I'm using a bit of code (below) which is not amazing but which does seem to work, the idea being that entering a number then the active cell relating to that number will be highlighted and the sheeet position will "goto" it to move it into view on the screen. I have adapted this from something in one of my old Workbooks, and I admit it's probably a bit messy!
The problem is, it doesn't seem to always put the returned active cell in the same place, sometimes it's nicely central to the screen, but at others it's right at the top. As the numbers corrrespond to the top line of each little area of 30 rows, I'd like it to to come about 10-12 rows down. I can't seem to get this to work!
Code:
Sub FindSection()
Dim nm As Integer, txtnum As String, Found As Range
txtnum = Application.InputBox(prompt:="Enter a Number")
Set myRange = Worksheets("T&M SHEET").Range("K:K")
I would like to end a macro with a specific cell (e.g. E50) in the first cell in the upper left hand corner of the screen. How might I accomplish this?
I have a Msg Box in my code. It usually pops-up in the Center of the screen. When I enabled a second monetor, the Msg Box now pops-up at the right edge of my main screen.
Is there a way to control where this Box pops-up? Ths code looks like this:
response = MsgBox("Switch to Manual Mode?", vbYesNoCancel, "Manual Switch") If response = vbYes Then WriteValue 0, "5MFWMODE.f_cv"
I created a shape (rectangle). I assigned a macro to it, to activate another worksheet.
Can I fix the position of the shape on the screen, near the top. I have 700 rows in the worksheet and I want this rectangle always visible, near the top.
I have a very large workbook with multiple sheets and use macros to copy and paste all data as values, then delete some rows and columns depending on certain criteria. This starts at cell A1 and works right, then down.
This is then saved as a copy and distributed to a wide audience.
The problem is that when each page is opened up, the data shown is the bottom right of the whole sheet instead of the top left ( Panes are frozen for row and column headers).
I have an image overlapping a range of cells. I want this code to scan the pixel at the center of the cell, find out what color it is, and set the entire cell to that color, for each cell. Unfortunately with the GetPixel function I have to specify the x and y coordinates in terms of pixels from the top left corner of my monitor. The "CurrentCell.left & CurrentCell.top" method is not giving me the right location (Should start at cell AA1). If you would like, open up the file, go to sheet 2, insert an image, and click "Generate Field from Image". I set the cursor to follow the current position so you can see that it is selecting pixels from the corner of my monitor rather than cell AA1. Is there a way I can calculate the screen position of the top left of cell AA1?
I have the following code to display a toolbar everytime my template is open
'Show Custom Toolbar "Trade Log" on Workbook Open On Error Resume Next With Application.CommandBars("Trade Log") .Position = msoBarFloating .Left = 5000 .Top = 600 .Visible = True End With End Sub
(hope i wrapped the code quotes correctly this time ))))
I noticed that when you drag a custom toolbar to the far right of your screen - it locks in to a vertical toolbar space.
How can i position my toolbar in this place automatically by modifying the above code.
How can i get this code to run through each sheet and place the value of the sum on its respective sheet in the same positon .....
Sub maths() lr = Cells(Rows.Count, "E").End(xlUp).Row Range("E" & lr + 1).Select ActiveCell.Formula = Application.WorksheetFunction.Sum(Range("E2:E" & lr)) Selection.NumberFormat = "[h]:mm:ss" End Sub
i have an excel workbook containing approx 20 worksheets. What I would like to do is make the workbook go full screen when the user opens the file and allow the user to save as into the same file path the workbook is stored when closed
way i could stop my sheet from flickering everytime i change my cell selection via keyboard/mouse. i checked and this problem is only with code below that i run in view code of my sheet...
PHP Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim str As String Dim cboTemp As OLEObject Dim ws As Worksheet Set ws = ActiveSheet On Error GoTo errHandler
If Target.Count > 1 Then GoTo exitHandler If Target.Address(False, False) = "Z3" Then Call GoToMatch Exit Sub End If
Some time ago (not sure how long ago) I created a splash screen that comes up when I first load a particular workbook. There was only one worksheet in the workbook and at that time the data in the worksheet was not so relevant and hardly ever used. That workbook name is "Employees" and the worksheet name is "EmpData". Subsequently, the worksheet ("EmpData") in the workbook "Employees" has became relevant to a new workbook named "Payroll" I created. This workbook is used all the time. It had four different active worksheets.
I realized last week that the data in "EmpData" was very relevant to the work in the "Payroll" workbook so I copied "EmpData" worksheet in it's entirety to the "Payroll" workbook as a fifth worksheet using the same name as before, "EmpData". Now each time I open the "payroll" workbook the splash screen shows up and hangs around for several seconds or longer. It has become quite irritating and I want to delete it.
This seems really basic, but I can't seem to find it...
Using Visual Basic, if I have a named range, lets say like "NAMEDRANGE", how can I refer to cells in that range by their position in the range? For example, if I want to refer to the cell in the 2nd row and 3rd column of the range.
Also is their an easy way to refer to the first(top-left) cell in a named range?
I have a rather large workbook (30 sheets, 10MB) that has one worksheet with many INDIRECT functions in it (pulling data from the same file, different tabs). I am working to put simple code into the workbook to protect and/or unprotect all worksheets. I have gotten code to work to both protect and unprotect all the sheets, but when I run the unprotect code (see below), and then I go to edit the workbook, data from the sheet with many "indirect" functions temporarily "overwrites" the data on the active sheet (this is fixed when I scroll my mouse over the effected cells). I am developing this workbook for other users, so I'd like to fix this before sending it off to them.
This problem does not happen until after I run the following .....
it would be possible to have text disappear after being displayed in Excel for a while.
My son and I played around with games (helping create a photographic memory, I told the youngster!) on the thing and until yesterday neither of us noticed that clicking the mouse anywhere (actually just clicking it) causes the screen to "freeze" while the code still happily erases the text in the background.
Hitting ESC allows the screen to cath up to the actual code EVEN THOUGH the ESC key is actually disabled from breaking the code.
I've written code that involves adding a number of new sheets to a workbook. I want to specify that each new sheet is positioned to the right hand side of all other sheets in the book, so that the sheets are positioned in the order (when reading from left to right) that they are added.
I know about the Copy After:= thing but I only know how to specify copying after a particular sheet name. I could solve my problem by each time referencing the sheetname from the previously-created sheet, but I think there must be a way to it properly.
I execute code to open Excel, add a workbook, and then add a 4th worksheet to the workbook. The first time through the code it works like a charm. When I execute the code the second time, I get the following error: Error Number 1004, Method 'Sheets' of object '_Global' failed.
Dim xlApp As Excel.Application Dim xlWB As Excel.Workbook
Public Sub CreateCSVs(dtBeginDate As Date) On Error Goto HandleError Dim N As Integer Dim I As Integer Dim P As Integer Dim strDsrc As String Dim strDsrcDesc As String Dim strDsrcCode As String Dim strDsrcId As String Dim strDate As String Dim strTime As String Dim strFileName As String Dim strSheetName As String Dim strTableName As String..............
I have I command buttons on the sheet and when I delete a row, the postiion of the buttons is changing. Can I make it somehow so they never move when I add or delete rows?
There might be a really easy solution to this, I'm just having a tough time figuring it out. I have hyperlinks that link to cells on another sheet in the same workbook. I would like, after the cell is selected, for the selection to be positioned at the top of the sheet.
I want to automate the process of updating my football stats and have delved into getting my data from the web. I have managed to import a football league onto my "standings" sheet but I want my "strengths" sheet to read it's values from this new "standings" sheet.
The "standings" sheet is broken down into 2 tables (home & away) one above the other.
The values I want are Home Games, Away Games, Home Goals For, Away Goals For, Home Goals Against And Away Goals Against from both the home table and the away table. The main problem I have is that the cell information I need is likely to change as I update the league tables from the web. So say one week Team A's data is in row 7 the following week it could be in row 8 so i need the data to correlate with the team name cell in my "strengths" sheet.
So at the moment Atromitos Home games (cell B8 on my strengths sheet) needs the value from cell C8 on my "standings" sheet but by next week it could need the value from C9.
Ps I am assuming that I can just just hit the refresh button on the ribbon and the data from the web site will update. Is this correct?
I'm trying to summarize some data from an external workbook. The problem is that the worksheet names there are months (Jan2009, Feb2009 etc.) and the sheets rotate (change position) with time. In the summarizing workbook I would like to use a function to refer to (for example) cell A1 on the third worksheet, regardless of the current name of that worksheet. So I might have a cell in the summary workbook that looks something like "=CoolFunction(ExternalWB.xls, 3, A1)"
The problem I am having is in trying to make a custom cell format for inputting my data. I want it to appear as 44° 41' 5" (in the same cell). I would like the cell to function so that if im inputting data manually for it to automatically put in the appropriate (degree,minute or second marks). That way I could just enter somthing like 44 41 5 and it display properly. Also I am trying to keep the data in text format for another marco I am running to convert the DMS data into decimal.
I have created a macro that copies information from various cell on one sheet to another. When I run the macro the screen flickers about 5 times. Is there a way to stop.
I have an excel file (2003 version) with one sheet called sheet1.
On sheet1 I have multiple text boxes, however each text box has the same text box number "Text Box 1244" (this number appears in the top left-hand side in excel when I click the textbox).
I was wondering if it's possible to rename the text boxes based on their location on the sheet.
Eg. If i had a sheet with 5 rows of text boxes and 3 columns of text boxes (15 text boxes in total).
The top left-hand box gets renamed to "Text Box 1", then the text box below that gets renamed to "Text Box 2" and so on to the bottom of the sheet to "Text Box 5". Then the vba script would move to the text box that was to the right of the first text box (1st row again but 2nd column), and rename all the text boxes in that column ("Text Box 6" onward).
I'm stuck on this problem a while now and cannot find any scripts to solve it. My VBA is non-existent, I usually get by on bits of code I find on the web.
I hope each textbox has a hidden co-ordinate associated with it, then it might be possible to loop through all the textboxes based on their positions and rename them.
