is there ant way to clearly highlight command buttons on a userform that the program user selected (clicked on) ie change its clour or raise it etc so the user can easly see which button they have clicked on.
View 3 RepliesI have a workbook with multiple sheets and a different number of command buttons per sheet. How can I create a loop to color these command buttons? I have been successful at changing the size of the command buttons but not the color. The commandbutton is grouped with a chart.
Dim grp As Shape
stp = ThisWorkbook.Sheets.Count
strt = stp - 2
For a = strt To stp
b = 0
For Each grp In Sheets(a).Shapes
Sheets(a).Activate
Range("A1").Select
grp.Select
Selection.ShapeRange.GroupItems(6).Top = 100 'works
Selection.ShapeRange.GroupItems(6).BackColor = vbBlack 'doesn't work
Next grp
Next a
I have a userform button that when clicked loads another userform.
I am getting a Runtime Error 13: Type mismatch on the line in bold in the code below
Private Sub cmdAdd_Click()
Me.txtAdd.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
I do not get an error on the "Edit" button code which is similar so why is the above not working.
Private Sub CmdEdit_Click()
Me.txtEdit.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
Is it possible to have a round commandbutton in userform?
View 3 Replies View RelatedI have several buttons which, when clicked, pull up a range of data from another tab. Each button repopulates the appropriate cells with its specific data. I need to have an identification of which data set I'm currently viewing so was considering having the button, when clicked, change color or background/lettering colors swap, etc, until another button is clicked, then it changes color and the original button returns to the standard format. Is this possible? What type of button do I need to use?
View 1 Replies View RelatedI have a command button that I set to be disabled but I want it to become enabled as soon as 3 characters are entered into a textbox.
View 5 Replies View RelatedI have a Userform.Which is working perfectly to send data to excel sheet.
In the userform there is command button (commandbutton1) which is used to send data to excel sheet...This only send data but it actually does not save it into excel sheet.When I close excel sheet it asks do you want to save changes?
But I need when commandbutton1 is press to send data to excel sheet , it should actually save data into excel sheet.
[Code] .....
Is there an event that fires every time anything is clicked within a userform? I have seen the userform_Click() event however, this only works if the userform is clicked directly and not if something like an image is clicked on top of it.
View 1 Replies View RelatedI can't find a way to reset/clear the textbox in order to enter new data
View 2 Replies View RelatedI currently have a small userform placed at the bottom right of the screen (with a command button on it) and this opens up on top of excel instances and other applications/windows and it is set so that you can't interact with anything except the userform.
I wanted to minimize the userform and give focus to immediate next window (can be excel or non excel applications) for 10 seconds and then activate/show the userform back again, when the "Button 1" on the userform is clicked.
I tried hiding the userform, but this doesn't give focus to the immediate next window. Below is the code
Private Sub Button_Click()
Me.Hide
PauseApp (10)
Me.Show
End Sub
I could only find answers for adding minimize and maximize buttons to userform.
When the button is clicked, it should perform
Step a - Minimize the userform
Step b - Give focus to the next immediate window behind the userform
Step c - Wait for 10 seconds
Step d - Bring back the userform its to state.
I have a userform that has a combobox in it that also has an OK button and a Cancel Button. Need getting the combobox to pull in the correct list? The data for this list will be in cells A2 through A16. But not all 15 lines will always have data in them so I'd like to only show the ones with data. Then next issue i have is I would like the OK button on this userform to actually erase the data the user has clikced on in the combobox. It's a list of kids that the userform is asking which one needs to be deleted. So it might be the kid in cell A9. so when the user clicks on that kid in the combobox form a9 and hits ok I'd like to have all the kids below A9 move up one row.
Windows XP
excel 2003
I have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
What in the world did I do now? When I click on any cell, the cursor turns into a thick "+" . Then, when I move my mouse up and down the spreadsheet, all the cells the "+" touches become highlighted.
View 9 Replies View RelatedIs there a way to change the color of a msgbox? My option then appears to build a userform that basically does the same thing but allows me color selection.
Why is this important? I have a quasi-legal disclaimer that pops up every time the workbook is opened the first time (via a template). My boss has commented that after the first couple of times folks just blow through it without reading it (which is a fair comment).
My thoughts are to randomly change the color every time it opens, hoping that it might catch their attention. How do you control the text color to make sure it stays readable?
I have created a userform for the purpose of inputting data into a database, now one of the people who uses it wants me to make it so certain cells will be in a different colour if a button is selected, I can use this code to make the textbox change colour
Me.TextBox1.ForeColor = &H8000000D
but when I have the data in the textbox transfer to a cell in excel any colour change is lost, is there any way to get around this,
One of my commandbuttons will every now and then be covered by the FormulaBar, is it possible to assign a short key/ hot key for its function (CTRL+q)?
CommandButton's code:
Private Sub CommandButton3_Click()
Select Case ActiveCell.Interior.ColorIndex
Case xlNone: ActiveCell.Interior.ColorIndex = 3
Case 3: ActiveCell.Interior.ColorIndex = 6
Case 6: ActiveCell.Interior.ColorIndex = 10
Case 10: ActiveCell.Interior.ColorIndex = xlNone
End Select
End Sub
I have a large number of commandbuttons on a userform that I wish to apply captions to via a for loop. Each button is numbered appropriately for this purpose. e.g.
Button_1, Button_2 etc etc
I want the loop to compile a string that represents the button name e.g.
String = "Button_" & Loop_Count
and then use my defined commandbutton:
Dim My_Button as commandbutton
to name the buttons. So the loop would be something like:
for Loop_Count = 1 to 100
String = "Userform_Name.Button_" & Loop_Count
set My_Button = String
My_Button.caption = "Test_" & Loop_Count
next Loop_Count
Unfortunately trying to set 'My_Button' using a string like this doesn't work.
I have a commandbutton (CommandButton1) on a worksheet ("SCHEDULE"). I was wondering if there's a way to freeze the commandbutton on the bottom, on the right... I would like that, when you scroll down or to the right, the commandbutton doesn't move....
My code is:
Private Sub CommandButton1_Click()
Dim ScrollRw As Long 'Botón De comando parte inferior izquierda
Dim ScrollCol As Integer 'de la hoja "PROGRAMACION"
ScrollRw = ActiveWindow.ScrollRow
ScrollCol = ActiveWindow.ScrollColumn
Modulo1.BorrarTabla 'Código que borra la tabla
When I click a commandbutton to cut and paste columns I get the following error:
Select Method of Range class Failed
This is the following code I have
[Code] .....
Why this is happening?
I have a little problem with a userform commandbutton that I cannot resolve. I cannot seem to excecute a macro from a commandbutton, but if I go to the VBA project I can get it to work from there.
The cmb just calls a macro, which in itself call 5 other macros. This is the code for the button:
Can I use a commandButton too clear data out of my textBoxes. Been reading a lot and do not understand how,I'm the type of guy if you show me too the water I will drink it. I will send a example of what I want too do.
View 3 Replies View RelatedHaven't done a LOT with forms, but this should work (in my mind) and doesn't.
I'm using a ComboBox linked to a named range of "DATES" for a user to select a date. All I want to do is find that date in column A of the Sheet1.
I have a userform which collects fuel data from a pump and populates 2 worksheets (pump1) and (pump2). What I am tyring to accomplish is the following:
When fuelling is finished for the day, the operator selects the (Shutdown) button. When this happens I need the userform to perform the following.
1. For each worksheet (pump1) and (pump2) create new worksheets named (pump1_date) and (pump2_date).
2. Populate these new worksheets with the entire data from the original worksheets.
3. Clear out all but the last row of data from the original sheets. The last row contains the meter readings for the fuel pumps and needs to stay as an opening ballance for the next day. This last row to become the top row of the original sheet.
I've have a button to open a file on my first sheet When I click on the button a window pops up to open or cancel the action. There are no problems when I click OK to open the file. but when I cancel I get a runtime Error '287' Application-difined error.
View 4 Replies View Relatedlinking a CommandButton to another File. I made a CommandButton but would now like to know how to write the Macro to make that Button, when clicked, bring me to a file saved in Excel.
View 9 Replies View RelatedI have created a tool in excel to facilitate different requests from our sales force. A drop down list in the first worksheet lists the request types. Once the type is selected the user clicks a command button that sends the user to the corresponding worksheet specific to the request type.
My problem is that I need to verify that the cells on the specific worksheet have all been completed. I tried to verify when saving in the workbook module, but I don't know how to only check the selected request worksheet.
One thought was to insert save command buttons on each worksheet and only allow saving through those buttons. (So I would need to remove any saving functionality from the file menu/toolbar.) Then I could attach the verification code to that button on each worksheet. Preventing saving until the requested data was entered.
If this methodology will work I need to know how to do the following:
1) remove alternative saving methods
2) Once those methods are removed, how do I code a command button to check that specific cells are not null and then "save as".
3) if cells are null then, stop save and show msgbox.
I am working in Excel 2003.
I am trying to make a calculator inside of Excel...learning how Text Boxes work in conjunction with CommandButton. I am trying to code the button to display inside of the text box. I have never coded a text box before to do anything like that
note: For right now i am just looking at being able to click on a button [numbered 0-9] and have them dsplayed inside the text box. After that I want to be able to set up an addition, subtraction, etc button to actually have the math done.
how to create commandbutton code so let me explain what I am trying to do and anyone that could provide me with some basic code details to solve my problem:
When the command button is clicked in an excel worksheet I want a pop up box to come up containing specific information sourced from two other excel worksheets depending on the commandbutton. What I want to know is what code do I enter from the visual basic view in order for the box to appear with the right information.
Is there any way to bind a Commandbutton to a cell's location, so that when column widths or row heights are shifted, that the CommandButton moves with the cell?
View 3 Replies View RelatedI'm trying to loop through several objects and fire their "Click" events, but I'm not sure how to get it to work.
Below is an example of what I was trying to do. There are 3 objects with the name "CommandButton(1-3)".
Private Sub RunAll_Click()
Dim obj As Object
For i = 1 To 3
Set obj = UserForm1.Controls("CommandButton" & i)
obj_Click
Next i
End Sub