but I can seem to find anyway to refer to the buttons and control them (I’ve tried using the properties page but it doesn't seem to give me the options I need). I want to be able to add a macro and a picture to the buttons, is this possible?
Eg.
With Userform1.Toolbar1.button("x")
.image/picture/faceid = “x”
.action = "macro1"
end with
I've looked for ages on the board but can only find threads on creating toolbars in the application, not on userforms.
View 9 Replies
View Related
Nov 5, 2008
I hate this toolbar.
I have no need for it but would like it to remain in the list of available toolbars (eg when i go View>Toolbars).
When i uncheck it from the list it disappears (hooray!) but the little b*stard is always back on my screen the next time I open Excel (this is in contrast to any other toolbars I hide/make visible which are always hidden/visible as expected - hence I don't think it's an .xlb problem).
has anyone got an explanation as to why and, better yet, a way to get the problem child off of my Excel (without removing it from the toolbar menu list)? Because I'm at work I can't modify Registry settings by the way.
View 9 Replies
View Related
Sep 15, 2009
I'm using forms toolbox to add textboxes on an user input sheet for my workbook.
There would be 3 textboxes included in the group box added to the user input sheet.
I'm struggling with the code to accomplish the following:
Textbox1 - is a % input. I would like the input to be formatted to 2 percentage points. In other words, if someone enters 2, it will show as 2.00% and I want the 2.00% to be recognized as such in the spreadsheet calculations. In other words, the input is used in the calculations in another sheet.
Code thus far (and I may be offbase on this):
Private Sub TextBox1_Change()
Sheets("Sheet2").Range("rate").Value = TextBox1.Value
End Sub
Problem - the cursor is not moving and the result of the input is not showing. I would like the cursor to move from textbox1 to textbox2 to textbox3 by tab or enter button.
Textbox2 - is decimal input. I would like the input 5, it will formatted to show as 5.0. This input is used in the calculations in another sheet.
Private Sub TextBox2_Change()
Sheets("Sheet2").Range("multiple").Value = TextBox1.Value
End Sub
Textbox3 - is a result box based on the inputs from textbox1 and textbox2. I would like the result to be shown to the user in this textbox3 and for it to be greyed out and not to accept any inputs from the user.
That is, it is not an input box but rather a results box.
View 9 Replies
View Related
Sep 16, 2005
Is there anyway to permanently removed the reviewing toolbar . Everytime i open a document, the reviewing toolbar will come out.. and i got to manually remove it again.
is there a way to remove it by default unltil i request it to be turn on.
View 9 Replies
View Related
Jun 11, 2006
I've created a custom toolbar via Excel's toolbar wizard, to which I have added several macro buttons. However, when clicked, instead of running the assigned macro, Excel instead attempts to open my already open file?? I think I read something about having to manually change the buttons to refer to a .xla ??? Not sure though.
View 3 Replies
View Related
Jul 28, 2006
I have created 2 toolbar buttons which were attached to a macro that ran the original 'EditTenancy'. I now want to change these to use anew macro 'EditExistingTenancy' but cannot see how to do it as when I right click now I only get a toolbar list.
Do I have to creat 2 new toolbar buttons?
How do I get rid of the non-functioning ones?
View 4 Replies
View Related
Sep 26, 2006
After running a macro, the range name toolbar/display box in Excel has disappeared. how to get it to display again?
View 6 Replies
View Related
Oct 12, 2006
In the bottom right corner of a worksheet there is a place that allows for sum, average etc... to be displayed for a selected goup of cells. Is there a way to make that show a cells value as changes are made to a worksheet?
EDIT: I guess I do not have to do it this way. I am trying to figure out how to keep a total on the screen at all times and I have freeze Panes already in use.
View 4 Replies
View Related
Dec 18, 2006
I have following code that places three buttons on UserForm toolbar:
tlbMain.Width = frmMain.Width
tlbMain.Buttons.Add Index:=1, Caption:="a1", Style:=tbrDefault
tlbMain.Buttons.Add Index:=2, Caption:="a2", Style:=tbrDefault
tlbMain.Buttons.Add Index:=3, Caption:="a3", Style:=tbrDefault
how to add the images for this buttons?
View 9 Replies
View Related