I want the below coding to check if cells(i,9).value exists in range x4:x12, if yes cells(i,18).value should become "Pend to Audit" otherwise next.
Code:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim StateName, ST As Variant
Dim CName As String
Dim LastRow As Long
[Code] .........
I have a file having 9000 rows with S.No. 1,2,3,4 etc. ,in ascending order.It has downloaded from available system in the company.
Can it be possible the file be in the format of desired sheet ( attach file ) through macro working or excel formulaes which is best suitable for the achieving?
For more clarification, refer the attach file of download sheet and Desired Sheet.
I have a three or four letter abbreviation of a last name in A1. Column C contains a list of Last Names; column D contains a list of corresponding First Names; and column E contains a formula concantenating the First Names and Last Names from columns C & D.
I have the following formula in B1:
=VLOOKUP(A1,C1:E44,3,1)
I am attempting to match up the three or four letter abbreviation with the concatenated list to return the full name (First and Last) in cell B1, however, I'm not getting the desire result. I keep getting the name in the row just above the name I want.
I want to look up a value in a range of cells and then return a value in a cell in the same row containing the desired value, similar to a vlookup. Except I want to search through several columns for this value and I would like to have it find every occurance of the desired value and return a value in a cell n the same row of each occurance of the desired value.
View 2 Replies View RelatedAs part of a UserForm I am Validating and Formatting in one pass. The problem I'm having is that when the Validation fails, I get the error message, and the focus moves on to the next text box.
I want to trap the user in a loop until they have acceptable data
I'm trying to use the 'speaking cells' utility. Unfortunately, it seems to require a manual carriage return - I have tried offsetting and I have tried this (below), but to no avail:
Sub speak()
Range("A1") = "YES"
ActiveCell = vbCr
End Sub
Been working on this problem for a while, I need to have a vlookup (or other function) return locations based off of a concatenate (for unique identifiers). Only issue is that the concatenate formula creates doubles which returns the same location for each vlookup. I have attached an example file.
View 2 Replies View Relatedcreating a formula that will give me a result of either "W" or "L" depending on the amount in corresponding cell.
View 9 Replies View RelatedI need to figure out a formula that will look across a row and once it finds the criteria specified, it will return a value going down the corresponding column. I have attached a file showing the example.
View 3 Replies View RelatedI have this formula in C7:
=VLOOKUP(A7,A$20:C$76,3)
The Table Array contains a list of 12 months, and there will be a match to the Lookup Value in A7 each month. I would like C7 to reflect the last completed match in the list (it will be updated each month). So, when June is the last completed month, C7 will return the matching amount from the Table Array for June; then when July is completed, I would like C7 to reflect the matching amount for July.
I have tried searching for this topic and have been unsuccessful. Perhaps my search was too broad. Either way, I am trying to understand how to search/query a specific data entry among several sheets, and then return corresponding values from adjacent cells.
View 3 Replies View RelatedI created a drop down menu from a named data range on a seperate spreadsheet in the same workbook. Based on the selection from that drop down menu I want a preassigned number to pull into another cell. I'm not thinking of the correct formula or something, because it's not working. Could it be because it's text? My spreadsheet with the data is as follows:
Bridger to American Fork 051725
Hunter to American Fork 051725
Hunter to Delta 051715
Hunter to Hiawatha 051728
Navajo to Am. Fork w/ front 051725
Navajo to Am. Fork w/o front 051725
The 1st column is the origination/destination and I named that range "freight hauls". Which is what the dropdown menu on another sheet (AP Reconcilliation) consists of. From that, I want the 2nd column number to pull into another cell on the AP Recon sheet. The formula I wrote that isn't working is: =index('AP Reconciliation'!A2:B8,match(A6,'Freight Hauls List'!B2:B7,0),2)
I have in the attached file four variables, with their values in B3:B6, and the results of applying a formula to them in B8.
How to determine which value variable C must be changed to so that the formula returns the result in B10?
Solution.xlsx‎
I want to return a result IF a certain value is found in another cell. I've attached a sample workbook, but here's a description:
On the "Inventory" worksheet, in column H, I want to lookup the quantity in column B from the "Warehouse Response" worksheet. If the Part # in column E of the response sheet is NI1088106, I want THAT value to show under the NI1088106 part number, and I want the quantities for the NI1089106 to show under that part number. Ideally, the result of the formula would show a "0" if no data is found.
Here's the formula I tried beside the NI1088106 data, but it's not giving the desired results: =IF('Warehouse Response'!E:E="NI1088106", VLOOKUP(LEFT(A3,3),data,2,0))
What I want to do is, given the data in col. a, I want to supply a number(range) of strings which can be found in column a, whenever a string is found, which exists in given range, I want to write the string from the Key(col. c) in col b instead of the value from the string that matches a value.
See below for example of what I got working but not exactly what I was looking for
Col. A- Data
Orangegreen
Blackwhite
Blueyellow
Col. B - Result
Col. C - Keys
Orange
White
Yellow
I used
Code:
=INDEX(A1:A3,MATCH("*"&C1&"*",A1:A3,0))
This does produce a result, but not entirely what I am after.
This requires only one string to search for, and will in cell B1 result in a value of 'Orangegreen' as I can only supply one valeu to the function. What I want to do is supply the function with a range of values, and have those values outputtet in colb instead af the value of cells where the result is found.
I tried modifying the function to include a range, but that does not produce a valid result.
Any other day but today (I've been starring at numbers too long) I could do this.
I need a simple formula that will return:
a. 3 if resut is >= $2.5M
b. 2 if over >= $0.5M
c. 1 if
I have an excel worksheet that consists of 4 tabs. Each tabs has approximately 60,000 lines of data. The data consists of user id's and menus that correspond to the user id. There are 131 user id's in total. I would like to be able to return all the menus for one of the user id's. If we need to start with one tab and work from there, that's fine.
View 9 Replies View RelatedI've created a Database using excel which feeds data to a pivot table I created based on it. My objective is to create a new item in this pivot table (Pivot Table > Formulas > Calculated Item) which calculates the average data for the past 6 months.
The formula I used in order to get a result is this:
=IF(((May+June+July+August+September+October)/6)=0;;(May+June+July+August+September+October)/6)
and the problem is that the answer is 0 when there is no data for all 6 months (for example, there is a customer who hasn't baught anything during the past 6 months), the pivot table displays 0, instead of not showing this customer at all. My goal is for the IF function not to return any data if the result is 0, so that the pivot table doesn't show items with no data.
I also tried:
=IF(((May+June+July+August+September+October)/6)=0;"";(May+June+July+August+September+October)/6)
and also using ;" ";
but these formulas return #VALUE! in the pivot table, given that the Data is "SUM OF Sales" and "" is not a number.
How can I get the formula not to show anything at all?
In addition to this, I was wondering if it is possible to make this formula more automated, so that it calculates the average of the past 6 months, taking into account some type of reference month (rather than having to edit the formula each time a new month is analyzed).
Col ACol BCol CCol DCol ECol F
row 1811TAX CONSIDERATIONS1TAX CONSIDERATIONS
row 1911TAX CONSIDERATIONS#N/A
row 2011TAX CONSIDERATIONS#N/A
row 2121FLYING FALCON1TAX CONSIDERATIONS
row 2221FLYING FALCON#N/A
row 2321FLYING FALCON#N/A
row 2431IN COMMAND1TAX CONSIDERATIONS
row 2531IN COMMAND#N/A
row 2631IN COMMAND#N/A
I have 5 coulmns of data and in col F I have the following formula in row 18
=VLOOKUP(E18,$C$18:$D$800,2,FALSE)
the results come back " TAX CONSIDERATIONS"
however the same results comes back in row 21 and row 24......how can I modify this lookup to change when column B changes
I have a production planning spreadsheet that is updated every week from a database to a new sheet. This sheet is 'Sheet1', last weeks update becomes 'Sheet2'. Every day people annotate and colour cells for various orders, depending on their place within the planning scheme. It's really only the formats that I need to copy across, I could use the VLOOKUP function for the values - So I suppose you could say I'm looking for a VLOOKUP macro/VBA Code which keeps the original formatting (cell colour etc.)
View 2 Replies View RelatedAfter using a vlookup to find a value in a cell I want it to return the cell belows information.
View 2 Replies View Relatedif Cell F42 contains 50%, then my fomula returns "wrong"
=IF(AND(0%<F42,F42<50%),"F",IF(AND(50%<F42,F42<60%),"D",IF(AND(60%<F42,F42<70%),"C",IF(AND(70%<F42,F42<80%),"B",IF(AND(80%<F42,F42<100%),"A","wrong")))))
how do I get the formula calculate correctly?
When i have a formula standing at A3 fore example =A1-A2
and when i fill in a number like 100 at A1
And i fill in a number like 150 at A2 then at A3 where i had make my formula in there stands -50
Now i want the -50 not to disapear but instead there must be stand a 0(zero)
What is the formula i can use
i dont mind to put in at another cel like A4 for example
I have a list of people with SSN, about 3000. This list contains business done by each individual, which can be in all 50 states. I have another list of the same individuals with just their name and addresses and what we call "client number". I need to put the client number with the list for the individual states. See example list:
List of individuals with client numbers
123 John Doe
456 Jane Doe
List of individuals with state business
John Doe AR
John Doe CO
John Doe FL
John Doe MS
John Doe TX
Jane Doe MS
Jane Doe TX
Jane Doe AZ
I need for those client numbers to appear in the column before the names on list with states.
Example:
123 John Doe AR
123 John Doe CO
123 John Doe FL
456 Jane Doe MS
456 Jane Doe TX
621
532
249
I have these numbers located in column A (rows 1:3)
formula that will return my search result (in these case 532) as well as the information immediately above & below the location of cell that has my search info?
I have two workbooks Raw File and Lookup_Test, I want to find the value of Column A from Raw File, in Column A of Lookup_Test, if the value if found then i want the value in Column D from Lookup_Test, to be copied to the Column B of Raw File .
Well its like using vlookup , however i am trying to avoid using Vlookup and find any other way of doing the same.
I am working on a spreadsheet for some packages we are sending to multiple recipients. I have figured out how to get all the weights calculated, now my Mailing Manager has asked me to come up with a calculation for the actual postage amount for all the 1400+ packages...Unfortunately it is not as easy as that would seem.
There are 9 different mailing zones and each zone has 19 weight categories and each category has a corresponding postage amount for the package. So I need to come up with a formula to calculate the package postage amount based on those multiple categories.
For example:
Zone 1:
0-1lb = $2.12
1.1-1.5lb = $2.12
1.6-2lb = $2.21
etc
How do I go about entering in that information from which a formula can determine the proper package postage cost and what formula do I need to use in conjunction.
This is all done within a address list so each package is a row and all weights and zones will be in a separate column.
Package is in zone X and weighs Y pounds therefore the postage is Z. Something like that.
I am editing macro formula... is it possible VB does calculation during code execution & return only the value to Cell. this way the formula calculation remain hidden & code will probably run faster..eg.
Range("D3").Select
ActiveCell.FormulaR1C1 = "= COUNTA(Data!C[-3])-1"
Range("D3").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I need to calculate & keep only value not formula in excel sheet each time the macro runs. I am getting error
Worksheets("data").Range("D3").Value = Application.CountA(Data![C:C]) - 1
I seem to be having a little trouble with some of my code. It has worked previously without error. The variables CMvN and SkMvN are DIMed globally. The only thing that I recall that I have changed is that I have changed them from Double to Long. Changed it back to test and still experiencing problem.
' Filter named range using a named range on another sheet
Range("FilterRange").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:=Range("NormalMetroAM"), Unique:=False
CMvN = WorksheetFunction. Subtotal(101, Range("Cancelled"))
SkMvN = WorksheetFunction.Subtotal(101, Range("Skipped"))
When I put a break point in above it then enter:
? WorksheetFunction.Subtotal(101, Range("Cancelled"))
in the immediate window, the correct value (e.g. 8.57142857142857E-02) is returned. However, when I step through the code and go for example from CMvN line to SkMvN, the value isn't assigned to CMvN.
i have a sheet which adds up stock = SUM(F6-D6) (told u it was basic) what i want to do is if a negative number is the answer i want the sheet to change it to zero.
View 3 Replies View Related