Color Cell Recieving UserForm TextBox Data

Feb 25, 2008

I have created a userform for the purpose of inputting data into a database, now one of the people who uses it wants me to make it so certain cells will be in a different colour if a button is selected, I can use this code to make the textbox change colour

Me.TextBox1.ForeColor = &H8000000D

but when I have the data in the textbox transfer to a cell in excel any colour change is lost, is there any way to get around this,

View 9 Replies


Color Cell Fonts Based On Text Color Of TextBox Controls On UserForm

Apr 11, 2008

I have got a userform with lots of controls,

One of the action's on a large group of the controls is the same but except for one number

here is an example

If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3

This makes a cell that correlates to the textbox red if the text in the textbox is red.

Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.

Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?

View 3 Replies View Related

UserForm – Data From TextBox To Cell Then Cell To TextBox

Aug 23, 2009

I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.

View 9 Replies View Related

Pull Data From Cell To Textbox On Userform

Jul 4, 2013

Userform I've created. It's not for inputting data, just for displaying and linking to data.

I have a textbox on a userform that I would like to display exactly what is written in cell C5 of sheet1. I don't want the user to be able to edit it, just for it to display the same as C5. Any better way of doing it than using a textbox that would be good also.

View 2 Replies View Related

Add A Textbox At The Current Position (selected Cell) With A Set Size, Fill Color, And Border Color

Nov 2, 2008

I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this:

View 2 Replies View Related

Get Data From UserForm (TextBox, ListBox)

Feb 4, 2010

I spent so long time to fix this problem, but it seems that I can't go on. I have a simple question. How can I get the data from the UserForm and use it in the worksheet? Everything works fine, only the UserForm makes problems. Here is the

View 4 Replies View Related

Userform Textbox Data Entry

Jun 13, 2007

I have created a userform with a texbox and a "continue" button. In my macro I first ask the user to input name, date, etc then I have a line that says "frmDiscrepancies.Show". This code shows the userform but I am unable to type anything into the textbox. How do I activate the textbox so that I can type in it? Of course the next step is to be able to click on the command button "continue" and have it continue with the macro...

View 9 Replies View Related

Transfer Userform TextBox Data To Worksheet Combobox

Jun 1, 2007

I am trying to create a userform to allow user to register their new team member. In the userform, I have textbox1 (new team member) & textbox2 ( name of their leader). Once both the textbox has been filled, the user need to click on the commandbutton, which will then add the newly registered team member to the combobox1 in the Sheet1 and then create a spreadsheet(tab with the Team member name) in a separate workbook, which corresponde with the name of their leader (as filled in textbox2 in the userform.

View 2 Replies View Related

Find UserForm ComboBox Value & Transfer TextBox Data To Same Row

May 6, 2008

My question is, instead of deleting the row, how can I use the combobox to replace that row with the updated info rather than delete and resort? I have a combobox that selects names from a sheet, column A and populates itself on Userform activate/initalize. Using the Combobox to select a name, this code below populates all the fields on the form, various text and comboboxs.

When users hits the update button, it currently finds the row and deletes it, see second code example, but this reaks havoc on various parts of the program, I have to move the combobox and add name textbox's because when it deletes the row, the combobox takes on the next rowsource and then writes that info, rather than the info selected.

Private Sub ComboBox1_Change()
If bBlockEvents = True Then Exit Sub
If ComboBox1.Value = "" Then
bBlockEvents = True
ComboBox1.ListIndex = -1
bBlockEvents = False
Exit Sub
End If
userow = ComboBox1.ListIndex + 3
usercolumn = 1
If userow = "0" Then
ComboBox1.Value = ""

View 6 Replies View Related

Copy Cell Value To Userform TextBox

Jul 14, 2014

I have a userform that my staff use to enter the files they are working on. I have a button they click to launch the userform, then they need to input a 'Track Number' the access the details of the file.

Currently, they enter the track number manually that they see from a list on a sheet.

I have found the code below that enables them to click on the file, listed on the sheet and it automatically launches the userform.

What I am after, is the next step, it copies the track number in the cell they click in, but I would like the code to PASTE into the first textbox the copied Track Number.


Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Selection.Count = 1 Then
If Not Intersect(Target, Range("B4:B25")) Is Nothing Then
Application.Run "'FOI & ROI Record Management.xls'!Launch.Launch"


View 9 Replies View Related

Copy Cell Value To UserForm TextBox

Dec 28, 2012

I have a form that is used for updating jobs on a worksheet. I want a txtAssetsJob on the form to display the value that is in a cell in column "E". The row is set up as iRow and is based off of a selection in a cboJobNumber2. Everything else on the Form works great, I just can't get the textbox to display the value.

I have also noticed that I can still put letters into the txtboxes and it copies them to the worksheet. I think I have them formatted correctly.

Private Sub txtAssetsJob_Change()
Dim iRow As Long
Dim rng As Range


View 5 Replies View Related

Show Cell Value In Textbox Userform

Mar 2, 2009

how to show a value in textbox form. So i have some columns in an excel file , but i want to show the last cell value of the column Amount in the textbox.

View 9 Replies View Related

Link Cell To Textbox On UserForm

Dec 21, 2007

I am creating a user interface for inputing info into a sales order, and then printing the sales forms already pre-filled based on the user's input. SO, I need the user to be able to type text into a textbox that is in a multipage control that is in a userform, and then have it automatically populate a specific cell in my workbook. Seems like this should be relatively simple, but I am just getting started with vba and can't seem to figure this out.

View 3 Replies View Related

Enter UserForm TextBox Into Cell

Dec 24, 2007

I am having trouble using User Forms.

I am trying to enter data using User Forms to apply to a specific cell.

For example the user enters text or a number value into a text box and clicks a command button to submit that information into a specific cell. In this case D43.

View 4 Replies View Related

Link Userform Textbox To Cell

Jan 2, 2008

How do I refer to the contents of a userform's textbox on a worksheet?

The userform will be opened, edited, and closed by the user. I would like to be able to refer a cell on my sheet to that textbox so that they always have the same content.

View 7 Replies View Related

VBA Coding To Search Column For Data Entered In Textbox On Userform

Apr 17, 2014

I am a green as green can be beginner to VBA coding. My question is, I created a text box on my user form so the user can input a 'billing code' and when they hit submit on the user form, the vba will search the spreadsheet and land on the data entered in the text box.

View 3 Replies View Related

Update UserForm Textbox To New Active Cell?

May 14, 2014

I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.

Private Sub UserForm_Activate()
TextBox1.Text = ActiveCell
End Sub


View 3 Replies View Related

Error When Trying To Display Cell Value In Userform Textbox

Jul 25, 2014

I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.

I am trying to display the vlookup results in a 4th textbox on my userform.

If I use this code:

[Code] ......

I receive a type mismatch error

if i use THIS code:

[Code] ..........

if works fine!?! what gives?

View 4 Replies View Related

Make Textbox In Userform Equal Cell Value?

Jan 27, 2014

I am trying to make my textbox on the userform equal a cell value in a column. I need the userform to look at the last cell that has a value in a column and display that value into the textbox on the userform.

Ex. I am starting my data from Cell "O8" and the last possible row would be "O51" Starting with O8 I need my textbox in the userform to read this cell value. After each entry the next row in Column O will have a value, so I would need my userform textbox to read cell "O9" value the next time the user form opens. Here is what I got thus far:


It gives me a Compile Error: Invalid or unqualified reference.

View 3 Replies View Related

Userform Textbox And Label Change From Cell

Apr 19, 2008

I want a floating userform (showmodel = false) to display the results of a cell.

On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.

I want the same results on a userform.

I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.

As i want this for display purpose only can i use the label for the above problem

View 9 Replies View Related

TextBox In UserForm To Show Cell Value Instantly

Nov 3, 2009

I have two TextBoxes (txtSpan & txtTrib) in a UserForm (frmSizes), when values are entered in these TextBoxes they show (as they are typed) in cells of the spreadsheet. The resulting calculation is in cell B11.

How do I get the value in cell B11 to show in a third TextBox (txtAns) as soon as it is calculated without closing the UserForm or running another code?

View 8 Replies View Related

Custom Format In Cell From Userform Textbox

Nov 11, 2009

On the attached example, there is a user form with a text box and an enter button.

What i want, is when i press the enter button, the value in the text box goes into cell B2 on sheet1 in the format of "?/???".

View 2 Replies View Related

Select A Cell To Autofill Userform Textbox

Jul 2, 2012

I current have code that fills in textboxes in a userform with values in cells:


Private Sub CODE_Change()
Dim ws As Worksheet
Dim fm As Worksheet
Set ws = Worksheets(ActiveSheet.Name)
Set fm = Worksheets("Form")


How to I modify the lines under Checkbox1.Enabled = False so that they only take a section (of varying size) of the text in a cell and put it in textboxes in a userform?

ie. The text in a cell is "Outer: A123 ; Inner: B456." I would like A123 to appear in a textbox called OuterColor and B456 to appear in textbox called InnerColor

View 4 Replies View Related

How To Avoid Duplicates In One Cell From Textbox In Userform

Jun 19, 2014

Is there a way to avoid a textbox value from being entered into the same cell on a worksheet more than once.

I am building a BOL(Bill Of Lading) wizard. Within the userform the end user will input the part numbers and quantities to be shipped... it also has a textbox that will hold the PO number that each part belongs to. I have a command button that says Add to Pallet 1. Pallet 1 will be on a row by itself on the excel sheet. Parts belonging to different PO#'s can be on this 1 pallet. When the end user clicks the "add to pallet1" button... the PO textbox (textbox6) value will be sent to (Sheet3) Cell I28. If, for example, PO# 12345 has already been added to (sheet3) Cell I28 and then the end user plugs it in again, i would like for it to be discarded and a message box stating this PO Number has already been accounted for...

so you get a better understanding...

Qty's... part numbers and PO#'s for Pallet 1 will be on row 28. Multiple PO#'s will fit into Cell I28 seperated by spaces and i will do wrap text.

Qty's...part numbers and PO#'s for Pallet 2 will be on row on and so on...

View 1 Replies View Related

Link UserForm TextBox To Last Used Cell In Column

Oct 8, 2009

I am building a userform which also needs to display current data from a cell in the most recent row of a worksheet. This current data and all userform selections are then to be written to a row in a separate worksheet. I have not been able to properly reference the current data; My (rookie) approach intended to set the ControlSource properties of a TextBox to the desired current data.

Private Sub CommandButton1_Click()
'Begin form
' find last gps reading

Dim LastRow As Long
Dim Source As Worksheet
Set Source = Worksheets("Sheet1")
Set Dec = Worksheets("DecimalForm")

View 4 Replies View Related

Transfer TextBox Date From Userform To Cell

Jul 26, 2007

I have a userform with many textboxes that I am using to collect data which is transferred to a worksheet using a command button on the userform. All data is correctly transferred to the worksheet except for the text box I am using for the date.

The date is transferred from the userform to the spreadsheet but the date is left justified implying that it is text but dates that I have manually entered into the spreadsheet cell are right justified. This may seem picky but I am using a 'count' function within the spreadsheet to determine how many rows contain the date.

I am using the following code which I am entering in the format of dd/mm/yyyy, to to transfer the date to Cell A1 the worksheet 'Results'.

Private Sub CommandButton1_Click()
Worksheets("Results").Cells(1, 1) = UserForm1.Textbox1
End Sub

how to transfer the date to the cell so that it right justified, hence treated as a number within the cell.

View 6 Replies View Related

Link UserForm TextBox To Cell For Editing

Jun 14, 2008

I'm trying to make a userform to edit cell A1. So, by pulling up a macro (with other content in there already), how do I display the value in A1, and also have a button to modify its value/change it.

View 2 Replies View Related

Populate Cell Comment Text In UserForm TextBox?

Jul 4, 2014

I have a table with huge amount of data. I use a UserForm with textboxes to populate the information of the required row.

There's a Comment Box text on a specific cell that I need to populate on one of the textboxes but I am unable to do it.

The code I have that works well, populates the cell content:


Now, on that cell, there's a comment text that I need it populated as well on another textbox but it doesn't work. I tried:

[Code] .....

But this doesn't work.

View 8 Replies View Related

Variable Declaring. Textbox On Userform To Show Value Of A Cell

Sep 25, 2006

Users select a row number which then opens up a Userform. Comboboxes and Textboxes on this Userform are then populated with coloumn values (dependant on the row initially selected). If the row number was the same each time I could accomplish this by the following.

Private Sub TextBox1_Enter()
TextBox1.Value = Range("a1")
End Sub

but as its a variable I'm trying the following (which I think should work)

Private Sub TextBox1_Enter()
TextBox1.Value = Range("a" & edi & "")
End Sub

I think I need to declare the variable 'edi' as Public. If so where should this be? I've tried 'Genereal Declaration'

View 4 Replies View Related

Conditional Formatting Userform Textbox Based On Textbox Value?

Jul 3, 2014

I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):

[Code] ........

What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved