When I click a commandbutton to cut and paste columns I get the following error:
Select Method of Range class Failed
This is the following code I have
[Code] .....
Why this is happening?
I have a form with 2 buttons and a frame. Inside the frame I have another button. I get a Type Error Message when I run the code and I don't understand why.
View 3 Replies View RelatedCode:
Sub MoveColumns()
Dim src As Worksheet
Dim tgt As Worksheet
[Code]....
Anyway the above code is meant to take 5 columns of data and paste them in the next row below the last populated row but it keeps overwriting the data already on SheetX.
I am trying to copy a range of cells and Need to transpose the values. Easy Enough? When I right-click and paste special, it gives me a new window with an array of options but not the standard Paste special value screen. I have used the others in the past and just pasted text. However this does not give me the paste transpose option which is what I need.
I am sure this is a User error where there is something about the way that I am copying this information but I am Drawing a Blank...
My goal is to get all numbers that are negative in my A column to be positive.
I filter column A to show only records with negative numbers (there are now hidden cells) (simple example, A2=-1 , A3=2, A4=-3, filter so I can now only see A2 and A4). I insert a column (B) and do "=abs(A1)" and drag that down. This works to get the absolute value of column A into column B, for only the visible records. (so I still only see rows 2 and 4; B2=1, B4=3)
Now the hard part. I want to copy these numbers to column A, but only paste to visible cells. I highlight my data range in column B and hit Alt + ; to only select visible cells. Now I hit Ctrl + c to copy. If I then click on the first cell in column A that I want to paste to and hit Ctrl + V, the data is pasted in all cells, no spaces, filling in the hidden cells, which I do not want (in my example the 1 from B2 goes to A2 and the 3 from B4 goes to A3).
If I select my entire 'paste to' data range in column A (A2:A4), hit ALT + ; to select visible only, and hit CTRL + V to paste, it tells me "This command cannot be used on multiple selections".
AOther postings of seen seem to intimate that my first attempt described here should work (select visible only, copy, then paste), but doesn't! i can copy visible only easily enough, but when I paste, it ALWAYS pastes into all rows, hidden or not.
The code below pastes an array formula on the given range. However, it results FALSE and it does not paste as an Array formula. How can I fix it?
Sub copy_Time_Spent_by_Ticket_Formula()
Dim SheetName As Variant
For Each SheetName In Array("Calculations")
With Worksheets(SheetName)
[code].....
Why isn't my copy and paste working between workbooks? We use excel 2000. I've resorted to using a lot of selection because I can't seem to figure out what is going on otherwise...
I'm sure this should be much simpler...
Sub PortData()
Dim wbA As Workbook, wbB As Workbook
Dim ws1 As Worksheet, ws2 As Worksheet, ws3 As Worksheet, ws4 As Worksheet, ws5 As Worksheet, ws6 As Worksheet
Dim sPath As String, sName As String, bTextSwitch As Boolean
Dim nLast As Long
Dim i As Long
I copied and pasted text (last names) from Website A into File A. Then did the same from Website B into File B. I wrote index match formulas to compare columns between files. I've done this literally hundreds of times, and it's always worked. This time, however, I get ZERO matches - even though there are lots of them. Troubleshooting was straight-forward: it has to be website B. (Strange thing is, I HAVE used text from website B before in similar applications with no problems.) Something in the way they present the data is preventing matches. (Everything works when I manually type over text from Website B.) It's not an upper case/lower case problem. I tried copy-pasting values only - to no avail.
View 4 Replies View RelatedWe have a document template set up in excel which we have to use to accompany documents/drawings issued to customers. I have a macro set up to copy the cells required in the template and create a new tab with our company reference as the tab name, then copy and paste the relevant data into the log.
We could be issuing one or up to 10 documents at the same time to the customer, therefore there are between 1 and 10 rows which could contain data. Due to this, when pasting to the log, I have asked the macro to choose the next available row and paste as values and skip blanks.
However, when there are blanks on the template, it is copying all these cells and I am being left with lots of blank rows in the log. Is there anything I can do to correct it?
I am working on Excel 2000. I am creating a protected worksheet which will have conditional formatting and validation on manual input cells (formatted to light yellow). I want to make sure that people do not accidently forget and paste data into those cells. I read up on solutions from this thread; [url] and most of it seems to be more complex than what I needed (and I couldn't get it to work)
I copied some code from this website post
[url] to my worksheet.
It works fine if the Validation criteria is set up simultaneously (i.e. it's all the same) but does not work if the columns have different validation criteria. How can I modify it to work under those conditions? I have included two workbooks, one in which the val critieria is identical (and it works) and one in which it varies between columns (and it doesn't work). I also noted that if I modify the one that doesn't work to make it homogenious, it still doesn't work unless I go back and highlight all and reformat that way.
dear friends when i am enter data manually this macro work fine.but same data I'm copy & paste macro not working.pls help me..
Sub REQD_KILOS()
Dim c As Range, MyString As String
Application.ScreenUpdating = False
For Each c In Range("J3", Range("J" & Rows.Count).End(xlUp))
MyString = Cells(c.Row, 6) & Cells(c.Row, 7) & Cells(c.Row, 8)
Select Case UCase(MyString)
Case "5000MSSP40/2"
c.Offset.Offset(, 1).FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]*0.145)"
Case "4000MSSP40/2"
c.Offset.Offset(, 1).FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]*0.115)"
Case "2000MSSP40/2"
End Select
Next c
Application.ScreenUpdating = True
End Sub
I've been working on a particular spreadsheet and I've just noticed that
double clicking the format painter will only format one cell. It won't
retain the format to be put into the next selected cell which it should when
its double clicked. The same goes for copy and paste. Normally once you've
copied something you can paste it into a number of cells individually, one
after the other, but after the first paste selection, the paste option is no
longer available. I can't see any settings under options to fix this. What has happened, and how do I fix it? (I'm using Excel 2003 SP1 - is there a SP2?)
Excel 2007, Windows XP Pro
Dim strLoan As String
Dim longCat As Long
Dim rHere As Range
Range("A1").Select
[Code] .....
I can see the cursor move to all the desired cells when this macro executes; it just isn't dropping any data where it should be. I have been working at this stage for the last five hours with no success. I don't know whether my copy-paste methodology is broken or if it is my selection criteria
One of my commandbuttons will every now and then be covered by the FormulaBar, is it possible to assign a short key/ hot key for its function (CTRL+q)?
CommandButton's code:
Private Sub CommandButton3_Click()
Select Case ActiveCell.Interior.ColorIndex
Case xlNone: ActiveCell.Interior.ColorIndex = 3
Case 3: ActiveCell.Interior.ColorIndex = 6
Case 6: ActiveCell.Interior.ColorIndex = 10
Case 10: ActiveCell.Interior.ColorIndex = xlNone
End Select
End Sub
I have a large number of commandbuttons on a userform that I wish to apply captions to via a for loop. Each button is numbered appropriately for this purpose. e.g.
Button_1, Button_2 etc etc
I want the loop to compile a string that represents the button name e.g.
String = "Button_" & Loop_Count
and then use my defined commandbutton:
Dim My_Button as commandbutton
to name the buttons. So the loop would be something like:
for Loop_Count = 1 to 100
String = "Userform_Name.Button_" & Loop_Count
set My_Button = String
My_Button.caption = "Test_" & Loop_Count
next Loop_Count
Unfortunately trying to set 'My_Button' using a string like this doesn't work.
I have a commandbutton (CommandButton1) on a worksheet ("SCHEDULE"). I was wondering if there's a way to freeze the commandbutton on the bottom, on the right... I would like that, when you scroll down or to the right, the commandbutton doesn't move....
My code is:
Private Sub CommandButton1_Click()
Dim ScrollRw As Long 'Botón De comando parte inferior izquierda
Dim ScrollCol As Integer 'de la hoja "PROGRAMACION"
ScrollRw = ActiveWindow.ScrollRow
ScrollCol = ActiveWindow.ScrollColumn
Modulo1.BorrarTabla 'Código que borra la tabla
Is it possible to have a round commandbutton in userform?
View 3 Replies View RelatedI have a little problem with a userform commandbutton that I cannot resolve. I cannot seem to excecute a macro from a commandbutton, but if I go to the VBA project I can get it to work from there.
The cmb just calls a macro, which in itself call 5 other macros. This is the code for the button:
Can I use a commandButton too clear data out of my textBoxes. Been reading a lot and do not understand how,I'm the type of guy if you show me too the water I will drink it. I will send a example of what I want too do.
View 3 Replies View RelatedHaven't done a LOT with forms, but this should work (in my mind) and doesn't.
I'm using a ComboBox linked to a named range of "DATES" for a user to select a date. All I want to do is find that date in column A of the Sheet1.
I have a userform which collects fuel data from a pump and populates 2 worksheets (pump1) and (pump2). What I am tyring to accomplish is the following:
When fuelling is finished for the day, the operator selects the (Shutdown) button. When this happens I need the userform to perform the following.
1. For each worksheet (pump1) and (pump2) create new worksheets named (pump1_date) and (pump2_date).
2. Populate these new worksheets with the entire data from the original worksheets.
3. Clear out all but the last row of data from the original sheets. The last row contains the meter readings for the fuel pumps and needs to stay as an opening ballance for the next day. This last row to become the top row of the original sheet.
I've have a button to open a file on my first sheet When I click on the button a window pops up to open or cancel the action. There are no problems when I click OK to open the file. but when I cancel I get a runtime Error '287' Application-difined error.
View 4 Replies View Relatedlinking a CommandButton to another File. I made a CommandButton but would now like to know how to write the Macro to make that Button, when clicked, bring me to a file saved in Excel.
View 9 Replies View RelatedI have created a tool in excel to facilitate different requests from our sales force. A drop down list in the first worksheet lists the request types. Once the type is selected the user clicks a command button that sends the user to the corresponding worksheet specific to the request type.
My problem is that I need to verify that the cells on the specific worksheet have all been completed. I tried to verify when saving in the workbook module, but I don't know how to only check the selected request worksheet.
One thought was to insert save command buttons on each worksheet and only allow saving through those buttons. (So I would need to remove any saving functionality from the file menu/toolbar.) Then I could attach the verification code to that button on each worksheet. Preventing saving until the requested data was entered.
If this methodology will work I need to know how to do the following:
1) remove alternative saving methods
2) Once those methods are removed, how do I code a command button to check that specific cells are not null and then "save as".
3) if cells are null then, stop save and show msgbox.
I am working in Excel 2003.
I am trying to make a calculator inside of Excel...learning how Text Boxes work in conjunction with CommandButton. I am trying to code the button to display inside of the text box. I have never coded a text box before to do anything like that
note: For right now i am just looking at being able to click on a button [numbered 0-9] and have them dsplayed inside the text box. After that I want to be able to set up an addition, subtraction, etc button to actually have the math done.
how to create commandbutton code so let me explain what I am trying to do and anyone that could provide me with some basic code details to solve my problem:
When the command button is clicked in an excel worksheet I want a pop up box to come up containing specific information sourced from two other excel worksheets depending on the commandbutton. What I want to know is what code do I enter from the visual basic view in order for the box to appear with the right information.
Is there any way to bind a Commandbutton to a cell's location, so that when column widths or row heights are shifted, that the CommandButton moves with the cell?
View 3 Replies View RelatedI have a workbook with multiple sheets and a different number of command buttons per sheet. How can I create a loop to color these command buttons? I have been successful at changing the size of the command buttons but not the color. The commandbutton is grouped with a chart.
Dim grp As Shape
stp = ThisWorkbook.Sheets.Count
strt = stp - 2
For a = strt To stp
b = 0
For Each grp In Sheets(a).Shapes
Sheets(a).Activate
Range("A1").Select
grp.Select
Selection.ShapeRange.GroupItems(6).Top = 100 'works
Selection.ShapeRange.GroupItems(6).BackColor = vbBlack 'doesn't work
Next grp
Next a
I'm trying to loop through several objects and fire their "Click" events, but I'm not sure how to get it to work.
Below is an example of what I was trying to do. There are 3 objects with the name "CommandButton(1-3)".
Private Sub RunAll_Click()
Dim obj As Object
For i = 1 To 3
Set obj = UserForm1.Controls("CommandButton" & i)
obj_Click
Next i
End Sub
From the Control Toolbox I click on the command button icon. I positon the mouse where I'd like to place the command button and draw the command button. Then right click to open the drop down menu. A few days ago in the drop down menu I had an option Assign Macro but now I don't have it anymore. How is it possible to assign macros to the command button and even better how can I get the Assign Macro option back in the drop down menu?
View 2 Replies View Related